Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Leaking Bellows  (Read 1265 times)

0 Members and 1 Guest are viewing this topic.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Leaking Bellows
« on: March 28, 2024, 08:24:30 PM »

Hello everyone. I am looking for advice on repairing a leaking Bellows. The cardboard has detached from the wooden frame on the bottom bass side. Also there is a hole in the corner. Can this be repaired. Do I have to remove the wooden frame completely or just glue back the affected side. What kind of glue is required? Do I need to replace the Bellows strip before re glue.
Sorry, no photo as filesize is too big
Many Thanks
Logged

Pat McInnis

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 390
Re: Leaking Bellows
« Reply #1 on: March 28, 2024, 08:33:13 PM »

It's hard to say how to deal with your frame separation without seeing it but you might be able to run a bead of crazy glue or similar around both seams and top them with some weight. I've been doing some inside corner repair lately with really thin pig's skin that i got from the scrap bit at our local shoe repair shop. Sine a flashlight from the inside out to check for more holes. It's works best in a dark room.
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Leaking Bellows
« Reply #2 on: March 28, 2024, 09:48:59 PM »

Thank you Pat for the advice. I take it crazy glue is Super Glue (Gorilla, Loctite etc.). Good idea to examine in darkened room. This bellows is 100 years old so goodness knows what I will find. 
Logged

Rog

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2525
  • Repair and tuning in Hants
Re: Leaking Bellows
« Reply #3 on: March 29, 2024, 12:29:56 PM »

I'd advise yellow wood glue. Others may disagree.

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Leaking Bellows
« Reply #4 on: March 29, 2024, 12:48:28 PM »

Thanks Rog
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Leaking Bellows
« Reply #5 on: March 29, 2024, 07:19:36 PM »

Crazy (aka super) glue is a very bad choice. I use bookbinding glue, but any white PVA will do. Also: glue doesn't attach well to the shiny side of most types of bellows tape, make sure that there is not more than a mm or so of it between frame and bellows.
« Last Edit: March 29, 2024, 07:23:46 PM by diatonix »
Logged

mChavez

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 713
Re: Leaking Bellows
« Reply #6 on: March 29, 2024, 07:31:44 PM »

Good quality bookbinding glue for attaching folds to the wooden frame has worked for me.
Logged

Michael Denieffe

  • Member
  • *
  • Offline Offline
  • Posts: 49
Re: Leaking Bellows
« Reply #7 on: March 29, 2024, 09:37:49 PM »

Thanks to everyone for the good advice
Logged
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal