Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: baldoni bartoli  (Read 9385 times)

0 Members and 1 Guest are viewing this topic.

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: baldoni bartoli
« Reply #20 on: December 06, 2008, 09:00:11 AM »

As the thing stands now, it has a tremendous amount of cut, very strong.
It probably sounds a lot like mine then, which is pretty hard to beat - if I was you, I'd leave it at that, or you'll maybe come up against the law of diminishing returns.

Quote
If I was going to put in an extra set of reeds, as myself and Lars had conversed about it, it would more than likely be a set of MM reeds (I think one of Charlie Harris' 8vs has LMMMMMMH setup?) I was considering taking the reeds out of an old globe I have here, but the reeds are different sizes (smaller than those in the Baldoni)... any recommendation as to what kind of reeds I should use if I decide to go the 8v path?
If you are going to do this, I think you'll find the German reeds in the Globe to be a waste of time - you'd best use handmade Italian ones, to compete with the rest of them. But a bigger issue may be getting hold of a replacement reedblock to mount them on.

But adding more reeds isn't necessarily a good thing for the sound - a very important consideration is how are you going to tune them ? Otherwise you could easily finish up taking away from it.

And I hear that Charlie may be thinking of selling his 8-voice, because it's physically hard to play and he recently had a (minor) heart attack.

Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: baldoni bartoli
« Reply #21 on: December 06, 2008, 12:22:58 PM »


Stephen; The 8v mentioned here with 6 middle sets of reeds is the 1½ row 15 button one - I've only ever seen pictures of it, perhaps you've tried it yourself. I don't know the setup of the Teahan one he also has.

A thing I also mentioned to Ryan was that I personally would be careful as to what reeds to put in. Best find someone as close as possible to the ones in there. And be VERY careful as to what setup to put in. The missing reedblock is not affected by the slider/register, so those reeds would be firing all the time.

My 6v used to be LLMMMM, but I must admit it do prefer it now when it's LMMMMH, like ryan's new box is.

Adding extra reeds also makes the box more "crowded" with reeds. A little space inside is not a bad thing, to give the sound some space to resonate.

(But had it been mine, I'd make a new reedblock - just to try it out)
Logged

hibbs3

  • Guest
Re: baldoni bartoli
« Reply #22 on: December 06, 2008, 06:37:56 PM »

As the thing is at the moment, it sounds very strong, full, and powerful. I'm going to construct a reedblock to fit, and order some reeds ,to see how the thing sounds. And if it takes away from the sound, then that reedblock will be taken away. As for the tuning, I'm going to have to check out the tuning on the other reeds before I decide what tune the new sets to.

 Which 8v is Charlie selling? I wonder if he might be interested in downsizing to a *currently* 6v box, that is amazingly compact and lightweight? ::)
Logged

Ted

  • Good talker
  • **
  • Offline Offline
  • Posts: 62
Re: baldoni bartoli
« Reply #23 on: December 22, 2008, 03:46:10 AM »

Now that we have Baldoni jacked up on a high pedestal, shouldn't we put Walters up there too since they were both made by the same people in NY city - at least that vintage was.
Logged

hibbs3

  • Guest
Re: baldoni bartoli
« Reply #24 on: December 22, 2008, 04:21:42 AM »

I would have to agree, as those Walters boxes sound just as good or even better than some Baldoni boxes...I'm not quite sure how those Superior boxes measured up though, I haven't heard much on them
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal