Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: HOHNER POKERWORK OR HOHNER ERICA: "THE CHOICE HAS BEEN MADE!"  (Read 19328 times)

0 Members and 1 Guest are viewing this topic.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #20 on: November 23, 2009, 05:14:09 PM »

Mario, you should keep an eye on lespac.com - there is often an Erica G/C or two on there somewhere in Québec.

Like this one: item no. 20273362   or this one: 20171959
« Last Edit: November 23, 2009, 05:16:39 PM by Steve Jones »
Logged

HallelujahAl

  • Guest
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #21 on: November 23, 2009, 06:36:40 PM »

Quote
Mario,

Personally, I'd rather have a Hohner...
AMEN!
Logged

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #22 on: November 24, 2009, 01:13:16 AM »

Hi GA,

Thanks for sharing these interesting observations with us.  Always helpful to get different points of view.   I guess it ALWAYS goes back to to: "There's absolutely nothing that can replace actually trying the accordion itself before buying!".  Then it's always up to each and everyone to figure out what feels right.

UGH!!!!! this is such a hard decision because I have to choose between a Pokerwork and an Erica this week!! (my choice).  My dealer is like accross the country and IF I don't like my Erica...He might accept to exchange (same price) but I'll still have to hassle with spending MORE money for shipping back and forth. :-0 But that's the way it goes.  Just ventilating my frustration! :(

Thanks!

********************************************************
I own a Chinese-made Pokerwork, in D/G, and it's my only box.  I tried a Weltmeister but preferred the tone of the Pokerwork...//
So, for me, I prefer the Pokerwork, but if the Erica was the only one available, I'm sure I'd have worked around the bass fingers issue somehow.



Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #23 on: November 24, 2009, 01:25:27 AM »

Hi Steve!

Good point.  I'll check it out the item numbers.  Plus it may be around the corner, right?!


Thanks Steve.

Mario
*********************************************************

Mario, you should keep an eye on lespac.com - there is often an Erica G/C or two on there somewhere in Québec.

Like this one: item no. 20273362   or this one: 20171959
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
HOHNER POKERWORK OR HOHNER ERICA!
« Reply #24 on: November 24, 2009, 04:33:19 AM »

Since we're on the subject of comparing,  I need to know from Owners of these NEW CHINESE instruments, the following important information:

 I would really need to know IF the NEW Hohner Pokerwork and Erica made in China Buttons still get stuck inside the treble and/or bass keyboards when pushed down?.  (I know that the Pokerwork does not have this problem on the bass side because of the larger buttons but what about the treble side of the Pokerwork?).

 Please don't foget to inform me for the Erica buttons for the treble and bass side.  Have they corrected this problem with having inserted a pad on the bottom of the keys so that the buttons dont  go down far enough to get stuck.  I know this used to be a problem...but maybe it's no longer the case.

I just can't wait to order my Erica OR Pokerwork THIS week!.  I just can't wait any longer.  I've been without an accordion now for just too long...like since 1997!  :||:

Thanks a lot!  (:)
Mario
« Last Edit: November 24, 2009, 04:37:58 AM by callmemario »
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: HOHNER POKERWORK OR HOHNER ERICA!
« Reply #25 on: November 24, 2009, 08:18:59 AM »

I would really need to know IF the NEW Hohner Pokerwork and Erica made in China Buttons still get stuck inside the treble and/or bass keyboards when pushed down?.  (I know that the Pokerwork does not have this problem on the bass side because of the larger buttons but what about the treble side of the Pokerwork?).

 Please don't foget to inform me for the Erica buttons for the treble and bass side.  Have they corrected this problem with having inserted a pad on the bottom of the keys so that the buttons dont  go down far enough to get stuck.  I know this used to be a problem...but maybe it's no longer the case.

The button action on Pokerwork and Erica still seems to me to be exactly the same.  But as far as I am aware buttons getting stuck down was never a problem unless the fingerboard was incorrectly fitted or the button levers had been bent.  What does happen is that the buttons can travel some distance below the top surface of the fingerboard.  Some players find this a problem, others don't. There is a simple fix with a strip of wood behind the fingerboard to limit button movement as show here
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

saguaro_squeezer

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
  • Pokerworks, Crane Duets, Bandoneon
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #26 on: November 24, 2009, 09:27:23 AM »

Mario,

I've got a G/C Pokerwork that I'd sell you pretty cheaply ($300 US).  It's got accidentals and plays reasonably well.  It's not a beauty queen but not horribly ugly.  I got if off ebay and had my local shop freshen it up.  It's all new straps and strap brackets as well.  Not sure if it's what you're looking for.  I'd bought one from another m.net member with low notes and then won this one.  Interesting to try them side by side.
Logged
Rod Wagoner
Tucson, AZ

"How great life is if you just accept the small gifts and don't waste time on wishes." - Clinton "Bubba" Hare, Airheads Beemer Club

"OOP-ACK-THHPT!" - Bill the Cat

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: HOHNER POKERWORK OR HOHNER ERICA!
« Reply #27 on: November 24, 2009, 10:31:48 AM »

... I need to know from Owners of these NEW CHINESE instruments, the following important information:

 I would really need to know IF the NEW Hohner Pokerwork and Erica made in China Buttons still get stuck inside the treble and/or bass keyboards when pushed down?.


When renovating old (and new!) Hohner Ericas and Pokerworks I still tend to put a woven felt pad beneath the keys rather than using the stick method to limit travel, but that's partly because I've got a heap of the stuff in stock.

Interesting that the new Chinese-made Ericas and Pokerworks I've seen lately have a piece of felt beneath the buttons. However, it is so thin as to be virtually inneffectual.

I also notice that the button holes have much sharper edges on the Chinese made Hohners; maybe to discourage players from pushing their fingers too far into the holes. The resultant "mother-in-law's blessing" can make you change your playing style smartly....



(Edited to explain that the phrase "mother-in-law's blessing", where I come from, is that peeling of the skin beside the nail which can sting like hell. Don't know the proper name for such an injury, and there seems to be no google reference to it! I only seem to get the problem when I play Chinese made boxes....or boxes with replacement Chinese-made keyboards with little or no limit to button travel).

Apologies for slight thread drift....




« Last Edit: November 24, 2009, 10:47:43 AM by Malcolm Clapp »
Logged
Tuner/repairer, now retired.

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: HOHNER POKERWORK OR HOHNER ERICA!
« Reply #28 on: November 24, 2009, 03:31:14 PM »

Wow Theo, thanks for the interesting information.  Like
they say: "A picture is worth a thousand words! " ;-)

Mario
*****************************************************

I would really need to know IF the NEW Hohner Pokerwork and Erica made in China Buttons still get stuck inside the treble and/or bass keyboards when pushed down?. 

The button action on Pokerwork and Erica still seems to me to be exactly the same.  But as far as I am aware buttons getting stuck down was never a problem unless the fingerboard was incorrectly fitted or the button levers had been bent.  What does happen is that the buttons can travel some distance below the top surface of the fingerboard.  Some players find this a problem, others don't. There is a simple fix with a strip of wood behind the fingerboard to limit button movement as show here
Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

RickC.

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 133
Re: HOHNER POKERWORK OR HOHNER ERICA!
« Reply #29 on: November 24, 2009, 04:13:22 PM »


I also notice that the button holes have much sharper edges on the Chinese made Hohners.






 Yes- the only thing I really didn't like about the Chinese Double Ray I had for a while.


                         Rick
Logged

callmemario

  • HOHNER ERICA G/C
  • Regular debater
  • ***
  • Offline Offline
  • Posts: 114
Re: HOHNER POKERWORK OR HOHNER ERICA!
« Reply #30 on: November 24, 2009, 04:17:48 PM »

UGH!, that sounds rather painful?!...if it's that bad of a problem, one would have to smooth out the button hole edges by sanding them...or play with a pair of gloves ! ;-)


"I also notice that the button holes have much sharper edges on the Chinese made Hohners; maybe to discourage players from pushing their fingers too far into the holes. The resultant "mother-in-law's blessing" can make you change your playing style smartly...."
//"(Edited to explain that the phrase "mother-in-law's blessing", where I come from, is that peeling of the skin beside the nail which can sting like hell".





Logged
"Life is what happens to you while you're busy making other plans." (John Lennon)
*********************************************************************

saguaro_squeezer

  • Good talker
  • **
  • Offline Offline
  • Posts: 51
  • Pokerworks, Crane Duets, Bandoneon
Re: HOHNER POKERWORK OR HOHNER ERICA
« Reply #31 on: November 24, 2009, 06:57:54 PM »

Hi Mario,

I goofed on my email address.  I've sent you a PM with some pictures.  They're of the box before I put the new straps and brackets on.

Logged
Rod Wagoner
Tucson, AZ

"How great life is if you just accept the small gifts and don't waste time on wishes." - Clinton "Bubba" Hare, Airheads Beemer Club

"OOP-ACK-THHPT!" - Bill the Cat
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal