Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Removing rusted bellows pins  (Read 1556 times)

0 Members and 1 Guest are viewing this topic.

David J

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 186
Removing rusted bellows pins
« on: August 23, 2010, 01:55:24 PM »

I know that this topic has been covered in various places before and I've had a good read around various postings.

I've just acquired an old Hohner Tango I PA and before deciding whether it's worth restoring wanted to have a look inside, but have been unable to shift a single pin. The pliers which work OK on my melodeons just slip off, so I have ordered some end nipper pliers today. I seem to remember from the Mendlesham workshop last year that Rees had doctored his with a little notch on either side to create a better grip on the pin head.

The Hohner pins have a round head with a little collar underneath.

I think that heating the pins with a soldering iron is one technique, but is there anything else that can be suggested? I don't think levering them is a good idea as it would be easy to crack the celluloid.

Any ideas gratefully received.
Logged
Luukinen Elene III, Baffetti Binci, and an increasing number of Hohners

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Removing rusted bellows pins
« Reply #1 on: August 23, 2010, 02:01:54 PM »

The answer probably can be found here:

http://forum.melodeon.net/index.php/topic,2600.0.html

Ebor_fiddler

  • Chris
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2340
  • Hohner 1040 C One-Row, Sandpiper D/G, Liliput C/F
    • Ebor Morris
Re: Removing rusted bellows pins
« Reply #2 on: August 24, 2010, 05:39:45 PM »

I use one of those tools for removing nails from floorboards. It just needs a wiggle to get it into position for lifting (Yes! - tacklifters! That's what they are called!) It seems to produce no observable damage and, even if you buy a new good one, is relatively inexpensive.  (:)
Logged
I'm a Yorkie!
My other melodeon's a fiddle, but one of my Hohners has six strings! I also play a very red Hawkins Bazaar in C and a generic Klingenthaler spoon bass in F.!! My other pets (played) are gobirons - Hohner Marine Band in C, Hohner Tremolo in D and a Chinese Thingy Tremolo in G.
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal