Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Air button spring steel strip  (Read 2598 times)

0 Members and 1 Guest are viewing this topic.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Air button spring steel strip
« on: February 19, 2012, 05:34:20 PM »

Any ideas about where to get a little strip of spring steel suitable for an air button?

pete /acorn

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 930
  • .Cast Trilly
    • Acorn Instruments
Re: Air button spring steel strip
« Reply #1 on: February 19, 2012, 06:28:06 PM »

Hi
Try a clock repairer,the should have off cut.dependant which melodeon repairing,on Saltarelle I have fixed to bass plate with a leather rivet.

Pete
Logged
Acorn Instruments are specialist retailers of Castagnari Instruments,and have an extensive stock of new instruments on the shelf for prompt delivery in standard layouts however these can easily be changed to customers special requirements,we have over 600 reeds in stock
 We also have the largest stock in the UK of  pre loved melodons all fully serviced,and with 12 months warranty
UK and international customers catered for
www.acorninstruments.co.uk

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Air button spring steel strip
« Reply #2 on: February 19, 2012, 09:23:46 PM »

I'd second the idea of a leather hinge.  On a friend's Saltarelle recently we found that the "spring" strip had taken on a set and was permanently holding the air valve open - this cannot happen with a leather hinge.

Rob.
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Air button spring steel strip
« Reply #3 on: February 20, 2012, 08:47:30 PM »

Find an old wind up alarm clock. The spring on the inside might work. Be careful when you disassemble the spring casing though.  The springs are quite long and have a mind of their own when released.
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Air button spring steel strip
« Reply #4 on: March 09, 2012, 12:45:38 AM »

Thought I ought to come back and say something.

I replaced the bass end-plate on my little Baffetti, and (as per suggestions) I've used a piece of leather for the air-button hinge. It's working very well at the moment so I'll just keep an eye on it to see how it gets on.

Thanks  (:)

pikey

  • Addicted to squeezeboxes since 1975
  • Thread mod
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3364
  • If it moves, I'll squeeze it....
Re: Air button spring steel strip
« Reply #5 on: March 09, 2012, 12:56:10 PM »

I used a thick feeler guage on my Black Pearl III to replace the original strip which snapped - it works like a dream!!
Logged
Still squeezing after all these years.
Mostly on hohners , with a couple of Dinos and a smattering of anglos - and now a Jeffries duet

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Air button spring steel strip
« Reply #6 on: March 09, 2012, 02:52:09 PM »

I used a thick feeler guage on my Black Pearl III to replace the original strip which snapped - it works like a dream!!

Brilliant!!  A handy source of spring steel in multiple "strengths"
Logged

Simon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 449
  • Serenellini Selli C/F and Gold98 G/C
Re: Air button spring steel strip
« Reply #7 on: March 09, 2012, 03:51:20 PM »

I've used street sweeper bristles for mbiras; they could work for air buttons as well. Plenty lying around on the street if you look for them.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal