Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: reed blocks  (Read 1166 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
reed blocks
« on: May 23, 2011, 02:50:31 PM »

Here is an interesting bit of info I thought I would pass on.

I just spoke to the tech at Hohner USA who informed me that all of the reeds blocks for Ericas and Pokerworks are the same size regardless of key.  I have always been under the impression that the blocks for the lower keys like G/C had to be a little larger to accommodate the larger reeds.   ???
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: reed blocks
« Reply #1 on: May 23, 2011, 02:56:06 PM »

I have always been under the impression that the blocks for the lower keys like G/C had to be a little larger to accommodate the larger reeds.   ???

Many people assume that to be the case, I used to until I started doing reed work.  The higher pitched reeds eg D/G often have a thin strip of wooded under the lower end of the reed plates to take up some of the extra space.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal