Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Zinc reedplates  (Read 3725 times)

0 Members and 1 Guest are viewing this topic.

OldDog

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
Zinc reedplates
« on: April 13, 2012, 07:22:43 PM »

Zinc reedplates tend to develop a spotty, thick, white coating on them after so many years. Does anybody have a way of removing this deposit? A brass bristle brush works after a fashion, but isn't very good for getting into the reed slots in the plate. I don't want to try wiping it down with vinegar or another chemical if I don't know what might happen when I do.

Thanks for your help.

Paul N.
Tonawanda, NY
Logged
Over the hill? What hill?! I didn't see no hill!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Zinc reedplates
« Reply #1 on: April 13, 2012, 08:21:14 PM »

Zinc plates don't always go powdery like that,  it must depend on the conditions it is stored in.  I imagine high humidity is a big factor.

I've just invested in an ultrasonic bath which makes a lovely job of cleaning off all the loose white powder, as well as powdery rust, and is great for getting rid of all the muck that can accumulate in the gaps at the side of the reed tongue.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Zinc reedplates
« Reply #2 on: April 14, 2012, 12:03:21 PM »

Zinc plates don't always go powdery like that,  it must depend on the conditions it is stored in.  I imagine high humidity is a big factor.

I've just invested in an ultrasonic bath which makes a lovely job of cleaning off all the loose white powder, as well as powdery rust, and is great for getting rid of all the muck that can accumulate in the gaps at the side of the reed tongue.

Theo

Which bath did you get?

OldDog

  • Good talker
  • **
  • Offline Offline
  • Posts: 89
Re: Zinc reedplates
« Reply #3 on: April 14, 2012, 08:17:02 PM »

Theo,

What do you use in the ultrasonic bath? Just water, water and vinegar, water and dish washing detergent, something else? I have an ultrasonic that I've been using to clean my harmonica and other small objects. I use water and vinegar on those things. The harmonica has a plastic comb. I'm not dumb enough to put a wooden comb in there. I guess I never thought of using it for the reedplates.

Regards,
Paul N.
Logged
Over the hill? What hill?! I didn't see no hill!

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Zinc reedplates
« Reply #4 on: April 14, 2012, 08:38:32 PM »

Me neither..........

I have a grotty old Scholer Concertina with aluminium & Brass unified reedplates (one for each row of each end) like a harmonica and they`re a bit wheezy when played so a dip in the ultrasonic looks like a good idea - I usually use washing up liquid for other stuff as it shifts oily deposits. likewise, suggestions on what to use on reedplates would be welcome.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Zinc reedplates
« Reply #5 on: April 14, 2012, 10:21:50 PM »

I've used water and vinegar in my ultrasonic with excellent results.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Zinc reedplates
« Reply #6 on: April 14, 2012, 10:27:05 PM »

I've used water and vinegar in my ultrasonic with excellent results.

What bath do you use?

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Zinc reedplates
« Reply #7 on: April 14, 2012, 10:41:14 PM »

I've detailed my ultrasonic cleaning regimen here before...

http://forum.melodeon.net/index.php/topic,8955.msg111463.html#msg111463

Vinegar is easily the best solvent I've tried. I don't recall the exact model of cleaner I have but it was about £25, reduced from about £40, at Maplin. Martyn White can testify to how clean I was able to get things using it but some elbow grease was required; to get really good results from an ultrasonic bath alone I'd imagine that you'd have to invest in one of the proper industrial models starting at a couple of hundred pounds.

*gone*My days working on boxes are behind me now and I'm not going to have much use for it so my ultrasonic cleaner is up for grabs for £10 + postage if anyone's interested... *gone*
« Last Edit: April 14, 2012, 11:53:01 PM by Andy Simpson »
Logged

an bosca ceoil

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 347
Re: Zinc reedplates
« Reply #8 on: April 14, 2012, 11:45:16 PM »

Sent you a P.M. (and just reminded myself about some buckram ;))
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Zinc reedplates
« Reply #9 on: April 15, 2012, 10:14:38 AM »


Which bath did you get?

I big one - I want to be able toe easily get a whole set of reeds cleaned in one go.  It was secondhand off fleabay.   It has a heater which is assume is important for removing wax in particular.
Theo,

What do you use in the ultrasonic bath?

I'm wary of the long-term effects of cleaning so I've opted for a special cleaning solution designed for sensitive metals.  Ultrasonic cleaning of metals like aluminium, zinc, etc can produce surface erosion so you have to be careful.  I'm not yet completely clear on the parameters, but with zinc the length of time in the cleaning process is important, too long and you can actually produce a powdery surface on zinc.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Zinc reedplates
« Reply #10 on: April 15, 2012, 11:02:52 AM »

I've used water and vinegar in my ultrasonic with excellent results.

What bath do you use?

I use a small one - James Ultrasonic 7000.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal