" He put a subsntial effort into trying to extract the rod with zero success. In the end he resorted to applying heat, to try and release it, by means of connecting the terminals of a car battery across it."
I have done this quite a few times.Instruments with brass axels are harder since the brass is so conductive. You have to have cables that are a lot thicker than the axel.
i usually touch the axel for a second and wait a few seconds and repeat. This heats the axel evenly and you don't get hot spots. It it is really bad you may end up having to char things a bit to get it free. If so you will have to rebore to a larger size.
Once i get it to move I quickly chuck a drill to it and get it spinning to keep it from seizing (friction heats the tight spots) and draw it out.