Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: Lightweight 2 row DG  (Read 7501 times)

0 Members and 1 Guest are viewing this topic.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lightweight 2 row DG
« Reply #40 on: March 26, 2021, 03:11:27 PM »

I’m a Dino fan, but the Carnival or Oakwood, rather than Blck Pearl. I think they are v competitive compared to Castas. You can see stopped Carnivals and even Oakwood here.
https://squeezeboxes.co.uk/collections/melodeon
(The Dino Oakwood seem to have disappeared..hmm)

Thanks, Roger. Yes, I'm certainly looking at those. Do you think "hand finished" reeds are worth the considerable additional cost over factory-made reeds? What benefit do they actually bring?

I think you can only decide on that after you have tried both.  As has been mentioned earlier Saltarelle reed quality has in the past been quite variable.  When I was at your stage of learning I started with a black Hohner Erica which I wish I still had.   After less than a year I traded it for a new Carnival 3,  I was convinced by three things - the third voice, bass stops, and the wood finish.   It was another 6 months before my playing improved to the point where I could tell that the reed response of the Carnival was poorer than the Hohner! At that point I traded the Carnival for a second hand Saltarelle Berry.  On paper it had the same factory quality reeds, but it played like a dream compared with the Carnival.  I played the Berry happily for several years before deciding that I needed some extra notes and moved to a 2.5 row.   

That was all in the late 1990s and early 2000 and reed manufacture has moved on, and Saltarelle have revised many of their models, but the principle remains the same.  Don't be in a rush to upgrade at an early stage, because in a few months your skills will develop and you may prefer something different.  And try before you buy.  Any decent dealer or retailer will allow you an approval period, and in the not too distant future you should be able to meet a private seller for a trial.

Finally don't write off your pokerwork.  Get it tuned - Hohner factory tuning is poor, the keyboard can be improved and you can get a thirds stop fitted.  I'm now back to playing a Hohner and a Castagnari, and the Hohner is the instrument I pick up first when I'm at home!
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Lightweight 2 row DG
« Reply #41 on: March 26, 2021, 03:29:17 PM »

Thanks, Theo. Your advice is greatly appreciated.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Lightweight 2 row DG
« Reply #42 on: March 26, 2021, 03:51:23 PM »

Thanks, Theo. Your advice is greatly appreciated.

Another vote from me for Theo's advice. It is spot on.
I play mainly on Castagnari instruments but I also have a black Hohner Erica for when I want that real traditional English sound.
If you manage to find a good German-built D/G Hohner Pokerwork or Erica, grab it! And don't let it go.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Jesse Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 761
  • Buffalo, NY, USA
Re: Lightweight 2 row DG
« Reply #43 on: March 26, 2021, 04:07:35 PM »

If you manage to find a good German-built D/G Hohner Pokerwork or Erica, grab it! And don't let it go.

I bought a second one because I love the Pokerwork sound so much. They are hard to find in D/G in the States, and they aren't making them anymore, so I figured it'd be good to have a backup. (Or a nice box for home and the slightly more battered one for playing out.)

The Pokerwork is perhaps not as versatile as some melodeons, but it does the thing it does better than any other box IMO.
Logged
Hohner Pokerwork D/G (x2!), Hohner one row four stops in D and C, Hohner Presswood C/F.

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Lightweight 2 row DG
« Reply #44 on: March 26, 2021, 04:20:48 PM »

it does the thing it does better than any other box IMO.

Spot on!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Lightweight 2 row DG
« Reply #45 on: March 26, 2021, 04:24:34 PM »

Thanks, Theo. Your advice is greatly appreciated.

Another vote from me for Theo's advice. It is spot on.
I play mainly on Castagnari instruments but I also have a black Hohner Erica for when I want that real traditional English sound.
If you manage to find a good German-built D/G Hohner Pokerwork or Erica, grab it! And don't let it go.

I do have a German-made Pokerwork, Steve. Maybe the answer is to get that tuned drier and the fingerboard sorted and see if it then appeals to me more.
« Last Edit: March 26, 2021, 04:27:33 PM by Chris Marriott »
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Lightweight 2 row DG
« Reply #46 on: March 26, 2021, 06:12:18 PM »

I do have a German-made Pokerwork, Steve. Maybe the answer is to get that tuned drier and the fingerboard sorted and see if it then appeals to me more.

There you go then - you are over half-way there.  ;)

It's definitely worth de-clacking by refacing the pallets, and getting it retuned to a less strident tremolo. More akin to the 1930s boxes is nice, and Viennese ('Dedic') tuned will make it sound in tune with the basses and chords.

Some people like the buttons un-tamed, as in the original, but many others like the button travel limited, so that the buttons and your fingers don't disappear down mine shafts. It's a personal thing.

Overall, a well refurbished, set-up and tuned Pokerwork or Erica is a great box.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Lightweight 2 row DG
« Reply #47 on: March 26, 2021, 06:15:57 PM »

Overall, a well refurbished, set-up and tuned Pokerwork or Erica is a great box.

A well set-up Pokerwork is a different instrument and a real pleasure to play, compared to the the ex-factory box.
And it is light!!!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Lightweight 2 row DG
« Reply #48 on: March 26, 2021, 06:27:44 PM »


Also agree with Theo. Somehow Hohner really hit the sweet spot with some of their boxes. They are lightweight and some actually have very good keyboards. And also there is something about the reeds which surpasseth all understanding.
In answer to your question re handmade reeds for a Dino. I think the chassis/keyboard is great (they are built like a little tank) but the factory fitted reeds aren’t always that marvellous. Having said that, I personally think the price of a Dino with (say) Binci reeds is ridiculous (although I think the price of Castas is ridiculous too). I work on top of the range PAs and the price is not dissimilar, yet a PA has so much more going on/more reeds etc  and so the price of some melodeons is beyond me. But that is a personal hang-up and nobody on here will share it, and I’m sure someone will be along to explain the prices (actually I do get it, but I still think the prices are daft...which is why I advocate Dinos.. cos they tend to be competitively priced). I know others will disagree, so I stress it’s my personal view.
Note: I bought my Dino from The Music Room, which has sort of morphed into Squeezeboxes. ‘Factory fitted reeds' is a bit misleading. I believe their would buy the boxes reedless and fit/tune the reeds in the UK, so they would actually be selecting the reeds, if you think about it. As far as I know, Paul Flannery used to do their Reed work (not sure...but he might still be).
« Last Edit: March 26, 2021, 06:33:06 PM by RogerT »
Logged

Chris Marriott

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1048
Re: Lightweight 2 row DG
« Reply #49 on: March 26, 2021, 06:55:20 PM »

Thanks, Roger. That's very helpful.
Logged
Chris

Castagnari Mory, English Concertina and Piano Accordion.

DCB

  • Member
  • *
  • Offline Offline
  • Posts: 18
  • Morris: Castagnari Tommy D/G, Giordy D/G
Re: Lightweight 2 row DG
« Reply #50 on: March 26, 2021, 07:07:47 PM »

My Tommy has served me very well for 25 years now playing Morris and in Irish sessions, but if you want to have a bass stop then the Castagnari Marie Nicole that Pete's announced could fit the bill:
https://www.facebook.com/groups/301716979854351/permalink/5806273666065294
Logged
Castagnari Tommy D/G, Castagnari Giordy D/G, Dino Baffetti Black Pearl D/G, and a number of other elderly boxes

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Lightweight 2 row DG
« Reply #51 on: March 26, 2021, 07:16:59 PM »

Some people like the buttons un-tamed, as in the original, but many others like the button travel limited, so that the buttons and your fingers don't disappear down mine shafts. It's a personal thing.

Or plump holes.....Steve giving away his early career day job there!
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Lightweight 2 row DG
« Reply #52 on: March 26, 2021, 07:24:05 PM »


I personally think the price of a Dino with (say) Binci reeds is ridiculous (although I think the price of Castas is ridiculous too). I work on top of the range PAs and the price is not dissimilar, yet a PA has so much more going on/more reeds etc  and so the price of some melodeons is beyond me. But that is a personal hang-up and nobody on here will share it, ).

I, at least, agree with you, Roger.  I'm probably in a very, VERY small minority when I say that I'm not particularly fond of the typical "Casta" sound, and the few Castas I've played I've found uncomfortable and - well, I suppose a bit awkward and uncomfortable. That's not to say they're not very well made instruments - they just don't suit me.  It's a bit like cars, I guess - the car from my past I miss most was by no means the most expensive or most "sophisticated" one I've ever owned, but the one that was the most fun to drive (an MGB, fwiw).   Having said that,  a Dino Bafetti BPIII I did some work on for a friend was a cracking little box - but would I pay £1600 or so for one? Probably not........
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Helena Handcart

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2452
  • Saltarelle Nell
Re: Lightweight 2 row DG
« Reply #53 on: March 26, 2021, 07:52:13 PM »

I'm probably in a very, VERY small minority when I say that I'm not particularly fond of the typical "Casta" sound

Me too Graham, I much prefer my little family of Saltarelles. I've tried Castas from time to time - even thought it was love on occasion but I keep going back to my lovely old Salties.
Logged
Saltarelle Le Romané  | Saltarelle Nuage | Oakwood | various elderly Hohners

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Lightweight 2 row DG
« Reply #54 on: March 26, 2021, 08:02:28 PM »

Yep. I like Salties too. My Nuage delivers every time.

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Lightweight 2 row DG
« Reply #55 on: March 26, 2021, 08:07:25 PM »

I bought a Tommy at a festival after looking at ~ a dozen trade stands. It was the only thing that spoke without me having to squeeze like anything to get a sound.
After a couple of years, I spent a great morning trying a herd of  about 10 Castagnaris, Loffets, Hohners and possibly a Saltarlle too.
That was the day I discovered I had 'Casta Hands'. My fingers fell to the buttons better than any of the rest, particularly important with small hands like me.
They seem to fit me, I love their sound and their overall feel.
I like my Castagnaris, now having developed my own herd  (:)

Like Chris I used to really not like Hohners.
I disliked the ability to loose my fingers down the holes in the keyboard and the fact I had to really push or pull to get a sound out of them.
At Sidmouth I met a friend who had a Hohner Club that had been renovated.
The difference was incredible. My fingers didn't get lost down the holes and it spoke really quickly.
I now have twins called Erika!
I love the sound of their reeds, and after renovating work really well.
I too advise you to get your Pokerwork renovated, the difference will be great.

Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Lightweight 2 row DG
« Reply #56 on: March 26, 2021, 09:37:57 PM »

It's a 10 minute job requiring nothing more than some cardboard and sticky tape to sort the buttons out Chris, an 'easy', can't muck it up, DIY job and if button 'drop' causes you a problem with the Pokerwork you have, would be likely to boost your interest in it.   

You can really micro-adjust it to suit.  Having said that......although I do my Pokerwork/Presswood's as a matter of course, when I pick up one that hasn't been done, a year in to playing, I must be playing "lighter" as I don't seem to find it as noticeable as I did when I started 'cranking' away.

Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Lightweight 2 row DG
« Reply #57 on: March 26, 2021, 10:56:54 PM »

I have to disagree stuffing the cardboard. It’s a quick  job agreed,  but if you put in enough to properly limit the button travel it make it very difficult to remove the keyboard again, and it gives a spongy and imprecise feel to the buttons. 
A much more effective method was devised by the late Roger Morse of The Button Box which I have used successfully many times.  In fact I’ve just sent a box back to its owner with cardboard packing replaced with this method and he is delighted with the improvement. 
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

playandteach

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3526
  • Currently a music teacher in a high school.
Re: Lightweight 2 row DG
« Reply #58 on: March 26, 2021, 11:10:04 PM »

I'm also not a fan of cardboard packing and have found it spongy and uneven. Glad to hear that I'm not alone in that.
Logged
Serafini R2D2 GC, Serafini GC accs 18 bass

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Lightweight 2 row DG
« Reply #59 on: March 26, 2021, 11:46:41 PM »

Theo, explain for my benefit where people are putting/stuffing cardboard that makes it difficult to remove the keyboard or be makes it 'spongy' in operation ? 

I utilise 300 GSM Art card-stock, cut into strips - approx 8mm for the bottom ones & 5mm for top couple and layered & taped to provide a stepped finish to accommodate the different pitches of the front and rear levers.  It isn't spongy as it is as probably as dense as wood when in place.  It doesn't interfere in any way with the fitting or removal of the fingerboard either as it is contained / slotted back beneath the rear most part of the levers as per the timber fillet in Lester's Hot Rod process?

It's no different - in my experience - to cutting a wooden 'batten' to support the levers, which I have done ( and discarded in favour of the stepped card ) , as it was much easier to fashion with a craft knife and fine tune to the individual Box assy. It is probably marginally lighter, albeit not sufficient to notice. 

I have no doubt the wood batten is good......I am just not sure that properly fashioned card stock ( ie not corrugated card"board" ) is a bad option.

Logged
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal