Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Are " Dry " tuned reeds more responsive?  (Read 5315 times)

0 Members and 1 Guest are viewing this topic.

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Are " Dry " tuned reeds more responsive?
« Reply #20 on: May 18, 2023, 08:12:53 AM »

Sorry, mselic.  I may have misinterpreted the meaning of the terms "fire off" and "sounding off".
I assumed Gettabettabox  meant the start of the sound wave, which I referred to as "attack".
My comment queried the response towards the the end of the sound wave, which I referred to as "decay".
I understand the "shape" of an organ note to be opposite to that of a piano note. Piano note "volume" instantaneous as hammer strikes and then fades. Organ note builds as reeds/air column begin to vibrate but stops instantaneously when key release cuts off wind. Is this not the same as for an accordion/melodeon?

Yes, I'd have thought so.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #21 on: May 18, 2023, 08:22:24 AM »

http://forum.melodeon.net/index.php?topic=20754.0
You might find this thread interesting.
That is certainly interesting and very skilled work.
I would not like to try it.
I don't think I sm putting my question over clearly enough.
For example we have two reeds on the reed block.
One is M reed and the other M+ tuned at 25 Cents difference to the M reed ( to be extreme)
When those two reeds are sounded there will be a fast wah wah wah wah etc.( Beating).
This beating takes time.
If however we have two reeds tuned to the exact same frequency there will be no beating, no wah wah wah sound therefore there will be no time factor involved.
Because there is no time factor, would it be fair to say that the dry tuned reed set will respond quicker?
It

I think I know what you are getting at.  The beating, I suspect, does take time to generate.
Both reeds start simultaneously (assuming gaps/inertia are the same - Venturi effect - Bernoulli etc.) but the beating is subsequently generated.  My understanding is that the perception of tremolo is a caused by a variance in amplitude.  I remember watching reeds beat at very low beat rates and you could see the amplitude variation as the reeds reacted to each other. The beating is an overlay effect generated from the interacting pressure waveforms. So in theory you would expect it to take time to generate.

Is it perceivable though? 

I suspect that we hear a mix of the base frequencies first and then the generated beat.

I may be wrong  👀



Update: Its really interesting. I have just tried one of my boxes with a very low beat rate and you can hear the first beat being generated on the back of the reeds coming in.  It’s really noticeable on low frequencies with low beat rates. I suspect that there is a finite time for the first beat to be generated dependant on frequency and offset. Thinking about it it’s pretty logical.  Fascinating … thanks Peter
« Last Edit: May 18, 2023, 10:13:05 AM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Are " Dry " tuned reeds more responsive?
« Reply #22 on: May 18, 2023, 10:08:09 AM »

If this were the case then switching from two reeds (MM) to
one reed (M) - the one reed set would suddenly be much more
 responsive.    On the other hand, going from "ordinary" reeds to high quality hand made is a very obvious difference.
The reed starts immediatly and you get twice the playing time on one "bellows" of air. Thats been my experience anyway 🙂.
Ive always thought the beating effect was caused by the sound waves interfering with eachother - I may be wrong.🤔
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Are " Dry " tuned reeds more responsive?
« Reply #23 on: May 18, 2023, 10:12:37 AM »

@ John Burks.
Yes, you have understood my question entirely by saying that the the beating is an overlay effect generated from the interacting pressures that create a waveform...so in theory you would expect it to take time to generate.
This is exactly my point.
The reason my question occured is because I have just dry tuned a two row box and I have noticed two distinct changes.
1. It is louder ( or appears to be)
2 It is more responsive as I can play faster and I imagine I am using less air because I do not need to pump the bellows so hard.
This being the case, the box is more efficient which prompts me to pose my question.
You ask " Is it Perceivable ?"
For my two point above ..my answer is " yes ".
Thats just my take and what I found and just wondered if any body else came up with the same conclusion but so far " No ".
Thats okay though.
It could be my imagination.
Bit like when you spend half the day cleaning5 your car it runs better!


Logged

Winston Smith

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4066
  • AKA Edward Jennings
    • "Our Luxor B&B" Luxor life, slice by slice.
Re: Are " Dry " tuned reeds more responsive?
« Reply #24 on: May 18, 2023, 10:23:32 AM »

"stops instantaneously when key release cuts off wind. Is this not the same as for an accordion/melodeon?"

Not necessarily. Lower note reeds sometimes tend to 'overrun' simply because of momentum, and certainly more so when a reed tongue is heavily weighted. A pipe organ cannot have this characteristic but a reed organ could, perhaps.
Logged
At last, broken and resigned to accept conformity.
Oh, how I LOVE Big Brother!

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #25 on: May 18, 2023, 10:37:17 AM »

@ John Burks.
Yes, you have understood my question entirely by saying that the the beating is an overlay effect generated from the interacting pressures that create a waveform...so in theory you would expect it to take time to generate.
This is exactly my point.
The reason my question occured is because I have just dry tuned a two row box and I have noticed two distinct changes.
1. It is louder ( or appears to be)
2 It is more responsive as I can play faster and I imagine I am using less air because I do not need to pump the bellows so hard.
This being the case, the box is more efficient which prompts me to pose my question.
You ask " Is it Perceivable ?"
For my two point above ..my answer is " yes ".
Thats just my take and what I found and just wondered if any body else came up with the same conclusion but so far " No ".
Thats okay though.
It could be my imagination.
Bit like when you spend half the day cleaning5 your car it runs better!

Hi Peter,  Interesting. Car analogy is good by the way. I’m just about to go out and wash mine.

Over the months I have reset most of mine to be on the dryer side but they do still have low beat rates so I don’t have anything to compare too.. They do have a slight “lag” feel to them though on low frequencies as the beat generates. You can sense it. I have also changed reeds at the same time though and have focused on gapping. So comparisons are difficult.

Pleased to hear that your box is quicker though ….. a win!

Still working on mine (:)
« Last Edit: May 18, 2023, 10:47:57 AM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

Andy Next Tune

  • aka Andy Wooles
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1127
  • Melodeon with Accidentals? Make a PI Claim!!!
    • www.shavethedonkey.co.uk
Re: Are " Dry " tuned reeds more responsive?
« Reply #26 on: May 18, 2023, 10:54:37 AM »

A sounding reed produces a waveform of varying amplitude, with the distance between peaks (wave length) determined by the tuning (frequency) of the reed.
Two reeds sounding - each produces a separate waveform which superimpose on each other as they propagate.
Depending upon the relative tuning of the reeds, some pressure peaks in the waves may coincide and their pressure/amplitude are added. Similarly a peak and trough may coincide and cancel each other out.

It is our ear and brain which interprets these interacting two waveforms as a pulsing note. The peaks and troughs of the 'pulse' are there as soon as the two waveforms are there, i.e. as soon as the two reeds sound. A good electronic tuner recognises it as two waves and can determine their frequencies.

All sound generation is dependent upon starting something vibrating and so will have an attack time - piano, organ, violin, musical saw, etc etc. But the speed of it will vary, fast-piano, slow- organ, but none produces a 'note' instantly.

When the two reeds are mounted in a melodeon, then other effects, such as resonance, also come into play. These help to the answer to the question whether the waveforms from two identically tuned reeds can cancel each other out - in theory- Yes, in practice - no. But that is beyond my 'A' level physics pay grade!
Logged
Andy, from the now ex-County Palatine of Cheshire

Caring for a European community of melodeons from France, Italy, Germany, Wales and Suffolk!

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Are " Dry " tuned reeds more responsive?
« Reply #27 on: May 18, 2023, 02:32:18 PM »

A sounding reed produces a waveform of varying amplitude, with the distance between peaks (wave length) determined by the tuning (frequency) of the reed.
Two reeds sounding - each produces a separate waveform which superimpose on each other as they propagate.
Depending upon the relative tuning of the reeds, some pressure peaks in the waves may coincide and their pressure/amplitude are added. Similarly a peak and trough may coincide and cancel each other out.

It is our ear and brain which interprets these interacting two waveforms as a pulsing note. The peaks and troughs of the 'pulse' are there as soon as the two waveforms are there, i.e. as soon as the two reeds sound. A good electronic tuner recognises it as two waves and can determine their frequencies.

All sound generation is dependent upon starting something vibrating and so will have an attack time - piano, organ, violin, musical saw, etc etc. But the speed of it will vary, fast-piano, slow- organ, but none produces a 'note' instantly.

When the two reeds are mounted in a melodeon, then other effects, such as resonance, also come into play. These help to the answer to the question whether the waveforms from two identically tuned reeds can cancel each other out - in theory- Yes, in practice - no. But that is beyond my 'A' level physics pay grade!
When the peaks and troughs of two wave forms generated from two reeds vibrating together coincide to produce one wave form is there then less pressure?
Logged

tirpous

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1403
Re: Are " Dry " tuned reeds more responsive?
« Reply #28 on: May 18, 2023, 03:15:09 PM »

Quote
When the peaks and troughs of two wave forms generated from two reeds vibrating together coincide to produce one wave form is there then less pressure?

The amplitude of the combined waveform varies at the beat rate.  See first figure on this page: https://www.animations.physics.unsw.edu.au/jw/beats.htm .  (there are interesting sound samples lower down)

Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #29 on: May 18, 2023, 05:08:49 PM »

Just out of interest here are a couple of videos showing reeds beating.  The first shows a single valve/reed the second (bit blurred) shows both valves/reeds.  You can see the beat initiating and what I call "acoustic coupling" (probably the wrong term) but the reeds are being affected by the cycling pressure generated by the offset which is about 2Hz and 1.5Hz . The reeds actually change amplitude in line with the beat as does the airflow. They do this in unison.

Please excuse the quality.

Reed Beating 1 by John Burks, on Flickr

Reed Beating 2 by John Burks, on Flickr


« Last Edit: May 18, 2023, 05:39:26 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Are " Dry " tuned reeds more responsive?
« Reply #30 on: May 18, 2023, 05:13:40 PM »

I tuned one of my many Hohners to a dry tuning(for a change) and found it much better suited to fast tunes - mainly I think because of the clarity compared to a wet sound . Limiting button travel,new pallet felt, airtight bellows etc all helped of course but it does seem "faster" to play.
Logged

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Are " Dry " tuned reeds more responsive?
« Reply #31 on: May 18, 2023, 06:36:48 PM »

With going from wet to dry it has been the same here. I think it's a perception issue due mostly to the effect of clarity of sound, especially if using ornamentation.
I also would say that the response is quicker, but then this is likely the result of having given the box some attention and setting the reeds well!
« Last Edit: May 18, 2023, 06:38:20 PM by gettabettabox »
Logged

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Are " Dry " tuned reeds more responsive?
« Reply #32 on: May 18, 2023, 10:03:39 PM »

PS. There's a free android app on Google Play Store called Function Generator which is a 2 channel tone generator.
With this you can manually  edit each frequency and find the speed of vibrato -  eg 440hz on 1 + 444hz on 2 gives you about 4 beats per min.
File size is under 3mb.
Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Are " Dry " tuned reeds more responsive?
« Reply #33 on: May 18, 2023, 11:24:56 PM »

Just out of interest here are a couple of videos showing reeds beating.  The first shows a single valve/reed the second (bit blurred) shows both valves/reeds.  You can see the beat initiating and what I call "acoustic coupling" (probably the wrong term) but the reeds are being affected by the cycling pressure generated by the offset which is about 2Hz and 1.5Hz . The reeds actually change amplitude in line with the beat as does the airflow. They do this in unison.

Please excuse the quality.

Reed Beating 1 by John Burks, on Flickr

Reed Beating 2 by John Burks, on Flickr
Ahhh Voila!
When the two reeds pitch in unison there is an increase in amplitude and the airflow is also altered.
This is exactly what I experienced and had to ask the question.

Logged

Peter Cane

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 204
Re: Are " Dry " tuned reeds more responsive?
« Reply #34 on: May 18, 2023, 11:33:32 PM »

Quote
When the peaks and troughs of two wave forms generated from two reeds vibrating together coincide to produce one wave form is there then less pressure?

The amplitude of the combined waveform varies at the beat rate.  See first figure on this page: https://www.animations.physics.unsw.edu.au/jw/beats.htm .  (there are interesting sound samples lower down)
Thank you very much for this input.
I find it most interesting.
It seems to be a fact to me now that the amplitude increases as the wave forms from two reeds off pitch are brought to pitch.
Can you conclude that there is also variance of air flow?
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #35 on: May 19, 2023, 02:05:28 PM »

A sounding reed produces a waveform of varying amplitude, with the distance between peaks (wave length) determined by the tuning (frequency) of the reed.
Two reeds sounding - each produces a separate waveform which superimpose on each other as they propagate.
Depending upon the relative tuning of the reeds, some pressure peaks in the waves may coincide and their pressure/amplitude are added. Similarly a peak and trough may coincide and cancel each other out.

It is our ear and brain which interprets these interacting two waveforms as a pulsing note. The peaks and troughs of the 'pulse' are there as soon as the two waveforms are there, i.e. as soon as the two reeds sound. A good electronic tuner recognises it as two waves and can determine their frequencies.

All sound generation is dependent upon starting something vibrating and so will have an attack time - piano, organ, violin, musical saw, etc etc. But the speed of it will vary, fast-piano, slow- organ, but none produces a 'note' instantly.

When the two reeds are mounted in a melodeon, then other effects, such as resonance, also come into play. These help to the answer to the question whether the waveforms from two identically tuned reeds can cancel each other out - in theory- Yes, in practice - no. But that is beyond my 'A' level physics pay grade!

The above makes complete sense.   Visually (conceptually) I can see the two slightly offset combined frequencies defining the beat.  What has always confused me though is why the reeds themselves pulse.  If you watch them, the reed amplitude pulses.  As mentioned in my previous post I have always suspected that this is something to do with acoustic coupling i.e. both reeds are affected by their own combined beat. But I am now not sure. 

This morning I did a little experiment to try to see how the reeds pulse.  Here is a video:

IMG_1266 by John Burks, on Flickr

and a YouTube link if preferred:  https://www.youtube.com/shorts/jUPjy2bMubY

Note: Excuse the quality as I had to increase the saturation a lot to define the reed edges.

If you watch carefully when the second note sounds (G) you can see both reeds oscillate (top and bottom in video) and then they start to pulse.  If you watch carefully they do work together. ..... but ..... As one decreases amplitude the other increases.  This has surprised me as I thought that they would work in unison i.e both increasing and decreasing at the same time (both pulsing due to pressure changes).  :o

As I say previously my only explanation for the reeds pulsing has been that they are somehow close coupled acoustically.  Seeing them work work together today in opposition i.e. one decreasing as the other increases has now uttlerley confused me.  Surely if the pressure was pulsing within the bellows it would affect them in the same manner?  Here they seem to be fighting one another.  Also notice the slight lag as they follow one another. Does one lead the other?

What is the mechanism?

Any help/insight would be appreciated. 

it's bugging me  :-\

Thanks

John

BTW The note frequencies are A 222-220.2 Hz and G 197.5-196 Hz i.e. about 1.5 Hz offset.




« Last Edit: May 19, 2023, 03:42:25 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Are " Dry " tuned reeds more responsive?
« Reply #36 on: May 19, 2023, 04:06:53 PM »

I think one thing to bear in mind is practical application here.  Despite what's being explored/measured here on a very technical level, if the issue at hand is whether or not a box with dry-tuned reeds plays/responds better (as compared to the very *same* box with a different tuning), I think in *practical terms* the answer is still essentially no.  There are other factors that most certainly make a difference.
Logged
C#/D player

JNM SY

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 227
Re: Are " Dry " tuned reeds more responsive?
« Reply #37 on: May 19, 2023, 04:09:05 PM »

I take it the two reed chambers are totally sealed from eachother.
 I'd be interested to see what effect a small hole connecting reed chambers would have on the beating effect. I suspect it would kill it,
but I'm just guessing.
Logged

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #38 on: May 19, 2023, 04:20:45 PM »

I think one thing to bear in mind is practical application here.  Despite what's being explored/measured here on a very technical level, if the issue at hand is whether or not a box with dry-tuned reeds plays/responds better (as compared to the very *same* box with a different tuning), I think in *practical terms* the answer is still essentially no.  There are other factors that most certainly make a difference.

Hi mselic,  I must admit I'm a bit guilty of hijacking a topic here. 

John
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)

John Burks

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 142
Re: Are " Dry " tuned reeds more responsive?
« Reply #39 on: May 19, 2023, 04:28:24 PM »

I take it the two reed chambers are totally sealed from eachother.
 I'd be interested to see what effect a small hole connecting reed chambers would have on the beating effect. I suspect it would kill it,
but I'm just guessing.

HI SHTUM, good thought.  I will give it a try. The air flow could be cycling between the two chambers excited in some way by the beat.  That would tend to explain it.  Air flow is constant but distribution affected in some way. The unusual thing though is that the valves in note 1 oscillate in unison as total flow pulses but the reeds oscillate in an opposed manner.  Not sure what is going on.
« Last Edit: May 19, 2023, 04:41:00 PM by John Burks »
Logged
Francois Dedenis D/G, Koch Overture G/C , Custom "Picoletta" D/G, Hohner Modell 1 B/C, M Hohner 5A B/E (Phosphor Bronze)
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal