Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Serenellini 213K weakening treble springs and is Bass mechanism.  (Read 977 times)

0 Members and 1 Guest are viewing this topic.

Mike Keen

  • Member
  • *
  • Offline Offline
  • Posts: 15

Hi
I've got two Serenellini 213K (GD and GC). Both boxes are about 20 years old and have been well looked after. Looking inside they are really well made as can be seen by the posted photos. The treble keys are brass bushed, so the keys move smoothly and don't ever stick (so far).

The treble and bass button are MUCH harder to push than my Dino Baffetti Carnival III and I would like to lighter them, also there's not lever to remove the thirds from the basses.

First the spring issue. I've been looking at previous posts (and exchanged emails with Theo - thank you Theo). The options seem to be bend the springs to reduce the preload or fit lighter springs (see photo 1). I'd appreciate any advice. The 213K springs are fairly high tension (see photo) do the "experts" think reducing the preload would work. If not what thickness of spring/tension would they suggest to get it to feel similar to (or possible slightly harder than) the Baffetti.

Regarding the thirds, The third reed (fairly certain) is located on the back of the bass block (furthest from the buttons). Has anyone modified a melodeon with a similar bass layout? Can it be done? I haven't removed the bass block yet to have a look.

One interesting point (I think) is that as far as I can make out the basses play 4 reeds when pushed. (please look at the photos) The chord having two firsts a third and a fifth.  I'm only a recent convert to melodeon (played mandolin for years), but I thought most boxed only played 3 reed. Can someone educate me.

I'm used to fettling mandolins but melodeon are new to me.

Thanks Mike

Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #1 on: August 17, 2023, 06:16:02 PM »

It's going to be tricky to fit a thirds stop with that layout.
It looks as if the thirds are in a line with the higher bass reeds.
To fit a stop you need the thirds on a separate block with spaces between the reedplates so that the spaces on the stop-slide can block off the third reeds.
The only way to do it on your setup is to do away with the adjacent bass reeds and block the holes, that will give you the space you need but you then have a gap in your bass setup.
Hmmmm .......
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #2 on: August 17, 2023, 07:53:46 PM »

Regarding the springs, just adjust the existing ones to lighten the tension. That’s what I regularly do on both the treble and bass ends without any issue or noticeable air loss. You can go surprisingly light without running into reduced compression.

Putting a thirds stop in your box would indeed be tricky. My suggestion would be to leave it as is and either a) tape off the thirds (which means you’ll never have them) or b) learn to only hit the bass note -and leave out the chord - when you don’t want a major chord.
« Last Edit: August 17, 2023, 07:56:06 PM by mselic »
Logged
C#/D player

Mike Keen

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #3 on: August 17, 2023, 09:30:56 PM »

Thanks for the replies.
Regarding how much to bend the springs -it's trial and error I know, but what angle would you suggest for starters? At the moment it's over 90 degrees would bending it to about 60 degrees seem reasonable?
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #4 on: August 17, 2023, 11:13:25 PM »

Thanks for the replies.
Regarding how much to bend the springs -it's trial and error I know, but what angle would you suggest for starters? At the moment it's over 90 degrees would bending it to about 60 degrees seem reasonable?

Yes, try 60 degrees.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

mselic

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1683
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #5 on: August 18, 2023, 03:38:48 AM »

Thanks for the replies.
Regarding how much to bend the springs -it's trial and error I know, but what angle would you suggest for starters? At the moment it's over 90 degrees would bending it to about 60 degrees seem reasonable?

It doesn’t take much to make a difference. Trial and error. Start small and try one out. You don’t have to do them all to see.
Logged
C#/D player

Mike Keen

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #6 on: August 18, 2023, 08:44:30 AM »

I've just measured the button tension for 3 different Italian melodeons - I put it up as a separate post
Logged

Tone Dumb Greg

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 4955
    • Dartmoor Border Morris
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #7 on: August 18, 2023, 11:08:32 AM »

Thanks for the replies.
Regarding how much to bend the springs -it's trial and error I know, but what angle would you suggest for starters? At the moment it's over 90 degrees would bending it to about 60 degrees seem reasonable?

You may find that less is more.

You could try a range of tweaks over a few buttons.

Inside and outside rows may prefer different tweaks.
Logged
Greg Smith
DG/GC Pokerwork, DG 2.4 Saltarelle, pre-war CF Hohner, Hohner 1040 Vienna style, old  BbEb Hohner that needs a lot of work.

ACCORDION, n. An instrument in harmony with the sentiments of an assassin. Ambrose Bierce

Mike Keen

  • Member
  • *
  • Offline Offline
  • Posts: 15
Re: Serenellini 213K weakening treble springs and is Bass mechanism.
« Reply #8 on: August 18, 2023, 11:28:37 AM »

Treble side done. Closed the springs up about 20 degrees. which gave a tension similar to the Baffetti. Thanks for the replies.

Won't have time to do the basses until next week.
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal