Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Ruggedized case for Tommy?  (Read 4381 times)

0 Members and 1 Guest are viewing this topic.

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Ruggedized case for Tommy?
« Reply #20 on: August 17, 2015, 07:25:21 PM »

That's exactly what I do when I'm going on tour with a box that needs to go in the hold Nick!  I find pants and socks provide perfect cushioning for the reed blocks and gives me extra space in my suitcase.

Mind you if you turn up late for a gig and have to go straight on stage it can be a little bit embarrassing when you have to take your pants out of your instrument before you can play a tune!!!
Do you mean that you actually open up the instrument and wrap pants and socks around and/or between the reed blocks?  :o
And what about the journey home at the end of the tour, when you've worn everything...?  :Ph

Does it prevent bum notes?
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ruggedized case for Tommy?
« Reply #21 on: August 17, 2015, 10:56:51 PM »

There just has to be a tune or album title in that Steve, 'Squeezy - the Commando Return' ??   ;)
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Ruggedized case for Tommy?
« Reply #22 on: August 18, 2015, 12:04:59 AM »

We are going to go and look at the Pelican 1560, Storm 2450, Storm 2500 and see if they are deep enough to get at least an inch of foam.  That seems to be the limiting factor for these cases, they are just not very deep, until they get too large.

Though Riley's suggestion to look more closely at the lighter (thinner plywood and/or foam) ATA-type cases is good.  Looks like stage lighting cases might be around the right size.  Will continue to scope out. 

Reason for all this: traveling by truck and camper, don't need to worry about airline size restriction. 

Was going to pimp out existing Castagnari case (it's about the right size) but not quite enough room for extra inch of good foam, plus still would not be humidity resistant at all, flimsy latches, etc.

I have talked to folks who use Pelicans for their concertinas and they say "nearly bulletproof".

If you want a case which will prevent damage to a melodeon when the baggage handlers drop it a couple of meters onto the tarmac an inch of foam probably isn't enough -- cases used for shipping expensive instrumentation usually have at least double this. This does mean a case which (including the walls) will be at least 5 inches bigger than the instrument in all directions, but then if it's going in the hold this doesn't really matter, they only care about weight not size (unless truly enormous).

[an inch of foam is probably OK for concertinas because they're smaller and lighter so need a smaller thickness to limit the g-force of shocks to the same level]

The lightest solution would be a moulded Pelican-type case if you can find one the right size, or you could get a lightweight board one custom-made (e.g. by swanflight) but it would still be a lot heavier. One alternative could be a heavy-duty moulded PA rack case, probably a 6U height would be about right and give enough space for a couple of inches of foam all round -- something like this http://www.gatorcases.com/p/29158-496/g-pro-6u-19 (alos available with pull-out handle & wheels).
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Chris Ryall

  • "doc 3-row"
  • French Interpreter
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 11154
  • Wirral UK
    • Chris Ryall
Re: Ruggedized case for Tommy?
« Reply #23 on: August 18, 2015, 10:37:51 AM »

At Liverpool airport the Ryanair handlers I watched, (and counted) were chucking cases up onto a conveyer and into the plane. One in 20 or so bounced on the conveyer and thence went ballistically onto the concrete. To be fair only about a 1.7m drop (:)

I extrapolated that "both ways"  that's a 1/10 chance of a fall, but there is of course also an "unload" phase within the terminal >:E and we are talking about the world's worst airline.

But that's why I do "soft case, in the cabin" as policy. My Gaillard is quite bulky, but would fit into the Ryanair ferret cage guage in Liverpool airport "naked", and if I ever had to take it that way, that's how it would travel. Anyone with a bulky instrument is recommended to pre-visit airport and test dimensions (as I have). 

I think you can also "buy a seat" for instruments … at a mere 3x the price for a human arse.

Other airlines, as per Finnair above, are more permissive. But even business class on Transat last week I had trouble wedging my "compact" van der Aa into the overhead locker past the wrangam other passangers had already stuffed in there.
« Last Edit: August 18, 2015, 10:41:23 AM by Chris Ryall »
Logged
  _       _    _      _ 

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Ruggedized case for Tommy?
« Reply #24 on: August 18, 2015, 02:49:26 PM »

Right about needing 2-4" of foam in an ATA-type case full the full tilt, airline-proof case.
But for going to "stage 2 or 3" up from the stock Casta hard case or Hohner padded rucksack, we were told that 1" of high density foam all around in a resin case would handle the Tommy in the "expected" disaster scenario: 1 m. fall off tailgate onto concrete, plus usual bumps and bruises, light rain exposure.
They recommended an inch of standard foam, even a ½" inside the 1" high density if it can be fit, for an extra margin.
Were told we might should look at a 12 unit tall microphone case too, they buy custom foam…

http://www.custom-foam-inserts.com/foam-types.htm
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Ruggedized case for Tommy?
« Reply #25 on: August 18, 2015, 08:05:41 PM »

Right about needing 2-4" of foam in an ATA-type case full the full tilt, airline-proof case.
But for going to "stage 2 or 3" up from the stock Casta hard case or Hohner padded rucksack, we were told that 1" of high density foam all around in a resin case would handle the Tommy in the "expected" disaster scenario: 1 m. fall off tailgate onto concrete, plus usual bumps and bruises, light rain exposure.
They recommended an inch of standard foam, even a ½" inside the 1" high density if it can be fit, for an extra margin.
Were told we might should look at a 12 unit tall microphone case too, they buy custom foam…

http://www.custom-foam-inserts.com/foam-types.htm

If it's going to go in an aircraft hold -- and possibly be chucked out of it, then fall off an overloaded pull-along luggage train when it goes round a corner, both of which I've seen more than once -- I'd go for the full two inches minimum, saving a couple of inches in each dimension -- which doesn't matter with checked-in luggage -- just doesn't seem worth the risk to me...

A Tommy is a bit of an unusual shape for most cases, but I did find several bombproof-looking aluminium cases starting at £75 -- cheap compared to a broken Tommy...
http://casemarket.co.uk/defender-ka44-016-aluminium-box---fae003547-731-p.asp
http://casemarket.co.uk/defender-ka74-001-aluminium-box---fae003379-743-p.asp
http://casemarket.co.uk/zarges-40700-eurobox-aluminium-crate-1485-p.asp
These are all 350 x 250 x 310 mm internal which sounds just about right for a Tommy with plenty of foam.
« Last Edit: August 18, 2015, 08:17:15 PM by IanD »
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Ruggedized case for Tommy?
« Reply #26 on: August 19, 2015, 02:22:14 PM »

Everyone still seem to be thinking airline, although Steve has said it's for a camping trip.  That should alow you to use less foam, relying on the integrity of the case's skin for a bit of rough handling.  The plastic cases have seals around their lids which will offer sufficient waterproofing and protect against humidity variations.  Shipping and airline travel are a whole different kettle of fish and bear in mind that whatever airline you are using you may have Ryanair or Air India baggage handlers if your airline doesn't have their own at the airport you're travelling to or from.

I've been airside and seen some of the games the baggage handlers play - I'd never let them get their hands on any of my boxes!  DTN's infamous slingshot using the straps to launch his Pokerwork into the air (and failing to catch it!) gives you some idea of what to expect.

Rob.
Logged

Steve C.

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2075
  • Erica, Morse Anglo
Re: Ruggedized case for Tommy?
« Reply #27 on: August 19, 2015, 11:09:41 PM »

Rob's point well taken--you cannot defeat an airline if they get your box away from you except with an Anvil-class case and appropriate foam. 

Those Defenders look to be nice cases though…not avail this side of pond.  Aluminum without plywood is too crushable, puncturable, though.

Among the resin cases, have narrowed down to an SKP and a couple Pelicans.  Will send details once foam is specced.

Thanks,  S.
Logged
Located in Central North Carolina, USA; credit for picture: livingplanet.ca

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Ruggedized case for Tommy?
« Reply #28 on: August 19, 2015, 11:41:42 PM »

A warning on the ali framed cases, if you can't see pop rivets or similar near the corners they will probably have been press or glue fitted to the corners - they tend to explode shedding sides then contents.

Other means of destruction are available.......
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal