Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 3 4 [5] 6 7   Go Down

Author Topic: Melodeon making with Emmanuel Pariselle  (Read 25789 times)

0 Members and 1 Guest are viewing this topic.

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Melodeon making with Emmanuel Pariselle
« Reply #80 on: June 06, 2014, 04:09:40 PM »

It seems like this arrangement would increase the volume of air that needs to be manipulated to actuate the reeds. Is there any noticeable difference in responsiveness?

I doubt it.
The change in pressure resulting from opening the pallet travels to the reed at the speed of sound, and it has to go (?) no more than 10cm - then the sound itself has an extra 10cm to travel back before it emerges from the end of the box, but that's all less than 1ms, which is small compared to the period of even a single cycle of a bass reed.

Executive summary: no difference, IMHO

Having the reeds buried at the end of a chimney might give them a particularly mellow tone, though.

As you say the chimney could filter some of the higher reed harmonics giving a more mellow tone -- but it could also peak before cutoff giving a nasty nasal tone, who knows...

If it also increases the total chamber volume behind the reed then it could also help with the reed starting. Bass reeds -- especially ones with weighted tips -- can often choke and start slowly if the pressure in the chamber rises very rapidly, a slower pressure build-up can help prevent this. Depending on the size of the hole under the pallet, a bigger chamber can help prevent bass reeds choking when played hard.

Presumably Emmanuel and all those who have made and worked on these boxes would have a reasonable idea Ian. Maybe those in the know will be best equipped to comment. All the Best mory
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon making with Emmanuel Pariselle
« Reply #81 on: June 06, 2014, 04:17:16 PM »

In practice the chimney on EPs basses seems to work well with a good response and tone.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

MartinW

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 202
Re: Melodeon making with Emmanuel Pariselle
« Reply #82 on: June 06, 2014, 07:13:12 PM »

I certainly think the basses on mine feel and sound very good.
Martin
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodeon making with Emmanuel Pariselle
« Reply #83 on: June 07, 2014, 11:18:22 PM »

Just wanted to say the Pariselle layout feels very intuitive to play.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Melodeon making with Emmanuel Pariselle
« Reply #84 on: June 08, 2014, 01:24:54 AM »

If there is a "layout" (I thought they were bespoke) and its intuitive to play? Could you please point us at it.
Logged
  _       _    _      _ 

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Melodeon making with Emmanuel Pariselle
« Reply #85 on: June 08, 2014, 08:15:38 AM »

OK, that's a fair point. It was his 'proposal'. When I can work out how to get the graphic file out of the email, I'll post it (for everyone to tear apart. (:)). I should qualify what I said and add 'to me'.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Melodeon making with Emmanuel Pariselle
« Reply #86 on: June 08, 2014, 09:41:15 AM »

via Roger ;)
Logged
  _       _    _      _ 

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon making with Emmanuel Pariselle
« Reply #87 on: June 08, 2014, 09:52:02 AM »

Good point Chris.  I will arrange to add it to the list if layouts we have here.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Melodeon making with Emmanuel Pariselle
« Reply #88 on: June 08, 2014, 09:56:09 AM »

If there is a "layout" (I thought they were bespoke) and its intuitive to play? Could you please point us at it.
There are two melodeons made on EP's previous courses which are up for sale on Theo's 'Box Place' website. There is a layout shown for each instrument. They all seem to be different!

See here and here.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Melodeon making with Emmanuel Pariselle
« Reply #89 on: June 08, 2014, 10:09:38 AM »

Emmanuel has a default layout, but course members are free to choose or design their own. On the Isleworth course in 2011, which included several people who post here regularly (e.g. Lester, Brian, Dunny and myself), almost every box had a different layout.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Melodeon making with Emmanuel Pariselle
« Reply #90 on: June 08, 2014, 02:40:55 PM »

This is a cut down of Emmanuel's PDF.

   Next to it is a completely blank grid!! ::)
Logged
  _       _    _      _ 

Graham Collicutt

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 107
Re: Melodeon making with Emmanuel Pariselle
« Reply #91 on: June 09, 2014, 07:25:24 AM »

I finished the grill on Saturday.
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Melodeon making with Emmanuel Pariselle
« Reply #92 on: June 09, 2014, 09:02:24 AM »

Beautiful.
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon making with Emmanuel Pariselle
« Reply #93 on: June 09, 2014, 01:18:17 PM »

It seems like this arrangement would increase the volume of air that needs to be manipulated to actuate the reeds. Is there any noticeable difference in responsiveness?

I doubt it.
The change in pressure resulting from opening the pallet travels to the reed at the speed of sound, and it has to go (?) no more than 10cm - then the sound itself has an extra 10cm to travel back before it emerges from the end of the box, but that's all less than 1ms, which is small compared to the period of even a single cycle of a bass reed.

Executive summary: no difference, IMHO

Having the reeds buried at the end of a chimney might give them a particularly mellow tone, though.

As you say the chimney could filter some of the higher reed harmonics giving a more mellow tone -- but it could also peak before cutoff giving a nasty nasal tone, who knows...

If it also increases the total chamber volume behind the reed then it could also help with the reed starting. Bass reeds -- especially ones with weighted tips -- can often choke and start slowly if the pressure in the chamber rises very rapidly, a slower pressure build-up can help prevent this. Depending on the size of the hole under the pallet, a bigger chamber can help prevent bass reeds choking when played hard.

Presumably Emmanuel and all those who have made and worked on these boxes would have a reasonable idea Ian. Maybe those in the know will be best equipped to comment. All the Best mory

What I said wasn't just based on theory, I've played boxes built like this which did exactly what I described, in fact I've got one sitting in my front room. The bass reed chamber size suggestion is also based on experience, including helping more than one maker with melodeon design.

That's the advantage of scientific analysis -- it's not just theory and analysis, it can be backed up by real life tests or measurements ;-)

I should also point out that there are instrument makers and repairers (and posters to Internet forums) out there (probably not Emmanuel!!!) who have some very strange ideas about how and why instruments sound the way they do, some of which are rather closer to homoeopathy than anything that makes any kind of sense...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11153
  • Wirral UK
    • Chris Ryall
Re: Melodeon making with Emmanuel Pariselle
« Reply #94 on: June 09, 2014, 01:37:32 PM »

That's the advantage of scientific analysis -- it's not just theory and analysis, it can be backed up by real life tests or measurements ;-)

That's what I think - but do you KNOW of any real life tests or measurements?

vix some form of frequency (dare I say phase?) analysis rather than "that sounds nice"  :P
Logged
  _       _    _      _ 

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Melodeon making with Emmanuel Pariselle
« Reply #95 on: June 09, 2014, 03:15:25 PM »

That's the advantage of scientific analysis -- it's not just theory and analysis, it can be backed up by real life tests or measurements ;-)

That's what I think - but do you KNOW of any real life tests or measurements?

vix some form of frequency (dare I say phase?) analysis rather than "that sounds nice"  :P

Listening tests -- "that sounds nice" -- are perfectly scientific, so long as you don't know what you're listening to and can show that you can still tell the difference.

Measurements are fine so long as you know what you're looking for and are aware that measurements can easily show differences that the ear can't perceive, like between 0.1% distortion and 0.001% distortion in an amplifier. I can guarantee that if you took several instruments which any amount of blind testing said sounded identical I could still easily measure differences between them, test gear is in many ways far more sensitive than the human ear. On the other hand the ear can pick out things (like low-level delayed resonances) which standard measurements like frequency response fail to detect -- which just means you're measuring the wrong thing.

Science doesn't say you have to be able to explain the reason for something at the time, but if not then you do have to be able to prove that a difference exists by experiment -- the "why" can come later. If what you find goes against scientific reasoning then you'd better have pretty good evidence before you start speculating about why a difference exists.

For example, if blind listening tests really do show that a Stradivarius sounds better even though you can't explain why, that just means you don't have the knowledge yet to explain the facts. Much blood sweat and tears has been spent trying to explain this superiority, without a conspicuous amount of success so far -- not least because on both the occasions I know of that proper testing has been done by experienced listeners and musicians, modern violins were preferred to the Stradivarius.

Especially in emotive subjects like music (and musical instruments), there's a lot of what I'd call "folklore" which is widely believed -- even by instrument makers and players! -- but is not borne out in practice, the "Stradivarius sound" myth being the most famous of these. Another example is the supposed fact that violins sound better over the years because of being played, which doesn't make sense if you know about the properties of wood and was also thoroughly debunked (see the "Powerhouse Twins" experiment). None of which stops the same "facts" being regurgitated again and again by people who *know* they're true, in spite of the evidence to the contrary...

Another example is the wood that melodeon outer cases are made from; many people believe this makes a difference in spite of the fact that there are very good acoustic reasons why it shouldn't, and the fact that at least one manufacturer (Strasser) says that they've shown that it doesn't following research in collaboration with a university. I'd say that means the odds are stacked heavily against it making a difference -- but if somebody actually *showed* that it did I'd change my mind, because the evidence had changed.

None of which says that instrument manufacturers are wrong when they say that a particular design feature makes an instrument sound better (or different), they could very well be correct -- but they could also be believing that it makes a difference when it doesn't, as has been shown many times in the past :-)
« Last Edit: June 09, 2014, 03:38:41 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Melodeon making with Emmanuel Pariselle
« Reply #96 on: June 09, 2014, 03:29:09 PM »

Beauty is in the ear of the beholder......?  :o
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Melodeon making with Emmanuel Pariselle
« Reply #97 on: June 09, 2014, 03:56:02 PM »

I finished the grill on Saturday.
looks really nice! wish I was building one.
On the finger bd. face plate in line with the holes for the buttons there is a slot or dado that was filled in on each row, was there a reason for that slot or was it just decorative?
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Melodeon making with Emmanuel Pariselle
« Reply #98 on: June 09, 2014, 04:16:50 PM »

On the finger bd. face plate in line with the holes for the buttons there is a slot or dado that was filled in on each row, was there a reason for that slot or was it just decorative?

Haha! Well spotted. I know but I'll let Graham explain.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Graham Collicutt

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 107
Re: Melodeon making with Emmanuel Pariselle
« Reply #99 on: June 09, 2014, 04:40:43 PM »

I'd rather not, but there were 3 rows of holes all in the wrong place, so while the saw was set up for inlaying (which I had decided against) the slots were cut, the veneers cut from some reject walnut, glued and then sanded all in about 10 minutes, by Emmanuel. My shame masked but not well enough.
Logged
Pages: 1 2 3 4 [5] 6 7   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal