Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Fun, Annual Melodeon Build Competition?  (Read 2954 times)

0 Members and 1 Guest are viewing this topic.

Trevor Henderson

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
  • Tender Buttons
Re: Fun, Annual Melodeon Build Competition?
« Reply #20 on: January 01, 2022, 02:46:55 PM »

Reeds -that’s the real challenge!
I think you could use spring bronze weather stripping for the reed tongues (I’ve got lots of it for window and door restoration) I wonder if you could use hardwood for the reed plate. Then you could use a small screw instead of a rivet. Making precise square holes in wood or aluminium is not going to be easy. You could theoretically glue up a wooden Reed plate out of tiny parts that you make with your tiny saws and clamp with your tiny clamps.
Logged

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Fun, Annual Melodeon Build Competition?
« Reply #21 on: January 01, 2022, 04:21:54 PM »

Reeds -that’s the real challenge!
 Making precise square holes in wood or aluminium is not going to be easy.

Use a square drill .....???...... ;D

Happy New Year!
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Fun, Annual Melodeon Build Competition?
« Reply #22 on: January 01, 2022, 04:30:36 PM »

Use a square drill ..... ??? ...... ;D
Yep, a morticing machine is the answer!
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Fun, Annual Melodeon Build Competition?
« Reply #23 on: January 01, 2022, 06:39:36 PM »

Or laser cutter.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Fun, Annual Melodeon Build Competition?
« Reply #24 on: January 01, 2022, 09:40:36 PM »

Reeds -that’s the real challenge!
 Making precise square holes in wood or aluminium is not going to be easy.

Use a square drill .....???...... ;D

Happy New Year!

"Square drills" are things. I can think of at least two types. Having said that, I would probably use a square hole punch for ali [maybe that should be "possibly". Depends on the thickness].

https://www.youtube.com/watch?v=rjckF0-VeGI
« Last Edit: January 01, 2022, 09:59:30 PM by Tone Dumb Greg »
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Trevor Henderson

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
  • Tender Buttons
Re: Fun, Annual Melodeon Build Competition?
« Reply #25 on: January 02, 2022, 04:58:18 PM »

Ok i made a reed with cherry reed plate and spring bronze for the tongue. I used a glue up method for the plate to get a clean rectangular hole. The reed was from some door weatherstripping I had about. It was actually a lot thinner than I had imagined and I was able to cut it with scissors.
Surprisingly it worked even though the bronze was too thin. I registered a clear G1 on the tuner. It couldn’t handle much air pressure being so thin. I think a better household source for reed material would be the spring from a wind up toy or clock.
Logged

Trevor Henderson

  • Good talker
  • **
  • Offline Offline
  • Posts: 55
  • Tender Buttons
Re: Fun, Annual Melodeon Build Competition?
« Reply #26 on: January 02, 2022, 05:40:36 PM »

Gluing up the reed plate:
Logged

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Fun, Annual Melodeon Build Competition?
« Reply #27 on: January 02, 2022, 08:07:46 PM »

I read somewhere that a self-taught Australian concertina maker (perhaps Pierre Hooft?) used old clock springs to make reeds.  I'm pretty sure that the shaping, mounting, and tuning of such material would be beyond me.  Hooft was a professional silversmith, so he had a rather more developed metalworking skill-set than do I.
Logged
Charter Member Presumpscot and Fore River Accordion Club

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Fun, Annual Melodeon Build Competition?
« Reply #28 on: January 02, 2022, 09:59:30 PM »

You can buy strips of spring steel on eBay. I use it to make various tuning tools.

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Fun, Annual Melodeon Build Competition?
« Reply #29 on: January 02, 2022, 11:26:50 PM »

You can buy strips of spring steel on eBay. I use it to make various tuning tools.
Steel strapping bands from pallets of bricks or fence posts. Brass sheet/strip from model shops.
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Fun, Annual Melodeon Build Competition?
« Reply #30 on: January 03, 2022, 12:21:04 AM »

You can buy strips of spring steel on eBay. I use it to make various tuning tools.

The stuff I found would work out more expensive than buying reeds from Charlie.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal