Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: WHAT DO I DO NOW?  (Read 4547 times)

0 Members and 1 Guest are viewing this topic.

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: WHAT DO I DO NOW?
« Reply #20 on: June 24, 2015, 02:25:47 AM »

Back to your question about removing the reedplates...I have successfully removed reedplates on similarly constructed vintage melodeons in the following way:
1)rotate the retaining pins using a small pair of pliers with flat ended, non-serrated smooth jaws until the pins clear the edge of the reedplate.
2) using a thin, rounded tip artist's palate knife, work very gently around the perimeter of the reedplate while pressing slightly downward to compress the leather while attempting to slip the knife under the metal of the reedplate. DO NOT cut the leather, deform the reedplate, or contact the reeds with the palate knife.
It may take several trips around the reedplate with the palate knife to divorce the gasket and reedplate. Go easy and don't force anything
Logged
I'm squeezin' and they're wheezin': old junker boxes

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: WHAT DO I DO NOW?
« Reply #21 on: June 24, 2015, 07:52:38 AM »

That method should work well. 
You have a broken reed on reed plate no 1.  Unfortunately that can be difficult to replace.  You must remove the rivet, then find a new reed tonge to replace it with.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: WHAT DO I DO NOW?
« Reply #22 on: June 24, 2015, 09:14:22 AM »

I would imaging that the rivets, even if not drilled out, are not re-usable?
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: WHAT DO I DO NOW?
« Reply #23 on: June 24, 2015, 09:37:32 AM »

Finding a new rivet is easy enough, you just need a short length of round mild steel of the right diameter.  Finding a replacement reed the is hard bit.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: WHAT DO I DO NOW?
« Reply #24 on: June 24, 2015, 05:13:08 PM »

I work on bandoneons  and these are very similar. I have used aluminum aircraft rivets for years and have had no problems, very low risk of deforming the plate while setting it.
 Matching the hole in the plate with one on a reed (and a rivet) can be fun it often make the most sense to drill the plate/hole to the smallest rivet you can get that will work. Make sure you have your reed filed and centered on the rivet before you set it.
 Press the tongue of the reed into its slot while you rivet it so it stays centered when you set the rivet.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Ray Bird

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: WHAT DO I DO NOW?
« Reply #25 on: June 25, 2015, 07:40:10 AM »

The reed plates have been removed with minimal damage to the gaskets. Thanks for the advice.
While I have negligible experience with melodeons I do have the workbench skills to tackle the problem of the broken reed tongue.
Is it possible to purchase reed tongues or does one use some shim material to fashion one using the broken piece as a template for size and thickness?
I dips me lid to forum members. I admire their patience and generosity of spirit in helping out rank amateurs like me.
Ray Bird
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: WHAT DO I DO NOW?
« Reply #26 on: June 25, 2015, 07:55:36 AM »

I use reed tongues from old reed plates, that way you get the right alloy.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: WHAT DO I DO NOW?
« Reply #27 on: June 25, 2015, 02:23:38 PM »

Is it possible to purchase reed tongues or does one use some shim material to fashion one using the broken piece as a template for size and thickness?
Reed tongues are made of spring steel. An acquaintance who is also a well-respected concertina repairer and restorer makes reeds from old clock springs.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: WHAT DO I DO NOW?
« Reply #28 on: June 25, 2015, 02:37:31 PM »

Is it possible to purchase reed tongues or does one use some shim material to fashion one using the broken piece as a template for size and thickness?
Reed tongues are made of spring steel. An acquaintance who is also a well-respected concertina repairer and restorer makes reeds from old clock springs.

They are brass on this instrument if you look at the photos.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

invadm

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 614
Re: WHAT DO I DO NOW?
« Reply #29 on: June 25, 2015, 03:32:46 PM »

I have removed 2 of this single plate brass reed block from 2 different boxes(4 plate in total) some time ego and they are available if you cannot find them anywhere else..2 plate will  give you plenty of spare part for future repairs  :D   you can PM or e-mail me..just pay the postage cost from London & they are yours ..  cheers Mus     
« Last Edit: June 26, 2015, 09:16:32 AM by invadm »
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal