Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Bellow corners  (Read 1885 times)

0 Members and 1 Guest are viewing this topic.

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Bellow corners
« on: February 06, 2012, 12:03:55 PM »

Just a quick question, does anyone know the normal type of bellow corners used for melodeons? (mostly for Saltarelle Connemara style boxes).
Using the follow identification blahblah:
60AP
60CH
52AP
52CH
44AP
40
35ME
35TO
35AG
http://www.galassi-bellows.it/img/mat_a_tipo_angoli.jpg

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Bellow corners
« Reply #1 on: February 07, 2012, 04:19:07 PM »

Matt,

I wonder if anyone is sure of what your question is?  I think each manufacturer and model uses whatever radius suits the style of the casing.  Just offered up the template and my Nik is a 35 and the larger Clubs are 40, but I didn't understand the different types.  I assume that larger boxes use larger sizes.

Perhaps Theo or Rees can confirm as they are both experienced at ordering replacement bellows.

Rob.

P.S. print the order form and there are templates for each size.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bellow corners
« Reply #2 on: February 07, 2012, 05:07:45 PM »



Perhaps Theo or Rees can confirm as they are both experienced at ordering replacement bellows.

Rob.

P.S. print the order form and there are templates for each size.

That is what I do.  For the larger sizes eg 60, 52 the number is the radius of the corner curve.   For the tighter corners there is some inscrutable Italian naming system that I have not been able to work out!

Second tip:  for measuring the length and width don't try to measure the bellows because they are slightly flexible, and the end frames may get in the way.  Instead take one end off and measure the length and width of the case across the opening where the bellows fit.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

mattsmee

  • Good talker
  • **
  • Offline Offline
  • Posts: 54
    • www.mattsmee.co.uk
Re: Bellow corners
« Reply #3 on: February 07, 2012, 11:59:06 PM »

Sorry, it is just because I am going to be ordering some bellows from these guys (as they have good prices) and they said the 40AP that I put on my order was normally for Cajun bellows and that a 35AG would be better. But I have no idea what suits what
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal