Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Balsa  (Read 4900 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Balsa
« Reply #20 on: August 27, 2014, 09:28:46 PM »

I was just about to say that.  :P
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

pgroff

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1827
Re: Balsa
« Reply #21 on: August 28, 2014, 12:21:02 PM »

...and are scraped and buffed to achieve the required "perfection".  That should surely imply that our old boxes can be buffed back up to showroom condition?

I've wondered about this. Anyone actually tried it?

Yes, repairers buff and polish celluloid all the time.  But you have to be careful if it's not black or some other solid color that's easy to touch up.

I've seen many well-played old boxes with the celluloid worn right through at corners, so that's a warning of what can happen with over-buffing.  Pearloid or other patterned celluloid can be tricky to patch, and some types of celluloid have a different color below the surface layer (for example,  the grey layer under the top red layer, as seen on many old Paolos).  I recently bought a Paolo for sale online that looked good (shiny!) in the photos except for a broken letter of the logo.  It was sold by a shop that sells many accordions, and inspected in hand by their salesman,  a pro who should have known better, but who told me "no other cosmetic damage except for the broken letter and a metal brace added externally" -- but on arrival the box had many cosmetic problems (poorly filled extra holes from strap brackets, etc), but one of them was that the celluloid on the corners of the grille had been overbuffed. The celluloid there had been thinned until the aluminum of the grille showed through, leaving the color very pale there. 

PG
« Last Edit: August 28, 2014, 04:08:15 PM by pgroff »
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Balsa
« Reply #22 on: August 28, 2014, 01:42:27 PM »

Ericas are plywood, with solid wood corner blocks.
Interesting... I've never had cause to strip an Erica (never owned one although I've enjoyed playing other people's).

Rob.
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Balsa
« Reply #23 on: August 29, 2014, 02:41:01 PM »

To see ply used in glider construction, pay a visit to the Middle Wallop museum of Army Flying. There you can see various Horsa style gliders (the kind of thing used oh D-Day) and their construction. Paid a visit there with my (sadly now deceased) father in law who was a joiner by profession, and he went around muttering 'now then, very good'. He was from Hull.
I'm not sure about balsa reed blocks. If the reeds are waxed in, prising them off and or scraping off wax would be tricky without damaging the soft balsa.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Balsa
« Reply #24 on: August 29, 2014, 07:17:39 PM »

According to a TV prog yesterday the De Haviland Mosquito, and Vampire were both constructed if panels with balsa sandwiched between two layers of ply, formed with heat and pressure to get the curved shapes required.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal