Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Middle reed not tuned to 0 offset  (Read 11608 times)

0 Members and 1 Guest are viewing this topic.

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Middle reed not tuned to 0 offset
« Reply #40 on: November 24, 2015, 01:14:45 AM »

You get other odd "effects" on melodeons too - I've got one by Wilhelm Spaethe that has a vox humana on the treble side, along with a cock-crow, birdwhistle and cuckoo on the bass. Just think of the fun Sid Kipper could've had with that lot!  :D

Thanks for the enlightenment Steven, I'd guessed it was perhaps something like the harmonium stop, as for the other effects, you may be out of range but I'm sure there is a just detectable sound of gears meshing from the South West, which probably means Semyon will be asked if such a set of effects could be intalled in the quiet end of a certain cherepashka before it is despatched to Nick.

The rustic intruments that Sid failed to discover or master could fill a book, the Lithenspeil (often confused with the Phlintophone where the resonant bars are chipped rather than ground into tune) being the most serious omission, none survive, no drawings, no 30 fathom flint left to mine, 'Seahenge' removed from site, conflicting descriptions of construction and no funding available, we will never know if they really could attract whales onto the beach with one.  :(
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

triskel

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3290
Re: Middle reed not tuned to 0 offset
« Reply #41 on: November 24, 2015, 03:14:37 AM »

You get other odd "effects" on melodeons too - I've got one by Wilhelm Spaethe that has a vox humana on the treble side, along with a cock-crow, birdwhistle and cuckoo on the bass. Just think of the fun Sid Kipper could've had with that lot!  :D

... I'd guessed it was perhaps something like the harmonium stop, as for the other effects, you may be out of range but I'm sure there is a just detectable sound of gears meshing from the South West, which probably means Semyon will be asked if such a set of effects could be intalled in the quiet end of a certain cherepashka before it is despatched to Nick.

Well he might just about manage to fit the cock-crow or the birdwhistle into a cherepashka, but I can't see him managing it with the wooden pipes for the cukoo...  ???

Quote
The rustic intruments that Sid failed to discover or master could fill a book, the Lithenspeil (often confused with the Phlintophone where the resonant bars are chipped rather than ground into tune) being the most serious omission, none survive, no drawings, no 30 fathom flint left to mine, 'Seahenge' removed from site, conflicting descriptions of construction and no funding available, we will never know if they really could attract whales onto the beach with one.  :(

Is that anything like Joseph Richardson's Lithophone the "Rock Harmonicon" I wonder?  That still exists!

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Middle reed not tuned to 0 offset
« Reply #42 on: November 24, 2015, 04:41:28 PM »

IIRC the "Tremelodeon" simply had a shedload of tremolo, as you might guess from the name -- something like 20bps is my guess, at least it saved any discussions about which concert pitch it was tuned to...
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Broadland Boy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1243
  • Awful noises from Pokerwork, HA114G, BbEb Liliputs
Re: Middle reed not tuned to 0 offset
« Reply #43 on: November 25, 2015, 02:18:20 AM »

Methinks a leg extension ?  Doubt there's an agreed concert pitch standard for the key of Oh Ian, mebee bits of it were tuned to all of em :D

Ah, to have had the good fortune to live through the Kipper Age, mind you I was introduced to them by a Yorkie pal living in Dartford  :|bl
Logged
Richard A
Venit ventus contrarius ventus egrediente,
Omnes prope quid ventum est circa

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Re: Middle reed not tuned to 0 offset
« Reply #44 on: March 08, 2016, 01:59:20 PM »

Just found this thread. I was lent a 1970's LP featuring a track by the Kipper Family, I think called 'Strip The Widow'. I digitised it and still laugh my socks off every time it comes up on my iPod in the car. There's one sound which I assume is coming from a melodeon which sounds like a sheep being rhythmically squeezed. Heard nothing like it since.
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

John MacKenzie (Cugiok)

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2360
  • Fettling... Learning to reed and right.
Re: Middle reed not tuned to 0 offset
« Reply #45 on: March 08, 2016, 02:46:14 PM »

Nearly all of the  Baffettis I've worked on and most of the Saltarelles are tuned to A=442Hz which is equivalent to about 8 cents sharp, it's been the default fir quite a long time for those makes. Castagnari seem to stick to 440.

Could this be why, I find most Salterelles, harsh on the ear?

Sir John
Logged
There is no beginning to my talent :)



: Hohner Club Modell 1. Bb/Eb, de-clubbed : Early Hohner Pressed Wood A/D : 1930's Varnished wood G/C:  Hohner Erika C/F: Bandoneon tuned D/G Pressed wood: Koch F/Bb; G/C Pre Corso

blunderbox

  • Good talker
  • **
  • Offline Offline
  • Posts: 74
Re: Middle reed not tuned to 0 offset
« Reply #46 on: March 08, 2016, 06:04:03 PM »

Being naive, when I had my box tuned, it came back with the middle reed at ~442, which I didn't really notice until I took out the bass blocks and sent them off to get new reeds, which came back at 440, things are now a little ugly. 
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Middle reed not tuned to 0 offset
« Reply #47 on: November 17, 2019, 12:33:51 PM »


I have an old wreck
Each note is +50 approximately.

What is A?     Is  A = 455? ?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Middle reed not tuned to 0 offset
« Reply #48 on: November 17, 2019, 12:51:42 PM »

In that case A is Bflat.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Middle reed not tuned to 0 offset
« Reply #49 on: November 17, 2019, 01:04:13 PM »

In that case A is Bflat.

Yes, C is right between C and C #, E is right between E and F and so on,
 but what value have they chosen on their "standard A"?
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Middle reed not tuned to 0 offset
« Reply #50 on: November 17, 2019, 01:20:12 PM »

Ignore my last comment, complete nonsense!

Old Philharmonic pitch had A at about 452.  That may be what you have.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Middle reed not tuned to 0 offset
« Reply #51 on: November 17, 2019, 03:05:33 PM »

From the calculators on this page http://www.sengpielaudio.com/calculator-centsratio.htm I find that 50 cents is equivalent to a frequency ratio of 1.029302.  So your A would be about 452.9, not too far from 452.
Logged

Stockaryd

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 255
Re: Middle reed not tuned to 0 offset
« Reply #52 on: November 17, 2019, 08:35:46 PM »

Thanks for the help

My tuner were set  A=440
example:    C (H)  +47    (M)   +59     (L)  +48   

It was the same everywhere     -  every reed 
Is it possible to set these down to 0

(H) and (L) lie down while (H) stands up
The blocks glued to the fondo

Sorry, modified   
(H) and (L) lie down while (M) stands up 
« Last Edit: November 17, 2019, 10:20:25 PM by Stockaryd »
Logged
Hohner Corso, Hohner Erica, Emmanuel Pariselle, Gessner,   Koch,   Mariotti,    "China  NoName",   4 Toy,     -and now some more

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Middle reed not tuned to 0 offset
« Reply #53 on: November 17, 2019, 09:51:05 PM »

Quote
(H) and (L) lie down while (H) stands up

Is this really so ??  In previous parag. it seems you have L, M and H (in which case L would typically stand up).  Anyway, yes it is possible to bring them down, either by filing (more or less) halfway along the reeds to make them more flexible or by loading the tips with small amounts of solder.
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal