Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Odd reedplates  (Read 3688 times)

0 Members and 1 Guest are viewing this topic.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Odd reedplates
« on: February 21, 2012, 01:10:04 AM »

These reedplates have unusual (for me anyway) relieved slot walls.
Is this a common feature?  Anyone know how this would affect vibration/sound ?

Thanks

Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Odd reedplates
« Reply #1 on: February 21, 2012, 01:29:42 AM »

Interesting and not sure! It will increase airflow on the short stroke, as you're providing a greater area. What affect that will have on the sound I have absolutely no idea, especially not at 0130!
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Odd reedplates
« Reply #2 on: February 21, 2012, 11:08:59 AM »

Interesting indeed. I've not seen reed plates like that before.
The extra slots appear to be sawn. They don't occur on all the plates. Is it possible that they are overzealous saw marks, and that this is an example (I hesitate to say poor workmanship) of the slots being made by drilling, sawing and filing, rather than by milling or stamping?
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Odd reedplates
« Reply #3 on: February 21, 2012, 03:52:27 PM »

They do appear to be saw marks from a slitting saw as a secondary operation after the slot has been cut and may be an approximation to the tapered slots in concertina reed shoes.
Logged
aka malodeon

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Odd reedplates
« Reply #4 on: February 21, 2012, 03:54:14 PM »

for more information see this at concertina net
Logged
aka malodeon

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Odd reedplates
« Reply #5 on: February 21, 2012, 06:29:42 PM »

The discussion on concertina net seems to be concerned with the taper on the reed shoe from reed tip to rivet end. What the pics Tirpous is showing indicate is a difference from one face of the reed plate to the other face. I've never seen this on concertina reeds or accordion reeds, but it's quite common on brass harmonium reeds, although I've no idea why?
Logged

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Odd reedplates
« Reply #6 on: February 21, 2012, 06:59:41 PM »

Blast, I was in a hurry at work and thought that I have found the right thread. The link to Wim Wakker and his discussion on reeds is well worth reading for an introduction from a man who has studdied this as an academic.
The thread I was looking for has information on reed taper behind the reed, how it was achieved by Crabb and the effect it has at the sides of the reed and at the tip. I will look again.
Logged
aka malodeon

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Odd reedplates
« Reply #7 on: February 21, 2012, 07:07:03 PM »

Interesting indeed. I've not seen reed plates like that before.
The extra slots appear to be sawn. They don't occur on all the plates. Is it possible that they are overzealous saw marks, and that this is an example (I hesitate to say poor workmanship) of the slots being made by drilling, sawing and filing, rather than by milling or stamping?

Given the inconsistencies in the execution of the workmanship, I'd guess this was done by an amateur wanting to experiment with reed chamber design. The only way to find out how they sound is to put them in an instrument and try them. Let us know what changes you notice in the sound and response of the reeds. I'm intrigued.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Odd reedplates
« Reply #8 on: February 21, 2012, 07:08:35 PM »

A couple of years ago there was a Dutch accordion shop/repairer who was modifying the highest reedplates in a related way by milling out a circular opening at the back of the plate behind the reed tip.  IIRC they were marketed as "high output piccolo reeds" and he had experimental results supporting claims that they produced a significant higher volume than in modified reeds.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Odd reedplates
« Reply #9 on: February 22, 2012, 12:53:07 AM »

The discussion on concertina net seems to be concerned with the taper on the reed shoe from reed tip to rivet end. What the pics Tirpous is showing indicate is a difference from one face of the reed plate to the other face. I've never seen this on concertina reeds or accordion reeds, but it's quite common on brass harmonium reeds, although I've no idea why?

On the contrary, the current c.net discussion as suggested my another Malcolm seems imho very relevent to this question.
Did you read the entire thread, Tom?
« Last Edit: February 22, 2012, 12:56:16 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Odd reedplates
« Reply #10 on: February 22, 2012, 01:41:21 AM »

If tapering the inner walls of the reed plate do indeed aid the 'unloading' of pressure on the downward travel, then perhaps it's an attempt to alter the 'timing' of that event, similar to 'tuning' the intake/exhaust cycle of a two-stroke combustion engine....... ???
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Odd reedplates
« Reply #11 on: February 22, 2012, 02:48:01 AM »

These reedplates have unusual (for me anyway) relieved slot walls.
Is this a common feature?  Anyone know how this would affect vibration/sound ?

Thanks



What type of accordion did you take these out of? Age, maker, country of origin etc.

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Odd reedplates
« Reply #12 on: February 22, 2012, 05:42:19 AM »

Reeds are from a German 2-row Globe Gold Medal, from the 1920s or 1930s maybe?

This accordion was mentioned in:
http://forum.melodeon.net/index.php/topic,5830.0.html
http://forum.melodeon.net/index.php/topic,5707.0.html

Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal