Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: Tim Reed Cajun accordions  (Read 30095 times)

0 Members and 1 Guest are viewing this topic.

kenneads

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Tim Reed Cajun accordions
« Reply #40 on: October 18, 2010, 12:10:15 PM »

I purchased a Tim Reed Cajun Accordion. Butt joints aside, I am not really happy with it. The stops are stiff - one is almost unworkable. I am going to pull it apart and see if I can remedy the problem. Also I am not really happy with the tuning. As I live in Australia sending it back for repair is not really an option.
Caveat Emptor - let the buyer beware. You get what you pay for.
Logged

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Tim Reed Cajun accordions
« Reply #41 on: October 18, 2010, 06:16:07 PM »

Caveat Emptor - let the buyer beware. You get what you pay for.

I'm sure there are several reasons for your dissatisfaction, but the stiff stop shouldn't be a problem.  That box has just moved from one climate to another that is drastically different.  Give the wood a chance to acclimate.  I'm more concerned about the stops that are NOT too stiff right now -- they might open up later and result in some air leakage.
In past threads regarding mitres vs. butt joints, Jeff and others (present author included) have taken flak for being picky about something not relevant to the sound or playability of the box.  Yet we have asserted time and time again that the joinery can be indicative of other, perhaps less visible, ways of taking less time and care and applying less skill to building an accordion.  While it is entirely possible for a satisfactory box to be made with butt joints, there is also a good chance that the builder also takes little pride in the keyboard's construction, the reedblocks or the tuning and setting of reeds. 
On another forum a butt-joint defender claimed that he had built several houses with butt joints, and it they were good enough for houses they were good enough for accordions.  By this same logic, it would make sense to build accordions out of wet "whitewood" sold in Home Depot.  Perhaps tar shingles for roofing should be used for the bellows?
Sorry for the rant, it's just that it is clear to me that the above poster was exposed to the "Tim Reed Cajun Accordions" via the internet, and that the same internet could have easily warned him away from what appeared to be a sub-par product.

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #42 on: October 18, 2010, 09:31:10 PM »

Reed  and I had some private e-mail exchanges..
seems like a nice guy but hopelessly deluded.
His idol,  Savoy.
His boxes, Savoy copies.

Butt brothers.


Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Tim Reed Cajun accordions
« Reply #43 on: October 18, 2010, 10:08:29 PM »

Butt brothers.


......errrrrr.....sounds like you're implying more than just a common approach to joinery.... :o
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #44 on: October 18, 2010, 11:22:47 PM »

Definitely wait for the wood to acclimatise.
I've brought accordions back from hot, humid Louisiana to cold, wet Wales and had to wait months for them to dry out.
Australia is another kettle of crawfish altogether.
Let it breathe.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

kenneads

  • New Starter
  • Offline Offline
  • Posts: 2
Re: Tim Reed Cajun accordions
« Reply #45 on: October 19, 2010, 10:43:29 AM »

Definitely wait for the wood to acclimatise.
I've brought accordions back from hot, humid Louisiana to cold, wet Wales and had to wait months for them to dry out.
Australia is another kettle of crawfish altogether.
Let it breathe.

How long does acclimatisation take? Contrary to popular belief; the climate of Australia differs immensley. Tim Reed accordions are not manufactured in hot, humid Louisiana but in cold, wet Chicago. Where I happen to live in Australia it is cold wet and windy. Very much down south, just across from Tasmania. Next stop Antarctica.

Not trying to start an argument about Tim's accordions, just making some observations.
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #46 on: October 19, 2010, 11:35:19 AM »

Sorry, I didn't realise he's in Chicago.
Definitely less humid than the swamps.  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Tim Reed Cajun accordions
« Reply #47 on: October 19, 2010, 04:19:37 PM »

I have a Cajun-built one-row that is pretty climate sensitive.  In a humid Maine summer it's quite happy and mellow.  In the heating season, once I fire up the wood-stove, it behaves very differently.  If I keep it in the living room for a few weeks the buttons start to snag a little on the holes, the stops stiffen up, and the whole thing creaks a bit when I start to play it.  I've found that storing it in the closet on the outside wall of the house, where we keep damp boots and coats, eases this problem significantly.  It took me quite a while to figure this out, and I had several false starts (eg unheated mud-room: bad plan).  Other boxes seem far more stable.  I suspect this is because many more of the Cajun's components are wooden, whereas the various and sundry other boxes I play have a lot more metal and plastic bits.  Another factor may be that some critical tolerances and clearances are a bit finer on "hand-crafted" instruments, so they don't take to change so well.  I had a chance to play a Wesson Clipper the other day (#10: thanks Liam!), and amongst other things, I was most impressed by how precise it all felt.  Perhaps a locally-built instrument tends to be better acclimatized?
Logged
Charter Member Presumpscot and Fore River Accordion Club

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Tim Reed Cajun accordions
« Reply #48 on: October 19, 2010, 05:47:07 PM »

I think it's more likey that the instrument was built without attempting to control the humidity of the enviroment in which it was made and/or with inadequately seasoned wood. If an instrument is made somewhere that's too dry or too wet or worse still, with different parts assembled at different humidity levels in an uncontrolled enviroment then it will react adversely to climactic changes. This problem is compounded if the timber isn't well-seasoned and is still drying out.

I have to take great care to maintain a level of 40-45%RH in my workshop, not only to ensure that the different parts all stay the shape and dimensions they're supposed to whilst I'm working on them but also that the finished instruments will react evenly to seasonal changes and were made in the middle of the range of humidity they'll typically encounter and can handle being a bit drier or wetter without too much trouble.
Logged

ceemonster

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: Tim Reed Cajun accordions
« Reply #49 on: October 19, 2010, 09:11:14 PM »

well, since it's come up.....i have a good-quality C box purchased a couple years ago new as-new from an ebay seller, and one stop will not pull.  i have pulled as hard as i dare but don't wish to risk breaking it---any suggestions/thoughts?
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Tim Reed Cajun accordions
« Reply #50 on: October 19, 2010, 10:18:29 PM »

This might sound incredibly daft but are you sure that there are actually as many voices as there are stops and that one isn't a non-functioning dummy put on for looks like some early Messerviers?.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #51 on: October 20, 2010, 12:22:53 AM »

Chicago is humid in spring through summer

less so late fall and winter.


And  my my  yes those reeds swell and shrink in the humidity...

there are always going to be apologists.


Logged

Matthew B

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 894
Re: Tim Reed Cajun accordions
« Reply #52 on: October 20, 2010, 03:36:49 PM »

Chicago is humid in spring through summer

less so late fall and winter.

And  my my  yes those reeds swell and shrink in the humidity...
there are always going to be apologists.

Wow.  I didn't know that.  I'll have to be more careful in the future. 

Logged
Charter Member Presumpscot and Fore River Accordion Club

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Tim Reed Cajun accordions
« Reply #53 on: October 20, 2010, 05:57:59 PM »

Steel reeds swelling and shrinking in the humidity??? 
Logged

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Tim Reed Cajun accordions
« Reply #54 on: October 20, 2010, 06:13:29 PM »

I think that Jeff's post was sarcasm...
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Tim Reed Cajun accordions
« Reply #55 on: October 20, 2010, 10:35:44 PM »

I think that Jeff's post was sarcasm...

No, really, not Jeff, surely? (chortle)  ;D
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

ceemonster

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 108
Re: Tim Reed Cajun accordions
« Reply #56 on: October 21, 2010, 10:07:01 PM »

[This might sound incredibly daft but are you sure that there are actually as many voices as there are stops and that one isn't a non-functioning dummy put on for looks like some early Messerviers?]

well....this is a junior martin "C" box. i can check, but never heard of "dummy stops" on those. i will say, though, that this stop is so resistant i can't believe there is in fact a stop there. it doesn't feel like there's anything to pull, it feels nailed shut.
Logged

melodeon

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1732
Re: Tim Reed Cajun accordions
« Reply #57 on: September 23, 2013, 04:08:02 AM »

insist that the stops are for the maker or repair person to tune ONLY  and not to be used by the player.Keep in mind that many Cajun box makers
Logged

ButtonBox21

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 106
Re: Tim Reed Cajun accordions
« Reply #58 on: September 23, 2013, 12:25:27 PM »

Here is the link to the Cajun Accordion Discussion Group. http://pub21.bravenet.com/forum/static/show.php?usernum=1722942123&frmid=16&msgid=0 Or you can go to Big Nick Box Lessons and click on the link for the forum.  They are the group to go to if you want qualified feedback on Tim Reed accordions. There are players and builders on that site and you can get plenty of good info from them. Personally, I have never heard anything bad about Tim Reed accordions. I almost bought one a few years ago but couldn't get the money for it. Good luck. :||:
Logged
Keep on Squeezin'

kenakordeon

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 264
Re: Tim Reed Cajun accordions
« Reply #59 on: September 23, 2013, 12:26:13 PM »

My experience with Tim and his melodeons...He was an easy person to do business with and was always responsive to my emails.  The melodeon arrived by his estimated delivery date.  The stops were very stiff and acclimating for two weeks in another climate did not make them any easier to move.  Air was escaping at the flappers, the reeds themselves were breathy, I'm guessing due to bad leather adjustment.  I returned it to Tim for adjustment.  He returned it to me a few weeks later and then there were other problems including a reed plate that had fallen out of the block.  I was angry, called him and he agreed to refund my money including some extra to cover shipping costs.

This all happened almost three years ago.  I'm hoping that his skills have improved and that his boxes are now quality instruments.  I know at the time he was juggling full-time work, family and the building of his instruments.  For anyone who has been in that position its not easy and usually something suffers.

All that said, he was a pleasant person with, I believe, the right intentions.
Logged
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal