Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed size  (Read 1599 times)

0 Members and 1 Guest are viewing this topic.

syale

  • The Terrier
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 711
  • When will this MADness stop?
Reed size
« on: August 17, 2013, 09:49:29 PM »

Are there formulas for calculating reed size with respect to thickness, width, length and type of material used? It is a passing interest I have so I Binged and Googled but may have entered the wrong phrases and didn't come up with anything worth reading (or is that reeding!). Manufacturers of reeds must surely have a formula or is it trial and error that is passed down?
Logged
HA114 C/G/A/D, 2915 G/C. Liliput, Club IIB C/F Dino Baffetti Modell 22 B Twitter: @syale

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Reed size
« Reply #1 on: August 17, 2013, 09:57:13 PM »

Manufacturers of reeds must surely have a formula or is it trial and error that is passed down?

I bet they do, but I also bet it's under lock and key

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Reed size
« Reply #2 on: August 17, 2013, 10:01:22 PM »

There are generic formulae - you might need a degree in Mech Eng to understand them - and there are members who have some knowledge. It has been discussed before, here or on CNET.

However, I think that the variables that you will need to consider would reduce most calculations to an approximation.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed size
« Reply #3 on: August 19, 2013, 07:40:14 AM »

Yes! I'll try and root it out this evening if you want. But be warned, it is only an approximation and you need to know the young's modulus and density of your material. And it doesn't include width.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Reed size
« Reply #4 on: August 19, 2013, 08:42:29 AM »

… and they don't call it the "stress" tensor without cause. Have fun young engineer!
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed size
« Reply #5 on: August 19, 2013, 08:45:00 AM »

I suggest you also measure reeds. It might me instructive to compare theory with what reed makers have found to work.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal