Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: waxing reeds  (Read 3654 times)

0 Members and 1 Guest are viewing this topic.

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
waxing reeds
« on: September 30, 2008, 01:14:55 PM »

I ordered myself one of those odd looking reed waxing "spoons" but I really don't know the technique for using one.  I also understand that many use a soldering iron and a stick of wax instead of the spoon.  I would be grateful for any tips on reed waxing technique that anyone has to offer.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: waxing reeds
« Reply #1 on: September 30, 2008, 01:58:19 PM »

If using a wax spatula or spoon I think you need a thermostatic  wax pot to keep the melted wax in.  Excellent if you are waxing reeds all day.  I use a low temp soldering iron and a stick of wax.  It is rather like welding as you run a bead ok melted wax along all the joints. Like any practical skill it takes a little trial and error to be able to do a neat job.  The biggest hazard with either method is getting wax in the wrong place, ie on the reed tongue or valve. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: waxing reeds
« Reply #2 on: September 30, 2008, 11:18:47 PM »

I've only had one go at waxing reeds so far, and I melted the wax over water in a single egg poacher on the stove which worked quite well for me. Once the wax had melted I removed the pan from the heat and worked for a few minutes before heating it through again. The best bit of advice I was given was to practice making straight lines on a bit of scrap wood to get used to making the wax flow at an even rate. Tilt the work piece slightly and work smoothly from top to bottom, you'll soon get the idea. I discarded the wax I used to practice with because I wasn't sure if the wood would (sic) soak up the oil from the mixture and spoil the rest if I scraped it off and used it again.

When you get around to actually waxing reeds in you need to have the courage of your convictions and work fairly quickly (but not at too great a speed - don't panic!). Keep returning the tool to the molten wax and allow it to heat through before starting again so that the wax doesn't set on the spoon too readily.

Pete.
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: waxing reeds
« Reply #3 on: September 30, 2008, 11:36:51 PM »

I assume you hold the spoon curved side up and guide the flow of wax with the tip.  Does anyone use the little tacks to hold the reeds inplace?  Are the tacks or nails used to hold the reeds in place before waxing?  It seems like they would be in the way.
Logged

squeezebox63

  • Member
  • *
  • Offline Offline
  • Posts: 42
Re: waxing reeds
« Reply #4 on: October 01, 2008, 03:49:53 PM »

I use a fine tip soldering iron with a adjustable rheostat. to control the temperature.
You don't want to get the wax to hot, It gets very runny if to hot and hard to control. also if to hot it will darken. {as in burnt}
Logged

HallelujahAl

  • Guest
Re: waxing reeds
« Reply #5 on: October 01, 2008, 08:13:38 PM »

Last time I did this I used an electric thermostatically controlled baby's milk bottle warmer to keep the wax container warm (btw I got the soap sized bar of wax from Charlie Marshall at CGM musical services). This kept the wax at the perfect temp for me to work - not too hot, not too cool. I got the warmer for £1.00 at a local car boot sale -an expense I've not lived to regret!

I also use the same pot for other little jobs in and around my workshop/garage, i.e.

1. Keeping my animal hide glue warm when I'm undertaking daft things like making up concertina bellows (I've made 5 sets of 'tina bellows to date for friends and fellow travellers along the free-reed highway)http://www.concertina.net/forums/index.php?act=attach&type=post&id=3848
2. Most importantly  **Keeping my coffee warm** :)
« Last Edit: October 01, 2008, 08:24:44 PM by HallelujahAl »
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal