Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Castagnari Bass end share the same reeds?  (Read 2123 times)

0 Members and 1 Guest are viewing this topic.

Nigel.H

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 586
Re: Castagnari Bass end share the same reeds?
« Reply #20 on: December 13, 2021, 02:24:41 PM »

Specifically pertaining (possibly ? ) to the Dony, is that fact that the blocks on the older - and possibly newer versions ? did not have a bottom wooden plate ? The end of the reed plate sit's directly on the Fondo, to help reduce the size of the instrument overall.

On the Matris - which is a larger, full bodied model, the bass/chord blocks are all internally fashioned/baffled inside each aperture to direct air to the individual tongues, which other smaller/lesser models may not be? Also they are all 'lacquered/varnished' internally, presumably to reduce any absorption of pressure by bare wood?  Again, other models may/may not be treated the same during construction?
 
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Castagnari Bass end share the same reeds?
« Reply #21 on: December 13, 2021, 02:51:39 PM »

Ah.... I've heard the bass ends on the Pariselle are somehow made to get more air through the reeds. Sounds vaguely similar.
As a complete numpty when it comes to 'inside a box' I can only go by other comments from threads
Q
Definitely a driver absolutely not a mechanic  ;)
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

benammiswift

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 158
  • Squeezing for Derbyshire
    • benammiswift.co.uk
Re: Castagnari Bass end share the same reeds?
« Reply #22 on: January 26, 2022, 09:51:55 PM »

With Castagnari It’s only the smaller compact models that have reed sharing between chord and bass. 
And yes Chris a Stradella bass has one reed for each note (repeated for each octave) and the chords are created by the mechanism.

It depends. The I of the chord note is shared with the bass. so there's 6 holes but only 5 reeds as the chamber for that chord root note is a deep chamber with 2 holes at least on my handry anyway. I'm not sure about the Mas actually. It makes a difference when you're using the freebass on the handry since you can access the same note but you don't get the pair effect.

It's an odd layout for sure

Logged
Castagnari Handry 18
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal