Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner bellows sizes.  (Read 1542 times)

0 Members and 1 Guest are viewing this topic.

Keithypete.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 917
Hohner bellows sizes.
« on: September 17, 2012, 08:47:23 PM »

I'm wondering which Hohner bellows are interchangeable. Would the bellows from a Pokerwork fit a Presswood? What about their one row Pokerwork style boxes - no stops 4 bass buttons?
Logged
Beltuna Sara II - B/C flavour.
Borsini - G,D,A.
Pokerwork B/C.
PRIMATONA IV, B/C.

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Hohner bellows sizes.
« Reply #1 on: September 17, 2012, 09:27:55 PM »

Generally speaking Pokerwork & Presswood are the same, including the one rows (which obviousy have less folds)
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner bellows sizes.
« Reply #2 on: September 17, 2012, 09:52:40 PM »

The one rows with stops eg 112 113 and 114 have thicker bellows frames than the pokerwork/erica models so are only interchangeable by gluing the frames from the target box onto the bellows you want to use.  Some of the very old two row boxes also have marginally thicker frames, but close enough that they will fit if the wood is very carefully cut back, but generally all the two row boxes will let you swap bellows. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal