Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Rewaxing 4-stop Hohner.  (Read 2530 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Rewaxing 4-stop Hohner.
« Reply #20 on: June 03, 2022, 11:17:50 AM »

My method is to remove all the reeds and then place it over a pan of boiling water, reed-blocks facing into the pan..
This softens the glue and the blocks come out easily.
It's worth blocking off the rest of the treble end to keep the steam away from the other glued parts, otherwise the whole thing could fall apart.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Peadar

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2039
Re: Rewaxing 4-stop Hohner.
« Reply #21 on: June 03, 2022, 12:29:01 PM »

I think I'm going to try that.
Sometime ago I bought a C/C# from a seller in Edinburgh that turned out to quie literally have had the reed blocks smashed. Obviously the e-bay seller was a con artist but i didn't return the box because I had bought it to see what it's tuning was like ( I have found a tendency for old boxes sourced in Edinburgh to be High Pitch tuned whereas ones coming from Glasgow and Aberdeen tend to be A 435 but my sample is statistically insignificant).

Anyway... I think I'll try Rees method possibly using an old mess tin...I rather like the idea of re-fittng this yoke with removable reed blocks so I can have a German Type 4 bass D/G. ( Thread de-railment not intended)
Logged

Ed Rennie

  • Good talker
  • **
  • Offline Offline
  • Posts: 82
Re: Rewaxing 4-stop Hohner.
« Reply #22 on: February 27, 2025, 05:16:35 PM »

My method is to remove all the reeds and then place it over a pan of boiling water, reed-blocks facing into the pan..
This softens the glue and the blocks come out easily.
It's worth blocking off the rest of the treble end to keep the steam away from the other glued parts, otherwise the whole thing could fall apart.
As luck would have it, one of my students brought in an old 4 stop which a friend had found in a house in that London which they were just about to pull down. I said I'd see if I could tart it up a bit. A quick gawp inside revealed some flaky wax and one loose reed. Life will be easier if the blocks were removed I guess.
Now, might a hot air gun, on a low setting do the same job, or is the moisture a key ingredient. I understand hot hide glue melts at around 6o C
Logged
There's a lot more goodies in the pipeline ...

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Rewaxing 4-stop Hohner.
« Reply #23 on: February 27, 2025, 05:42:42 PM »

It might work, Ed. If no luck with that, try a blowlamp.
That should sort the job out once and for all.  >:E
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Rewaxing 4-stop Hohner.
« Reply #24 on: February 27, 2025, 06:01:08 PM »

A steam cleaner gun may be the ticket. Often comes with hose accessory so you can keep the action local.
Logged
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal