Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3]   Go Down

Author Topic: Bass/Treble Balance  (Read 8211 times)

0 Members and 1 Guest are viewing this topic.

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass/Treble Balance
« Reply #40 on: January 16, 2020, 09:46:46 PM »

I found that the BBC were incredibly clued up and very very fast to problem solve compared to even very good studio technicians.
The orchestra set up in the BBC Maida Vale studios in NW London and about 5 minutes into the first take, the studio manager (or whoever) came in from the control room and stopped the playing.
I know those studios well. I did my first recording there (and many subsequent ones). The first one was a re-recording of Sailing By. I've yet to find out which version they use on the Shipping Forecast. If they did indeed use the 1980s one I played on, then I'm due some royalties. I've never had a response from the Beeb about it. I should try harder to find out. Mind you I can't bear the tune.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Bass/Treble Balance
« Reply #41 on: January 17, 2020, 05:45:46 AM »

  The basses get a raspy and flatulent sound, and the hi and low bass diverge from one another.

Check your valves.

 The valves are fine, replaced new about 2 yrs. ago.

 
Hohner bass reeds do vary greatly in their tonal quality, and in their pitch stability.  Some of the older ones on Zinc plates have a lovely smooth sound, respond quickly, and have pretty good pitch stability (for bass reeds).

Bass reeds can take an appreciable length of time to come up to their stable pitch, so in normal play they may never reach their "correct" pitch.  To compensate when tuning bass reeds I sometimes find that they sound better tuned so that their stable pitch is a little sharp.  This is a matter of judgement and will vary depending on the reeds, and they way they are played.

Thanks Theo....They are Hohner reeds, one set is H on zinc, all the rest are T on aluminum plates. I appreciate the tip on tuning. Thanks to everyone for the comments!
« Last Edit: January 17, 2020, 06:07:27 AM by forrest »
Logged

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Bass/Treble Balance
« Reply #42 on: January 17, 2020, 09:03:15 AM »

     But back to my enquiry, which I perhaps had not defined well enough. Firstly, the bass reeds are not too loud. It's that their tonal quality and pitch is not good.
Fair enough, but I suspect your thread title set the agenda for the discussion that followed.

I'd hazard a guess that you were using lower pressure when checking the bass reeds on your tuning rig than they are subjected to while being played in the box.
The rasping quality may be because of excessive reed movement at the tip, possibly hitting the valve or adjacent block. That would certainly sound rough!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Bass/Treble Balance
« Reply #43 on: January 17, 2020, 02:15:26 PM »

     But back to my enquiry, which I perhaps had not defined well enough. Firstly, the bass reeds are not too loud. It's that their tonal quality and pitch is not good.
Fair enough, but I suspect your thread title set the agenda for the discussion that followed.

I'd hazard a guess that you were using lower pressure when checking the bass reeds on your tuning rig than they are subjected to while being played in the box.
The rasping quality may be because of excessive reed movement at the tip, possibly hitting the valve or adjacent block. That would certainly sound rough!
I've had this, on a well tuned box, and it was difficult to identify, but easily sorted by skilled hands (not a DIY fix).
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

forrest

  • Other Places::
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1009
  • digits still functioning
Re: Bass/Treble Balance
« Reply #44 on: January 17, 2020, 07:04:55 PM »


I've had this, on a well tuned box, and it was difficult to identify, but easily sorted by skilled hands (not a DIY fix).

Yes, good advice, but unfortunately, skilled hands for this are far away. And the nearest to me, at 250 miles distance, informed me that Hohners were junk and not worth the effort and expense. That was 20 odd years back, but nothing has changed. Since that time, I have undertaken my own repairs and tuning, with the help of Theo and Diatonix, and others.  ;)
« Last Edit: January 17, 2020, 07:08:03 PM by forrest »
Logged

Earl Bryce

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Bass/Treble Balance
« Reply #45 on: January 24, 2020, 07:01:00 PM »

Having just gone through tuning my own Hohner, I noticed that the bass reeds are significantly thinner (in thickness, not width) towards the rivet than they are at the tip, almost as if they were ground down. I’m not sure if this is normal for all bass reeds or not?
The result of this, as far as my inexperienced guess can take me, is that the reed is weak. The gap needs to be set fairly far, otherwise the tongue is sucked in and there’s not enough spring for it to pull out and vibrate. I realize that can happen with any reed, but it seems to me that the dynamics are off, that the weight at the tip is too heavy for the thickness at the back to support an even vibration.
I hope this all makes sense, and perhaps this is normal, Ive never had the opportunity to examine other reeds, but is it possible that a scenario like this is the cause for your bass reeds being unreliable and finicky with tone and pitch?
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Bass/Treble Balance
« Reply #46 on: January 24, 2020, 07:11:22 PM »

It’s normal for low pitch reeds to be thinner towards the fixed end.  It’s a consequence of making reeds small enough to fit into a sensible sized box.  If the bass reeds were the ideal length they could be half as long again, or more.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Earl Bryce

  • Member
  • *
  • Offline Offline
  • Posts: 21
Re: Bass/Treble Balance
« Reply #47 on: January 24, 2020, 08:07:46 PM »

Ahh good to know. I figured there would be a trade off somewhere in either length or thickness, but I had no idea it was that drastic. Although I suppose it makes sense, if the low basses are an octave lower. Thanks Theo!
Logged
Pages: 1 2 [3]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal