Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: MIDI - Sample sets and chords  (Read 5007 times)

0 Members and 1 Guest are viewing this topic.

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
MIDI - Sample sets and chords
« on: January 31, 2011, 03:10:19 PM »

I mentioned in another thread that I am working on a MIDI melodeon idea. Does anyone have a melodeon sample set that they would be willing to share with me? Or know where one can be downloaded?


Related to this I have been wondering what notes do MIDI melodeons (e.g. Streb) send for the chord buttons. Obviously it could send three notes for that button but if I were to sample the chords from a real melodeon I would have only one sample that would want to be triggered by that button.

I think the easiest way to handle this would be to just send the root note of the chord and have the appropriate sample triggered by this. The alternative would be to sample each note of the chord seperately somehow and send all three notes. This would have the advantage of working with standard non-melodeon sample sets.
Logged

Alan Morley

  • Alan Morley
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1190
    • Soundcloud
Re: MIDI - Sample sets and chords
« Reply #1 on: January 31, 2011, 04:14:04 PM »

I have MIDI sounds, but they are SF2 SoundFont files which play with SoundBlaster soundcards - I dint know it regular midi would work them....

If SF2 would be ok - I can email to you - it's a full midi sound bank though with everything..

Alan
Logged
ISIS Melodeon, Hohner Erica,  Fender Strat Plus, Takamine, Hofner Violin Bass, Hohner CX12 Harmonica, etc..

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: MIDI - Sample sets and chords
« Reply #2 on: January 31, 2011, 04:15:26 PM »

If you want the ability to remove the third in the chords then you would need either two, or three samples.  Two would be full chord and third removed chord.  Three would be single notes.  In a design I did some years ago the chord button made contact for all three notes and the third was easily switched out if not wanted.  More modern designs allow total programming of every button.

I was going to give a web address for the 'moolodeon' but all the pages seem to have been removed.  May have been useful as he had done all the detailed work for making a complete instrument very cheaply using proprietary parts from Maplin and the like.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: MIDI - Sample sets and chords
« Reply #3 on: January 31, 2011, 04:53:10 PM »

If SF2 would be ok - I can email to you - it's a full midi sound bank though with everything..

SF2 is ideal but I already have a general midi soundbank. I'm specifically looking for a sampled melodeon. If you have that in SF2 then I would love a copy :-)

If you want the ability to remove the third in the chords then you would need either two, or three samples.  Two would be full chord and third removed chord.  Three would be single notes.  In a design I did some years ago the chord button made contact for all three notes and the third was easily switched out if not wanted.  More modern designs allow total programming of every button.

I was going to give a web address for the 'moolodeon' but all the pages seem to have been removed.  May have been useful as he had done all the detailed work for making a complete instrument very cheaply using proprietary parts from Maplin and the like.

I did look at the moolodeon stuff (which was very cool). Unfortunately he used Arduino for his project and my expertise is all in a different microcontroller architecture (PIC) so I've gone with that.

I have the ability to program every button but I can't decide how best to program it to work with real melodeon samples. The most flexibility would come from having three separate samples and sending three separate notes. The problem with this is it would be more tricky to create these samples in the first place because I can't just use a sample of a chord being played but would have to sample each reed in the chord individually (or find a sample set where this had been done).
Logged

Martin J

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 902
  • Poole, Dorset
Re: MIDI - Sample sets and chords
« Reply #4 on: January 31, 2011, 05:22:49 PM »

You are well ahead of me Jim.  One last thought which may be useless.  Can you use a sample from the lowest treble button available for the note you want and then pitch shift it.
Logged
Castagnari, Weltmeister, Giustozzi, Streb, too many Hohners.  No Strings Attached ceilidh band

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: MIDI - Sample sets and chords
« Reply #5 on: January 31, 2011, 07:59:45 PM »

Can you use a sample from the lowest treble button available for the note you want and then pitch shift it.

Yes, I hadn't thought of sampling from the treble end for the chords. I will probably experiment with that - unless I manage to find a ready made sample set first...
Logged

Alan Morley

  • Alan Morley
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1190
    • Soundcloud
Re: MIDI - Sample sets and chords
« Reply #6 on: January 31, 2011, 08:32:33 PM »

« Last Edit: January 31, 2011, 08:45:57 PM by Almo2504 »
Logged
ISIS Melodeon, Hohner Erica,  Fender Strat Plus, Takamine, Hofner Violin Bass, Hohner CX12 Harmonica, etc..

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: MIDI - Sample sets and chords
« Reply #7 on: January 31, 2011, 09:05:55 PM »

Those are great Alan. Thanks.
I've just looked at the first two so far - the "diato" one seems to be very good quality.

They have sampled the chords as a single sample so only one MIDI note is required to trigger the chord.
Logged

Alan Morley

  • Alan Morley
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1190
    • Soundcloud
Re: MIDI - Sample sets and chords
« Reply #8 on: January 31, 2011, 09:35:03 PM »

Those are great Alan. Thanks.
I've just looked at the first two so far - the "diato" one seems to be very good quality.

They have sampled the chords as a single sample so only one MIDI note is required to trigger the chord.


Excellent Jim - I hoped they'd be what you were looking for.....I stopped using SF2 when I got the Acoustica Mixcraft 5 which has loads of midi and wave files built in.

Have fun..

Alan
Logged
ISIS Melodeon, Hohner Erica,  Fender Strat Plus, Takamine, Hofner Violin Bass, Hohner CX12 Harmonica, etc..

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: MIDI - Sample sets and chords
« Reply #9 on: February 04, 2011, 12:09:49 PM »

I would always have a midi melodeon which sends 3 notes to the sound module, because you have major and minor chords in a layout which have to be correct for the tuning you choose to be in.  Changing tunings is one of the major advantages of any MIDI instrument - and if you had a single note E triggering the Em chord on a D/G layout - when you switched it to E/A (a very useful tuning) The E needs to be a E major chord.  I suppose this issue would not occur if the chords recorded were only 2-note ones with thirds removed.

On my sample banks I have recorded individual left hand reeds by taping the others off and get the Streb to send 3 or 2 notes (depending on the thirds button position) to the controller - it then recombines them in any order and they sound like convincing melodeon chords again.  You could theoretically do the same for bass buttons and the treble keyboard, but I have never made tremolo work properly by combining single reed samples electronically.  I think the physical coupling of the reeds is necessary for a proper sound.

I do have sample banks of individual notes which are simple long wav files for each note without looping - and Kontakt 3 instrument banks which map these files to the notes.  Collectively they are quite a big folder of files and I don't have them online, but if you could make use of them then you're welcome to them, pm me if you do to work out how to do it.

Cheers

Squeezy
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: MIDI - Sample sets and chords
« Reply #10 on: February 07, 2011, 12:25:34 PM »

I would always have a midi melodeon which sends 3 notes to the sound module ...

Thanks for the advice. I've already found a limitiation of the "diato" sample set that Alan linked to above is that the chords are only available in a G/C configuration.

I've sent you a pm!
Logged

oggiesnr

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 995
  • Dino BPII, Alfred Arnold Bandoneon, Loffet G/C
Re: MIDI - Sample sets and chords
« Reply #11 on: February 07, 2011, 05:28:53 PM »

This is probably a silly question but how do you get the aritculation of the note from the sample.  EastWest in their huge orchestral sample banks have umpteen articulations and note lengths for each note of the instrument.  Can using a long WAV file and copping it to length imitate the different effects and if so how?

Curiously

Steve
Logged

Jim

  • Good talker
  • **
  • Offline Offline
  • Posts: 56
Re: MIDI - Sample sets and chords
« Reply #12 on: February 07, 2011, 05:58:21 PM »

This is probably a silly question but how do you get the aritculation of the note from the sample.  EastWest in their huge orchestral sample banks have umpteen articulations and note lengths for each note of the instrument.  Can using a long WAV file and copping it to length imitate the different effects and if so how?

I think different articulations such as you describe are less critical for melodeon because the timbre of the note doesn't change as significantly across the expressive range as it does on many other instruments. The midi signal can carry "expression" information which is used to vary the volume of the note according to bellows pressure and this alone does a pretty good job.

Similarly in a real melodeon the sounding of the reed is truncated abruptly by a valve or pallet shutting and so cutting off the sample sounds pretty realistic. In both cases there will be nuances that are lost but the "one sample per note" method will produce a decent sounding instrument.


Hopefully Squeezy will be along later with some better insight. I'm just starting out with this stuff.
Logged

squeezy

  • Quick starter (now lagging behind)
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1317
  • Hohner Cornelia (mixte D/G/o&s)
    • www.johnspiers.co.uk
Re: MIDI - Sample sets and chords
« Reply #13 on: February 09, 2011, 08:14:52 PM »

Hello - I'd forgotten that I'd posted in here and just came back to see what had happened.  Thanks for the PMs - I'll get on with those later, although unfortunately on my broadband connection I fear uploading whole instrument sample sets could see my computer staying on for 48-72 hours!

The articulation is a thing I have had several very long and involved attempts to solve!  None so far have been very successful I'm afraid.  Fortunately as has been said - the melodeon has much less variation in the quality of the notes played than most other instruments so I kind of get away with it.

Firstly - at low volumes where the reed is only just speaking, a melodeon note will generally start with much less attack and the reeds in the voicing kick in at different times.  However at moderate to high bellows pressure, the note starts almost instantaneously.  A good virtual instrument would try and replicate it - but if you can only have one it is much better to use samples of reeds that speak quickly.

Secondly - as you increase the pressure on the reeds to very hard, you can hear in most boxes a kind of zinging effect.  The note has more upper frequencies in it at high pressures and sounds brighter.  At very high pressures which some use - the notes bend a little too.

I first tried solving this by recording all the notes at 3 pressures, low, medium and high.  The problem of the melodeon is that you can swell a note to get louder or quieter and this is where the problem starts.  In Kontakt 3 which is my software sampler of choice - you can make the samples crossfade in to eachother.  However - it is impossible to get any tremolo to match up because the swell has to work any time during the note - what you hear is a strange beating as the samples fade in to eachother.

I also had a stab at creating the zing by using a mild EQ that was automated to the bellows pressure.  This was less problematic, but it still sounded artificial even when the EQ was only boosting the treble frequencies a little bit.

I did, however solve the problem of the ends of notes caused by a pallet shutting which made a big difference to the sound of the samples.  I cut the very tail of every note out painstakingly and those samples were triggered by the software on the note finishing.  If you turn these note-tail samples up they sound quite charming actually - like a music box and a soft clunk.  The noise is the reed still vibrating in the melodeon and lasts much longer on lower notes.  This is a solution which is specific to Kontakt 3 though.

I hope that offers some insight into just how geeky I can get!
Logged
Squeezy

Sometimes wrong, sometimes right ... but always certain!
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal