Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2]   Go Down

Author Topic: Hardware for a melodeon case  (Read 6490 times)

0 Members and 1 Guest are viewing this topic.

acctech

  • Member
  • *
  • Offline Offline
  • Posts: 49
  • Crazy for free reeds!
    • Limex USA
Re: Hardware for a melodeon case
« Reply #20 on: June 17, 2010, 05:14:25 AM »

I don't know if they ship abroad, however I have ordered from Micro Fasteners http://www.microfasteners.com/catalog/products/TWSFHWB.cfm before and my experience was positive, they have a good selection including machine screws. ***HIGH marks for quality. I ordered an assortment of all the brass small gauge screws. The heads were precise, slots on center and cut to proper depth; something you have to be especially mindful about on small hardware.
Logged
Professional Accordion Technician since 1999
Diatonic accordions of all kinds! Piano accordion too :-)

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Hardware for a melodeon case
« Reply #21 on: June 17, 2010, 08:46:37 AM »

Its a particular problem when working on nice old concertinas which use several very small sizes of screw which are very difficult to buy today.  Any suggestions for suppliers?
Steve Dickinson makes his own. As with many concertina parts, there are no "suppliers".
The screws that hold the ends on most concertinas are a very unusual shape anyway - long and thin with a short thread.

I replaced a fixing screw for the air lever on my Hohner 1-row with one bought from a local wind instrument repair shop. It's not an exact match, and actually I was surprised at how few tiny screw sizes they had - I thought there'd be hundreds!
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hardware for a melodeon case
« Reply #22 on: June 17, 2010, 09:53:33 AM »

Steve Dickinson makes his own. As with many concertina parts, there are no "suppliers".
The screws that hold the ends on most concertinas are a very unusual shape anyway - long and thin with a short thread.

I was really asking about small woodscrews.   I'm part way through tooling up to make concertina endbolts myself.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Malcolm Austen

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 495
  • any old hohner
Re: Hardware for a melodeon case
« Reply #23 on: June 17, 2010, 12:09:09 PM »

I think we had the small wood screw discussion a year or two ago but don't have time to search for the thread just now. I found a company who had a good range and would see you small numbers I will look up who they were tonight.
Logged
aka malodeon
Pages: 1 [2]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal