Thanks for your info Rob2Hook. I have the origional Tandy PZM User Guide in front of me at the moment and it's interesting to note that the specs. rate the Frequency Response as 20 -18,000Hz, wider than for the 'Crown Sound Grabber 2'.
One thing that these notes suggest, and that was widely accepted practice with these Mic's, especially in recording and studio applictions was to mount them on a larger plate. The way we used them (still do in my case) was to take the mic unit off it's steel plate and mount it using the origional screws on to a perspex plate shaped like, and about the same size as a shoebox lid. This was gaffered on to the offending accordion (In my case a Hohner Corona 11-GCF). Some piano accordionists used two PZMs on the same plate as they had a larger area to pick up from.
We also ran them with 9volt batteries, which increased the signal significantly.
This worked well in my thankfully brief faze of playing in a rock outfit with a REALLY loud bass, drums and electric guitar. Like I mean loud!!!!! I still got the headroom I needed, and had the others complaining that the Box was too loud...poor little darlings....heh heh heh.
But it was a fun band..we did this tune called 'Thunder Road' Duetting Electric guitar with my Acadian D. Quelle Horeur...it was great, but it sure wasn't Cajun.
I wonder if the 'Crown Sound Grabber 2' would take to the same user customizing, or if it has had this capability designed out of it?