Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Cutting angle for bellows?  (Read 1511 times)

0 Members and 1 Guest are viewing this topic.

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Cutting angle for bellows?
« on: January 20, 2011, 01:38:23 PM »

I am practicing bellows making by making a rectangular bellows for a tuning rig.

What angle should I cut the ends of each section for proper operation?


(It's folded from grey board. The board I got is too thick, it's 2mm and didn't bend nicely, but it was cheap and will do for the present requirement).

Also, I've seen references to man-made materials used for gussets. Mainly out of curiosity, anyone know what materials are used?

Ta,

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Cutting angle for bellows?
« Reply #1 on: January 20, 2011, 01:48:05 PM »

As far as I understand, the precise angle isn't critical as long as it's less than 45 deg, in order to allow space for the leather gussets to work. I'd guess something around 40 - 42 deg would do nicely. While the exact angle isn't critical, it IS important that all the angles are identical - probably a cutting jig is the most reliable way of achieving that.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Cutting angle for bellows?
« Reply #2 on: January 21, 2011, 03:52:19 PM »

Nothing to do with melodeons but you may find Bob Tedrow's concertina bellows making series interesting, this has now been incorporated into a much longer series on building an accordion reeded concertina from scratch. Bellows making starts on Day 6, third row of photos down.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Cutting angle for bellows?
« Reply #3 on: January 21, 2011, 06:01:19 PM »

I've looked long and hard at his bellows but still haven't worked out to fit them to my Pokerwork...

Actually his videos are very interesting.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal