Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Carbon fiber instead of brass rod for keyboard axle  (Read 2702 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #20 on: October 05, 2019, 04:55:19 PM »

Winston,  that was one method I was considering.  Next step is I am going to make up a dummy lever with brass bush to get an accurate measurement of the movement in place. The .05mm clearance is more than you find in new Italian metal actions. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #21 on: October 06, 2019, 04:12:40 PM »

Winston,  that was one method I was considering.  Next step is I am going to make up a dummy lever with brass bush to get an accurate measurement of the movement in place. The .05mm clearance is more than you find in new Italian metal actions.

Needless to say, I'm leaving it entirely up to Theo -- I don't care *how* he fixes it so long as it's properly fixed... ;-)

[but finding out that not all "2mm" rods are even nominally 2mm wasn't easy, not many suppliers specify the exact diameter and tolerancing...]
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #22 on: October 06, 2019, 04:29:10 PM »

It’s fairly normal that metal,  even ground to size, is normally slightly under the nominal size.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

IanD

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1703
  • Too many melodeons...
Re: Carbon fiber instead of brass rod for keyboard axle
« Reply #23 on: November 03, 2019, 02:36:18 PM »

Winston,  that was one method I was considering.  Next step is I am going to make up a dummy lever with brass bush to get an accurate measurement of the movement in place. The .05mm clearance is more than you find in new Italian metal actions.

Needless to say, I'm leaving it entirely up to Theo -- I don't care *how* he fixes it so long as it's properly fixed... ;-)

[but finding out that not all "2mm" rods are even nominally 2mm wasn't easy, not many suppliers specify the exact diameter and tolerancing...]

In the end Theo drilled out both the keyboard and levers to take a 2.2mm diameter axle rod -- problem solved :-)
Logged
Oakwood Model 4 D/G, Castagnari Dony D/G/#, Castagnari Tommy G/C, Baffetti Binci D/G, Hohner Preciosa D/G, Melos Bb/Eb, Lightwave SL5 and Kala California fretless basses
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal