Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: How do I stop an air leak on a 4 stop one row chinese made box  (Read 1413 times)

0 Members and 1 Guest are viewing this topic.

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613

How do I stop an air leak on a 4 stop one row chinese made box.

Hi everyone, I have a chinese made 4 stop one row box, sounds ok however it does leak air under the pallets. The reed blocks are removable but there is no gasket. The reed blocks are sitting directly on the sound board and the sliders operating between the sound board and reed blocks. I can see that the reed blocks are not sitting flat, there is a small gap which loses air. I am reluctant to glue the reed blocks to the body in case of irreversible repairs. What are my options other than glue..?
Has anyone had any experience with this kind of problem, and how did you fix it.   
Any advice would be greatly appreciated.   
Thanks
Mus
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How do I stop an air leak on a 4 stop one row chinese made box
« Reply #1 on: April 19, 2014, 07:31:49 PM »

Depends how good your woodwork skills are. First of all, I'd determine whether it's the reedblock or the soundboard that's not straight; turn the block bottom up and lay a good steel straightedge along the surface and hold it up to a light. If you can see light anywhere between straightedge and block then the block is not flat and true. If the block is true and the soundboard is out of kilter you've got more of a problem, but let's suppose it's the blocks that need work. I solved this very problem on an old Hohner Club by gluing a thin shim of timber to the bottom of the blocks and then carefully truing it up on a belt sander. You need to go extremely carefully with this operation and test for truth with the straightedge very frequently. You should end up with a VERY thin veneer which is dead flat. Then it's a matter of opening out and cleaning up the airholes - most of which will be open anyway as the great majority of the shim will have been sanded away. Admittedly I've not tried this with the reeds in situ, but if you're extremely careful about dust removal it ought to be do-able. I'm sure someone more experienced than I will have suggestions for dealing with an out-of-true soundboard; as far as I can see it would be difficult to fit even a thin gasket because of the slides.

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 613
Re: How do I stop an air leak on a 4 stop one row chinese made box
« Reply #2 on: April 22, 2014, 08:40:43 PM »

Thank you for your help Graham.
 reed blocks are not strait for sure.I've straiten the blocks now and started making a new slots for the sliders -copying hohner 114  block- if all goes well I'll be able to glue them on the reed block and hope fully new slots would work as a gasket too.this way I am hoping sliders will work free in their slot, soft and flexible wood I used to make the slots would work as a gasket and no need to glue the the blocks on the body it self. It's amazing how much model making stuff can be used for repairing a box   @ Hobby craft  ;D.
cheers...Mus 
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: How do I stop an air leak on a 4 stop one row chinese made box
« Reply #3 on: April 24, 2014, 07:14:27 AM »

If the warping is in the blocks, and it is not severe, gluing a couple of sheets of 80 grit sandpaper to a sheet of thick glass ,and running the blocks on this works well. Draw lines on the bottom of the block with a pencil to see where it is hitting when you sand it.
 Hold the block in the middle and avoid rocking the block, run it back and forth length wise, and place the glass on a smooth flat surface while you work.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: How do I stop an air leak on a 4 stop one row chinese made box
« Reply #4 on: April 24, 2014, 07:18:04 AM »

That's the more craftsman-like (and safer!) version of my belt-sander method. Works well.
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal