Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Supplier for Bass End straps with velcro  (Read 6735 times)

0 Members and 1 Guest are viewing this topic.

Andrew Wigglesworth

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1101
  • 07
    • My website
Re: Supplier for Bass End straps with velcro
« Reply #20 on: April 13, 2012, 12:41:07 AM »

I have one word for all of you.

...... magnets!

 ;D ;D ;D ;D

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Supplier for Bass End straps with velcro
« Reply #21 on: April 13, 2012, 02:51:12 PM »

I have one word for all of you.

...... magnets!

 ;D ;D ;D ;D

Yes indeed, but not for the bass end strap... ;-)

Ian
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

OwenG

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 297
Re: Supplier for Bass End straps with velcro
« Reply #22 on: April 13, 2012, 03:09:24 PM »

I have one word for all of you.

...... magnets!

 ;D ;D ;D ;D

Yes indeed, but not for the bass end strap... ;-)

Ian

Unless you attached one magnet to the bass end and the other to a strap round your wrist.  ;)
« Last Edit: April 19, 2012, 01:46:25 PM by OwenG »
Logged

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Supplier for Bass End straps with velcro
« Reply #23 on: April 19, 2012, 01:39:28 PM »

Thanks for this thread Brian. I had been thinking about doing the same for the past couple of weeks.

Do you have your CGM shopping list for the Pokerwork, or was it the same as the Liliput apart from strap length?

Andy
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

brianread

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1012
    • Slow and Steady Session in West Lancashire/Greater Manchester; Dance club in Rainford
Re: Supplier for Bass End straps with velcro
« Reply #24 on: April 20, 2012, 09:23:23 AM »

Thanks for this thread Brian. I had been thinking about doing the same for the past couple of weeks.

Do you have your CGM shopping list for the Pokerwork, or was it the same as the Liliput apart from strap length?

Andy

I haven't done the pokerwork yet, as it is still in bits. However I did correspond with Charlie about it, and this is what he said:

"the Pokerwork will require a 40 cms bass strap the bellow straps 020A are 11 cms hole centres and total length 14 cms"

Hope that helps, perhaps you could post the cat numbers if you do it?
Logged
Brian Read
D/G Oakwood (new model), D/G, C /F, Bb/Eb and E/A Liliputs,
A STREB!!,
2.5 D/G Self made Emmanuel Pariselle, D/G Pokerwork,
and Wolverton Advanced G/D Anglo Concertina and C/G  1937 Wheatstone.
all played "lefty" with mostly an extra air button, except the Concertinas which I play the conventional way round.

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Supplier for Bass End straps with velcro
« Reply #25 on: April 20, 2012, 10:24:25 AM »

The bellows straps I got for the pokerwork were the 023BC from Lester`s recommendation - they`re very alike if not the same as Morgane ones, perfect and easy to fit, I think they`re nicer than the 020A with a proper swivel & 3 screw mount for only £1 more

http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellow_Straps.html#31
Logged
Q: How do you cure MAD?
A: Buy more Boxes
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal