Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Hohner Compadre B/C/C#  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

LDbosca

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 674
Hohner Compadre B/C/C#
« on: September 08, 2010, 11:54:30 PM »

Hi all,

I know there's been a few threads on these boxes, I wasn't sure whether to add to one or start one but I went with starting a new one in the end.

I know there's a B/C/C# Compadre available and I've taken a notion (one that I might never follow up, be forewarned!) that I could get one for the purposes of learning jazz. I have a B/C Erica and I was thinking I could either use that to correct the accidentals included on the first button of each row by Hohner and use the B/C/C# or else use rearrange the reeds (and use the Erica reeds) to give a Pignol/Milleret layout that would be fully chromatic on the pull.

So, I need to know if Erica reeds will fit in the Compadre's blocks and if rearranging reeds to a different layout is feasible.

Also, any feedback about the instrument's playability would be great. I know I can't expect too much for the price but I am very used to high-end boxes so I suppose it's a consideration.

Thanks,
Luke.

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Hohner Compadre B/C/C#
« Reply #1 on: September 18, 2010, 01:51:20 AM »

Yes, the reed plates from an Erica will fit on compadres blocks. You may have to shim or remove material from the reed block as neccesary to adjust for height. If you live in the states reed plates are available directly from Hohners service dept. Most reeds are in stock.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal