Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Converted my "toy accordion" melodeon to single voice; next steps?  (Read 6436 times)

0 Members and 1 Guest are viewing this topic.

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #20 on: February 13, 2021, 05:09:17 PM »

Some people call the edge in coining, same as the process used for coins, obviously. Coins start as flat disks and are stamped and coined to make the face and the edge. Spent some time, a few days over the last few years in a coin factory, interesting how it is done.

Had a go at coining but it seemed a lot easier to use old junker pa reeds with already suitable gaps of which i have a plentiful supply.

The nail varnish was brendan power, harmonica legend. Harmonicas are a lot more critical for air usage, you cannot make a bigger pair of lungs.
Logged

Gav Wood

  • Good talker
  • **
  • Offline Offline
  • Posts: 99
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #21 on: February 14, 2021, 08:05:45 AM »

Not sure how to paste a link in here, but this is the copy and paste of the reed response varnish thread.

http://forum.melodeon.net/index.php/topic,23380.msg278688.html#msg278688

If the gap is too wide this may not work as is planned for closing small gaps.



Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #22 on: February 14, 2021, 08:41:01 AM »

"Anvil" in this case is the magnet core from a very large hard drive disc comb. it weighs about 2 lbs and is about the size of my fist.It has a odd shape and is a all purpose heavy object in the shop.
Reed plate aluminum is pretty ductile , you just have to get a feel for how far back you can drift the metal from, get too close and you can just end up chipping off the edge.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #23 on: February 14, 2021, 09:01:43 PM »

"Anvil" in this case is the magnet core from a very large hard drive disc comb. it weighs about 2 lbs and is about the size of my fist.It has a odd shape and is a all purpose heavy object in the shop.

Great info, thanks!

Can you clarify slightly what materials you recommend for replacing the valves on the Toys? And do you recommend replacing the valves just as soon as one gets the instrument, or just if the current valves start causing trouble?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #24 on: February 15, 2021, 01:03:27 AM »

Can you clarify slightly what materials you recommend for replacing the valves on the Toys? And do you recommend replacing the valves just as soon as one gets the instrument, or just if the current valves start causing trouble?

If you are restoring/rebuilding the instrument, it's worth installing new valves throughout - it's not always possible just by looking to see if a valve needs replacing. I would recommend the vinyl type for the toy melodeons, although you could go for overkill and use leather valves. Either way, don't try making your own; it's just not worth it and you are unlikely to be able to achieve the thinness and flexibilty of both the main and subsidiary leaves which act as booster springs. The proper valves are cheap as chips* to buy and will give you the best response possible from your reeds.

Measure the lengths you need and order them from Charlie Marshall (CGM Musical). He's based in Scotland but will ship internationally. Very good, very reliable. Just be sure to order a few more than what you think you need, to give you a few spares in case you mess up a few valves during the installation. Use sharp scissors to trim the valves to length and trim the booster leaves by a proportional amount.

If you don't want to order from Charlie, I guess Kymric Smythe in Oakland CA might be able to help, or the Button Box in Sunderland MA might supply you with some valves (although they don't advertise spare parts on their website; it might be worth giving them a call).

The importance of good quality, well fitted, valves is so easily overlooked. These cheap and innocent looking things can make the difference between an instrument playing well or being an absolute dog.


*french fries
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #25 on: February 15, 2021, 07:13:25 AM »

Didn't Nick CB solve the bellows problem (to an extent) by connecting two sets of chanson bellows together and covering the whole lot in some sort of car paint?

Found this video on YouTube


Ha, yes I did. I’d more or less forgotten that. It was car glitter paint.
  Having set out to see if I could improve the instrument I think I nearly achieved that, then lost interest when the Organetto came along!
    In the end, the whole thing went to our own Malcolm Bebb for further fiddling with.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #26 on: February 15, 2021, 07:45:15 AM »



[/quote]

Great info, thanks!

Can you clarify slightly what materials you recommend for replacing the valves on the Toys? And do you recommend replacing the valves just as soon as one gets the instrument, or just if the current valves start causing trouble?
[/quote]

If it is just one of the little toy accordions then old audio or VHS tape should work for valves.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #27 on: February 15, 2021, 03:56:32 PM »

  Having set out to see if I could improve the instrument I think I nearly achieved that, then lost interest when the Organetto came along!

Which make of Organetto did you get? I'm tempted to get one of the toy-sized yet quality options by Angelo Piccoli or Cailloux.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #28 on: February 15, 2021, 11:32:43 PM »

The big problem with the bellows is that the gusset material is both highly porous and very well glued to the card. The rounded shape of the bellows makes it a much bigger job to build a new set.
Nick sprayed his bellows with silver car paint and glued two sets end to end, it has Hohner reeds. Still leaks but you do get longer before you run out of air and it's less flapping your arms about than the unmodified version.
I tried covering the gussets with thin leather, which worked to an extent but was difficult to get right. Previously I tried sealing the gussets with flexible tent seam cement, also partially successfully.
I ditched the original brass reeds, they are horrible, and used a set of modified German or Italian (probably a mix of both!) PA reeds retuned to D using the original blocks. I made new mounts for the bass reeds, but gave up before I got them working properly. 
The mechs are flimsy and can be a poor fit, they can foul the case and not fully close, but OK for a box that's never going to be played hard  :||: I stole a single treble lever from a donor box to make a Hohner style air button, but it wasn't a job I would care to exhibit. 
PS after completing this box I put all the Chanson parts I had left in a cardboard box and sold them on Ebay to prevent me spending more time playing with them! But it was fun and instructive, and I still play one occasionally.
« Last Edit: February 15, 2021, 11:38:54 PM by malcolmbebb »
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #29 on: February 16, 2021, 07:22:57 AM »

  Having set out to see if I could improve the instrument I think I nearly achieved that, then lost interest when the Organetto came along!

Which make of Organetto did you get? I'm tempted to get one of the toy-sized yet quality options by Angelo Piccoli or Cailloux.

   Sorry, I meant Organett. On the box it says THE ENCORE. MOST POPULAR, LOUDER THAN A CORNET
Made by Hohner of Germany
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #30 on: February 16, 2021, 07:55:26 AM »

  Having set out to see if I could improve the instrument I think I nearly achieved that, then lost interest when the Organetto came along!

Which make of Organetto did you get? I'm tempted to get one of the toy-sized yet quality options by Angelo Piccoli or Cailloux.

   Sorry, I meant Organett. On the box it says THE ENCORE. MOST POPULAR, LOUDER THAN A CORNET
Made by Hohner of Germany

The Hohner Organetta? The little electric reed organ?

Or is this a Melnet running joke that's going over my head?
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #31 on: February 16, 2021, 07:59:42 AM »

  Having set out to see if I could improve the instrument I think I nearly achieved that, then lost interest when the Organetto came along!

Which make of Organetto did you get? I'm tempted to get one of the toy-sized yet quality options by Angelo Piccoli or Cailloux.

   Sorry, I meant Organett. On the box it says THE ENCORE. MOST POPULAR, LOUDER THAN A CORNET
Made by Hohner of Germany

The Hohner Organetta? The little electric reed organ?

Or is this a Melnet running joke that's going over my head?

Hohner Organette. Google is your friend:
https://www.youtube.com/watch?v=jbFFV87suOI
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #32 on: February 16, 2021, 08:30:16 AM »


I ditched the original brass reeds, they are horrible, and used a set of modified German or Italian (probably a mix of both!) PA reeds retuned to D using the original blocks. I made new mounts for the bass reeds, but gave up before I got them working properly. 

The bass reeds are touchy, a regular accordion reed wants to choke at the higher pressure involved , opening the gap makes little difference. It has to do with how the reed works and it is something I only really got my head around recently since these little things work at a pretty high air pressure.
 You need a narrow reed with a weighted tip, shorter than you would normally use. The performance is not awesome but it works pretty well.
 The reeds are hard to come by and I end up having to use my limited supply of old (San Francisco made?) Colombo reeds from the 40's. Beautiful hand made reeds with a curve like a airplane wing sanded in ,but only about 70% as wide as is typical,
 Opening up the hole for that reed helps too, the turbulence of the air going through the small valve opening causes distortion. The stock chinese reed is very narrow and rather short so it also uses less air.
 The little Flea accordions are eating up my supply so I will need to keep an eye out for another donor.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #33 on: February 17, 2021, 04:06:25 PM »

I'm going to be posting a video review of my Eastar toy on YouTube soon (still teaching myself to do fancier stuff on iMovie), and will post that when done. The first video will be just of the unmodified instrument, and I'll do follow-up videos about how to single-voice one of these.

Mine is playing way better since I single-voiced it, but with the wetness gone I can much more clearly note some discord in tuning. The main issue I'm facing is that the overall box is running a quarter-step sharp of Key of C, which is not a total dealbreaker but means that someone playing with say a fiddler or guitarist would have to ask that person to tune to the melodeon. But for vocal accompaniment or solo, not a major deal, and sailors/miners/factory laborers who played these probably had them at various weird pitches (and cheap bronze reeds).

The stickiest wicket though is everything is pretty reliably running C half-sharp, but the actual C reeds are both at concert C. So I need to either raise one of the C reeds to C half-sharp, or bring every other reed in the box down to concert pitch. I'm lazy, so I'm going to go reed read up on how to tune reeds. I'm nomadic so most of my gear is in storage, but I do have a set of needle files in my little traveling tool bag (all fits in a shaving bag), so I imagine I have what I need. Anyone recommend any specific tutorial on reed tuning that I can follow to raise a reed up a quarter-step?
Logged

Gena Crisman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1108
  • 🇬🇧
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #34 on: February 17, 2021, 05:14:40 PM »

how exactly did you single voice it? I cut out a square piece of paper with a straight line cutout for all the reeds I wanted on on one side (e) and stuck it under the reedblock. I realised though that, some reeds on one side of the block or the other performed better or were more usefully in tune, and was going to alternate which reeds I allowed to be active by punching holes on alternative sides in my blocking material.
« Last Edit: February 17, 2021, 05:21:37 PM by Gena Crisman »
Logged

Kimric Smythe

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 712
    • Smythe's Accordion Center
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #35 on: February 17, 2021, 05:15:16 PM »

"The main issue I'm facing is that the overall box is running a quarter-step sharp of Key of C"

You may have set yourself up with the wet tuned bank of reeds. Try the other bank and see if they are better.
It is entirely possible that the entire thing is out of tune though.
Logged
Smythe's Accordion Center
Pinole, California
Sales and repairs since 1997

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #36 on: February 17, 2021, 05:24:45 PM »

"The main issue I'm facing is that the overall box is running a quarter-step sharp of Key of C"

You may have set yourself up with the wet tuned bank of reeds. Try the other bank and see if they are better.
It is entirely possible that the entire thing is out of tune though.

Try what Kimric has suggested first, to check whther you have inadvertently blocked off the M 'at pitch' reeds so that only the M+ reeds are sounding.

I would advise against sharpening the reeds to match the others. It's much easier to flatten reeds than to sharpen them, especially those pesky underneath pull reeds. Far better to bring the whole thing down to concert pitch C. Then you also would not need to ask fiddle players too tune sharp, and would be able to play along with other melodeons and concertinas, etc., which are already at concert pitch.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #37 on: February 18, 2021, 09:12:40 PM »

This is one of those moments that really hammer-home "take notes on what you're doing." I have spent too many times opening and closing this box because I keep thinking I'm going to remember what stage of the game I'm at, then I realize I don't. So when I make a video about this, I'm going to make it very clear that taking notes is key, at least for free reed novices like me.

So, I bristled a bit at the suggestion that I'd be so thick as to mistake the M+ for the M, since I'd tried both banks and found them unsatisfactory. So I finally sat down and took a few minutes to tape off one bank and then the other, testing each with a tuner... and actually wrote down this time what was what, and the one I had sounding when I posted above is the worse of the two, so would be the M+. But in my defense the "M" set is still somewhat off, just not as much.

I'm using Instuner so it has five little lines between each half-step, and the "M+" bank reliably runs 2-3 lines sharp (so up to a quarter-step sharp), while the "M" bank runs 0.5 to 1 line sharp. So one is better than the other, but the better one is still slightly sharp. (Note this is setting aside the C/D and the f/g which are presenting their own little problems).

I am totally new to tuning reeds, so I had no idea it's easier to lower a reed than to raise it, but that's good news in my case. I don't want to make anyone repeat things that have been discussed plenty of times, and I can google up tutorials, but does anyone have a totally preferred tutorial that would apply well to this instrument that I should read? And if anyone has the 10-second explanation "why it's easier to lower than raise a reed", I'm all ears.

As noted above, the C/D is actually in-tune somehow, but the C of one bank and the D of the other are the best ones, so I have to tape off reeds directly vice taping the bottom of the chamber. And on the f/g there's one note in each bank that's only plays at high pressure or not at all, and I've tried "sproinging" them and sliding a dollar bill under each but with no success thus far, so open to other ideas.
Logged

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #38 on: February 19, 2021, 07:52:38 AM »

And if anyone has the 10-second explanation "why it's easier to lower than raise a reed", I'm all ears.
Quick explanation:
1. To sharpen a reed you have to use a file to remove metal from the tip of the reed. It's easy enough for the push reeds because they are the ones which are visible on the top of the reed plate. You just need to support the reed with a thin shim while you're doing it. To sharpen the underneath pull reeds is slightly more tricky because you can't immediately get to the reed to (a) support the tip and (b) file the tip. You need to use a reed lifter to do this and there is a definite skill to be learned to work the reed lifter to bring the tip up through the reed plate slot.

2. To flatten a reed you have to remove metal with a file or scraper/scratcher from the belly of the reed, normally about 2/3 to 3/4 the way along the length of the reed towards the rivet end.  Again, the push reeds are easy - just support the reed tongue with a shim while you are doing it. The underneath pull reeds can be scratched just by lifting the valve slightly and employing the scratcher directly on the reed tongue, working against the inherent springiness of the reed. One or two linear scratches from the 2/3 point to the rivet end will flatten the reed by a cent or two at a time. So long as you are careful and don't use too much pressure, you don't need to lift the reed or support the reed tongue with a shim - and that is why it is easier to flatten reeds rather than sharpen them.

You might find these videos instructive.
https://www.youtube.com/watch?v=rdap-lYsKbw
https://www.youtube.com/watch?v=xy8dizq8Tks

... I'm using Instuner so it has five little lines between each half-step, and the "M+" bank reliably runs 2-3 lines sharp (so up to a quarter-step sharp), while the "M" bank runs 0.5 to 1 line sharp....

That sort of tuning device is OK for tuning guitar strings, but nowhere near precise enough for tuning reeds. You need a tuner which will read at least to the nearest cent. (A cent is one hundredth part of a semitone), so your 'five little lines' are each equivalent to 20 cents. Not really good enough for tuning reeds, where even a couple of cents difference can make a noticeable impact on the tremolo rate or the tuning of octaves and other intervals along the reed bank row.

And on the f/g there's one note in each bank that's only plays at high pressure or not at all, and I've tried "sproinging" them and sliding a dollar bill under each but with no success thus far, so open to other ideas.

First, check all the valves are working - lying flat against the reed plate and not curled or bent. Replace if necessary.

If the valves are all OK, the reed problem then is almost certainly due to the reed tip gap above the reed plate being incorrectly set. In summary, if it is too high, the reed will be slow to start, probably sound loud and breathy, and needing greater bellows pressure to start, or may not sound at all. If it is too low, the sound may be weak and variable in pitch as the bellows pressure changes. If the reed tip gap is very small, the reed will 'choke off' and again, not sound at all.

Adjusting the reed tip gap involves very carefully using a reed lifter or pointy thing like a cocktail stick to open up or close the gap, by bending the reed one way or the other against its springiness. There is a sweet spot where each reed performs at its best, and the difference in the tip opening between good and bad is tiny, often not enough to be seen by eye. Nor is it something which can be reliably measured; each reed behaves slightly differently. Some people will tell you that the reed tip gap needs to be the same as the thickness of the reed itself. While this may be a rough rule of thumb, in my experience it is just an approximate guide. As before, every reed behaves differently.

Adjusting the reed tip gap takes a lot of patience, experience, and care to get it just right, and while learning, the risk of overdoing it and ruining a reed is always present. Be very careful if you try doing this.

Adjusting the opening also affects the tuning, so if you have to alter the tip gap, you may well need to retune the reed. Using excess pressure while tuning the reed can also affect the tip gap, so tuning and adjustment can be a reiterative process.

Now you know why professional reed technicians charge so much for their work. 
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

TapTheForwardAssist

  • Member
  • *
  • Offline Offline
  • Posts: 45
Re: Converted my "toy accordion" melodeon to single voice; next steps?
« Reply #39 on: February 19, 2021, 01:14:49 PM »

For tuners, are there any phone app tuners that are precise enough?

I also have ClearTune on my iPhone, which goes down to 0.1hz of accuracy, so would that suffice? I also have a Peterson Tuning Pickup (basically a clamp with a transducer and cord that plugs into my phone) so I can pick up the vibrations of the instrument without ambient noise.
Logged
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal