Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How hot should the wax get?  (Read 1496 times)

0 Members and 1 Guest are viewing this topic.

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
How hot should the wax get?
« on: January 08, 2012, 03:20:21 AM »

I've looked for information about how hot to get your wax when waxing reeds and haven't found anything. Should it get smoking hot then cool just a bit, or just warm enough that it's able to flow, or somewhere in between?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: How hot should the wax get?
« Reply #1 on: January 08, 2012, 04:54:16 AM »

You don't want it to just flow, you want it to flow smoothly.  Not sure what temp I'm at, but I use the same double boiler I use for hot hide glue, which is about 145, and set it just barely warmer. There is a point where it will flow, but cools before smoothing itself out.  When the right temp, it flows fast, and dries smooth and even. I've never noticed mine smoking. 

That probably doesn't help much and maybe someone else can give more to go on, but I just experimented with different setting until I found one that worked well and marked it.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: How hot should the wax get?
« Reply #2 on: January 08, 2012, 07:36:10 AM »

I've looked for information about how hot to get your wax when waxing reeds and haven't found anything. Should it get smoking hot then cool just a bit, or just warm enough that it's able to flow, or somewhere in between?
I've recently started using a variable temperature soldering iron for waxing reeds. It has a digital temperature display and I have achieved good results using a temperature setting of 180°C. I don't know how accurate the temperature display is, but perhaps it is OK to plus or minus 10°C. Using the soldering iron at this setting seems to allow the wax to flow freely, but it doesn't burn the wax or cause it to turn dark brown.

Because of the small surface area of heating at any one time there is probably a lot of heat loss at the soldering iron bit, and I suspect that if I had a pot of wax at 180°C it would probably be too hot. Whatever method you use, if your wax starts smoking and turning dark, it is too hot.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How hot should the wax get?
« Reply #3 on: January 08, 2012, 07:46:48 AM »

In Charlie Marshall's Youtube video on waxing he says to turn off the heat as soon as the first hint of smoke appears. I do this, and it seems to work - as soon as the wax feels as if it's becoming too stiff I warm it up slightly and on we go. You certainly don't want it so hot that it darkens.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal