Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Muffled inner row  (Read 5026 times)

0 Members and 1 Guest are viewing this topic.

KLR

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 640
Re: Muffled inner row
« Reply #20 on: August 06, 2015, 05:10:12 PM »

The action on my Trichord is really low

That could be something to look at.  If the pallets don't lift far enough the sound may be attenuated.  Just a small increase in pallet lift can make a big difference.   You don't need to make a new keyboard top for this.  A combination of bending the levers so that the buttons sit higher, and/or lowering the felt stops below the buttons is all that is required.

There was a thread here where that was discussed, someone helpfully put up some pictures of key bending tools they'd made, so I might take a crack at that.  But, honestly, I wonder if it wouldn't be any more effort to build that new keyboard cover - and that was an idea I hadn't heard of before, so thought I'd mention it. 

The balance and sound on the Trichord's OK, too.  That Paolo really has the muffling going on though.  Also has a stepped keyboard, which I'm not so fond of, either.  I've a Corona IIIR and tried having its action lowered, it's still a chore to play, and the inner row is pretty dead, like Roger says.  But the inner row on all of my three rows is always at the least a bit shy, except for the Club Morino, where they made it a non-issue via over engineering - treble notes come out of 2 rows of pallets, bass notes out of the 3rd row underneath the keyboard. 
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal