Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Wax Heaters  (Read 7116 times)

0 Members and 1 Guest are viewing this topic.

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Wax Heaters
« Reply #20 on: December 09, 2015, 04:12:26 PM »

I was given an electric briki by my Cypriot inlaws Graham, with a little red light that switches off when the coffee's ready. Any good for waxing jobs do you think?
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Wax Heaters
« Reply #21 on: December 09, 2015, 06:07:35 PM »

Could be; I've no direct experience of electric brikis (though they're readily available here in Cyprus), but bearing in mind that their purpose is to bring the coffee/water mix to JUST boiling point and then reduce the temperature automatically, they might just work. Unfortunately I have no idea what the boiling point of the coffee/water suspension is! I use a briki simply because I had a spare one knocking around, it's made of a substantial gauge of metal so it cools very slowly, and it's about the right size and shape for the job.

Sorry not to be of more help
Cheers
Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Wax Heaters
« Reply #22 on: December 09, 2015, 07:35:14 PM »

I recently purchased a Ranger Melt Art Melting Pot http://www.carolescraftsuk.co.uk/product-p/229908.htm for around £40 after much research, I couldn't work out whether the cosmetic wax pot's would get hot enough as the wax it was designed for had a much lower melting temperature. This Melt pot has a control range for 40 to 170 degrees C.

Ebay had them quite cheap from the States but not sure about the cost of P&P or how long it would take. Haven't had time to try it yet but looks good.
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Wax Heaters
« Reply #23 on: December 09, 2015, 09:17:04 PM »

It would be good to know what the ideal working temperture is ?
I bet someone knows!!! ps I didn't do a search

then you could use a heat sensor on a surface or thermometer to see if wax is going to get or is getting hot enough.
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Wax Heaters
« Reply #24 on: December 10, 2015, 12:25:17 AM »

Haven't had time to try it yet but looks good.
Hi, Nigel,

I saw that one but couldn't tell from the pic even what shape it is!  If you have a moment when you're playing with it trying it out, could you post a picture?

Rob
Logged

NineOclock

  • Member
  • *
  • Offline Offline
  • Posts: 18
Re: Wax Heaters
« Reply #25 on: December 10, 2015, 02:24:32 PM »

Rob Hopefully 1 photo, Seems to work well comes with a lid for the Pot and a paddle. Only thing against (apart from the odd shape) is that it comes with a 2 pin plug which I will change but at the moment using with a shave plug adapter. Its only 130W so isn't quick at melting but I melted a couple of short sticks in the photo which didn't take that long, set to 80deg.


Nigel
Logged
Nigel Sparkes
Salterelle Pasteurelle 3, Tara. Oakwood model 2, Hohner Morgane, Hohner One row 's in G,D & C. Pokerwork DG & GC, Corso CF, Eb/Bb, Castagnari Dony

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Wax Heaters
« Reply #26 on: December 11, 2015, 07:13:59 PM »

Right, I just had my first go at waxing! Doesn't look especially neat but I only waxed one valve closed in the process ::)
There's certainly a knack; I had to be pretty quick going between the pot and the reed block.

The £9.50 pot worked well though. I had to tilt it to load the spoon better, but that's likely due to the design of the spoon I'm using.
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Wax Heaters
« Reply #27 on: December 12, 2015, 07:18:51 PM »

I can't really understand why (almost) everybody here seems so concerned about cost and saving a few £ or $.  Professional jobs require professional tools! One reason why I actually enjoy waxing reeds is because I know that I can concentrate on what I'm doing rather than get frustrated because of having spent a little less and bought cheap/inadequate/short lasting equipment.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Wax Heaters
« Reply #28 on: December 12, 2015, 08:07:05 PM »

Agreed.  Buying and using good tools is one of the pleasures of making and renovating things.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Wax Heaters
« Reply #29 on: December 12, 2015, 08:57:54 PM »

I do most of my work with hand tools these days, and spend less and less time using power tools, because I enjoy the process more. My favorite tools come from the nineteenth century and early twentieth. A good tool facilitates the work rather than detracts form it. I find myself making some of the tools I use because many new ones are poorly made and the good ones, when found, are very expensive. Custom tools can be made to fit the user precisely. I learned metal working at an early age so that I could make wood working tools. I would encourage folks to try and make a few tools.
Logged
I'm squeezin' and they're wheezin': old junker boxes

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Wax Heaters
« Reply #30 on: December 12, 2015, 10:04:34 PM »

I've definitely learned my lesson on cheap tools.  But in this case, it was not a cost saving issue.  I already had a burner, and a pot, and water, and it seems to work fine, so it's never even occurred to me to get something else.  Biggest potential problem is forgetting to turn it off, which wouldn't be good.  And maybe if I save a little money here and there, Santa will bring me a laser someday. ;D

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Wax Heaters
« Reply #31 on: December 13, 2015, 11:25:55 AM »

Not all of us are just looking for the cheapest, though once a suitable tool is identified it doesn't hurt if you find a good price too.  With a wax heater, it would ideally be powerful but with thermostatic control which has a small hysteresis.  Unfortunately, as with so many things melodeon related, you can't buy an off the shelf tool designed specifically for the job in hand.  Whilst some will accept merely adequate tools to work occasionally on their own box, discussing options is necessary as sellers of heaters don't give any useful technical detail - we have to listen to the experience of others.  I'd particularly like to know how long it takes to melt a useful quantity of wax - if it takes more than half an hour I may not have time to do the job, so I'd stick with a soldering iron.

Rob
Logged

Prestidigitator

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 448
  • Saltarelle, Hohner, Oakwood Baffetti
Re: Wax Heaters
« Reply #32 on: December 13, 2015, 01:21:16 PM »

Agreed.  Buying and using good tools is one of the pleasures of making and renovating things.

I couldn't agree more. With most things, the old saying "buy cheap and you buy twice" frequently holds good. I've also spent years getting (or trying to) a living at sea, where the difference between decent gear, including tools, may mean the difference between seeing your home port again, or not.
I've still got woodworking tools that were handed down to me, or which I had from the days when schools taught carpentry and, apart from the quality and durability, they are "old friends" that have worn and grown old with me. It's always a pleasure to pick up and use a fine tool, and whilst I appreciate that some people can do wonders with cheap equipment, I personally feel that I do a better job with good tools.
Logged

911377brian

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1518
Re: Wax Heaters
« Reply #33 on: December 13, 2015, 01:38:44 PM »

Having been robbed of some fine old tools recently, including Distan saws etc I heartily agree.Although the insurance company has been very good I'll never be able to replace them to the same standard. Luckily I don't rely on them to make a living any more...
Logged

Psuggmog Volbenz

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 318
    • musical whimsy
Re: Wax Heaters
« Reply #34 on: December 13, 2015, 11:40:34 PM »

Not all of us are just looking for the cheapest, though once a suitable tool is identified it doesn't hurt if you find a good price too.  With a wax heater, it would ideally be powerful but with thermostatic control which has a small hysteresis.  Unfortunately, as with so many things melodeon related, you can't buy an off the shelf tool designed specifically for the job in hand.  Whilst some will accept merely adequate tools to work occasionally on their own box, discussing options is necessary as sellers of heaters don't give any useful technical detail - we have to listen to the experience of others.  I'd particularly like to know how long it takes to melt a useful quantity of wax - if it takes more than half an hour I may not have time to do the job, so I'd stick with a soldering iron.
Rob
The melt time of the wax would depend on the composition of the wax and the output of the heating element.
It is very easy to make an inexpensive wax heater these days, now that Digital PID Temperature Controllers can be purchased for less than $20. All you need is the controller, a thermocouple in the desired heat range, a power source, and a heating element, and possibly a relay, depending the controller used. Here is a link for a cheap controller:
http://www.newegg.com/Product/Product.aspx?Item=9SIA0U008H8587&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Other+hand+Tools-_-9SIA0U008H8587&gclid=CIGV5YKB2skCFcRffgodUOQKdQ&gclsrc=aw.ds

« Last Edit: December 13, 2015, 11:46:27 PM by Psuggmog Volbenz »
Logged
I'm squeezin' and they're wheezin': old junker boxes

robotmay

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 820
Re: Wax Heaters
« Reply #35 on: December 14, 2015, 02:31:14 PM »

Yes normally I would invest money in good tools, however this time I'm willing to take a gamble on a < £10 heater as it's a pretty simple piece of kit and I'm not willing to drop £50-100 on something when a cheap alternative works. Worst case scenario is that it breaks and I lose £10, but so far it seems to be working well and doesn't heat the wax too much.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal