Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: bronze reeds, single row  (Read 2619 times)

0 Members and 1 Guest are viewing this topic.

butterfingers

  • Good talker
  • **
  • Offline Offline
  • Posts: 66
bronze reeds, single row
« on: September 18, 2008, 01:14:25 AM »

   In the last year I've bought a number of old single row pre-1940 boxes. Most of them have bronze reeds and they are amazingly in tune for their age. Unfortunately most of them have bellows that are glued directly to the body of the box [unlike Hohners that have an independent frame for the bellows], and at the point of contact there are usually tears. Also, in a couple of the boxes, reeds have broken off, how I don't know [how can you break an accordion reed just by playing?]...so, is there anyone out there who knows where to find bronze reeds for replacement [to match the tonality], also how could one replace the torn fabric of the bellows onto the wooden part of the instrument [there's not much leeway on the wooden part, about a 1/4 inch, before nails and brass take over]. I would appreciate hearing from anyone who's taken the effort to restore one of these old boxes.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: bronze reeds, single row
« Reply #1 on: September 18, 2008, 08:34:12 AM »

I've restore one or two of these, usually for people for whom the instrument is of sentimental value.  The cost of restoration usually far exceeds any financial value the instrument would have. 

Typical problems are as you have outlined ie broken reeds and disintegrating bellows.  The brass reeds break because the material work hardens with use, and then cracks.  Bellows likewise tend to fail because they are made of material that is not very durable.
 
The only way I've found to replace broken reeds is to cannibalise the reeds from the instruments in the poorest condition.  It is possible, but not easy,  to remove individual reed tongues from the plate and rivet them in to replace broken ones.  If bellows are splitting then the only long term solution is to fit a complete new set of bellows, though it is sometimes possible to replace damaged parts.  Bookbinder buckram is a good material for some bellows repairs.

All bellows are glued on to a wooden frame, its just that on the ones you describe the wooden frame is much wider than on modern boxes.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal