Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Binci vs. DIX bass reeds  (Read 8312 times)

0 Members and 1 Guest are viewing this topic.

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Binci vs. DIX bass reeds
« Reply #40 on: August 23, 2016, 10:24:35 PM »

What I find interesting about the dix reeds is that the harmonikas factory actually makes "concertina reeds" which are basically the dix set with concertina reed shaped frames. They need modifying to fit into a concertina reedpan (filing and angle on the sides and presumably the reed slot as well) but a few concertina makers use them with great results or so I have heard.


Lars

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 797
Re: Binci vs. DIX bass reeds
« Reply #41 on: August 24, 2016, 12:54:56 PM »

What I find interesting about the dix reeds is that the harmonikas factory actually makes "concertina reeds" which are basically the dix set with concertina reed shaped frames. They need modifying to fit into a concertina reedpan (filing and angle on the sides and presumably the reed slot as well) but a few concertina makers use them with great results or so I have heard.

The sides are angled when you get them from the factory. Only the 'vent' will need angling to get it close to a 'true' concertina reed. I'm not sure it's that easy, as the reed riveted in place makes it just about impossible. They do sound nice enough as they are - a step between hybrid concertinas and true concertina reeds.
Logged

Jake Middleton (brinwins)

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 102
  • Concertina Maker and repairer
    • Wolverton Concertinas
Re: Binci vs. DIX bass reeds
« Reply #42 on: August 25, 2016, 10:20:37 AM »

What I find interesting about the dix reeds is that the harmonikas factory actually makes "concertina reeds" which are basically the dix set with concertina reed shaped frames. They need modifying to fit into a concertina reedpan (filing and angle on the sides and presumably the reed slot as well) but a few concertina makers use them with great results or so I have heard.

The sides are angled when you get them from the factory. Only the 'vent' will need angling to get it close to a 'true' concertina reed. I'm not sure it's that easy, as the reed riveted in place makes it just about impossible. They do sound nice enough as they are - a step between hybrid concertinas and true concertina reeds.

Some time ago there was a long discussion about those reeds on concertina.net and some people reported receiving reeds with plates angled at the side and some got flat sides, Maybe the company started offering them with the angle at a certain date I am not sure.
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal