Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reed blocks  (Read 1627 times)

0 Members and 1 Guest are viewing this topic.

derekh

  • Member
  • *
  • Offline Offline
  • Posts: 9
reed blocks
« on: April 02, 2011, 05:49:35 PM »

im looking for d/g reed blocks for an old honher  any advice welcome or would d/g reeds fit into c/c# reed blocks without to much alteration
Logged

george garside

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5401
Re: reed blocks
« Reply #1 on: April 02, 2011, 06:50:44 PM »

can't see any reason why they shouldn't -  provided you don't tell the reed blocks they won't mind!
Logged
author of DG tutor book "DG Melodeon a Crash Course for Beginners".

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed blocks
« Reply #2 on: April 02, 2011, 07:06:10 PM »

It depends a bit on the age of the box, and the age of the blocks.   They are substantially the same but with a few small differences which could give you a little work.

1 Older Hohners have the gasket on the base of the reedblock, newer blocks don't have a gasket so you would have to fit a one.
2 Hohner have used several different designs of retaining clamp.  The older type can be used with newer blocks but you may need to adjust the clamp to get a secure fit.  Older ones have a screw bent into the shape of in inverted L which holds on the highest part of the block.  Newer ones have a metal plate and screw which clamp lower down.  They can be interchanged if you are prepared to make a few minor alterations.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

derekh

  • Member
  • *
  • Offline Offline
  • Posts: 9
Re: reed blocks
« Reply #3 on: April 02, 2011, 08:18:56 PM »

they are the original reed blocks so i shouldnt have to much trouble then are caganoni reeds ok?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed blocks
« Reply #4 on: April 02, 2011, 08:47:32 PM »

It can be done - I play a Hohner with Cagnoni reeds.  Most Italian reeds are longer for the same note compared with Hohner reeds, so you will probably have to carve out some wood from the top edge of the reed chamber to allow clearance for the reed tongue and valve.  You may not need to do it for every reed.  But check every reed for clearance, and enlarge as necessary.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal