Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Hohner "Steel Reeds" rehab  (Read 9099 times)

0 Members and 1 Guest are viewing this topic.

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Hohner "Steel Reeds" rehab
« Reply #20 on: November 10, 2010, 04:06:49 AM »

I'm not sure which way to go on the rivets/tacks with the waxing.  Wouldn't that have something to do with how vigorously one pushed and pulled the bellows?  Here is a pic of the Single Row that I picked up on Ebay.  The second one is a Paolo gotten the same way...that's the next project.  Now that one appears to have it's reeds not only riveted in but they are caulked? with some sort of material that apparently is for sealing.  The one in the picture is a G/C two voice.  In pretty darn good fettle.
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Hohner "Steel Reeds" rehab
« Reply #21 on: November 10, 2010, 07:29:11 AM »

I'm not sure which way to go on the rivets/tacks with the waxing.  Wouldn't that have something to do with how vigorously one pushed and pulled the bellows? 
Unless the instrument is seriously abused  >:(, properly applied reed wax on its own is perfectly capable of withstanding the push/pull pressures of the bellows in normal use. Just don't go leaving the instrument in a car on a hot sunny day (the wax will melt) nor in a car boot (trunk?) on a freezing cold night (the wax may crack).
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

LJC

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 527
Re: Hohner "Steel Reeds" rehab
« Reply #22 on: November 10, 2010, 12:31:35 PM »

I'm not sure which way to go on the rivets/tacks with the waxing.  Wouldn't that have something to do with how vigorously one pushed and pulled the bellows? 

If you managed to produce enough air pressure to dislodge a good condition, correctly waxed, reed plate I think you would probably be on a course for destroying either your bellows or your shoulder! I don't think that it is even a problem worth contemplating.

I sort of assumed that Hohner pinned the reed plates before waxing as it was a separate factory job, to fit the reeds and pin, and then pour the wax, but it is just my idle speculation.
Logged

jeverist

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: Hohner "Steel Reeds" rehab
« Reply #23 on: November 10, 2010, 06:20:51 PM »

@Malcolm:  nice decals there!  as far as installing the tacks and nails, I agree that "thumbing" in the tacks is the way to go.  Can always get a bigger hammer later.  I am more concerned with the small headed nails which are used to "brace" (took me a while to get Rees's analogy) the low note bass reed plates onto the perpendicular blocks.  These nails are the kind you would ordinarily grip with a needle nose pliers and tap in with your lightest hammer.  These are what caused me to speculate about the possibility that the reed plates might have originally been waxed and pinned into these blocks before the blocks were glued to the soundboard.  Might be able to push the nails in with something, but either way the blocks don't look like they would take the pressure (or impact) without some support.  Thanks for the input

John
Logged
4v C#/D Paolo Soprani, derelict G & D single-row Hohners, Dipper C/G 32b Anglo, Acadian C

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner "Steel Reeds" rehab
« Reply #24 on: November 10, 2010, 10:53:05 PM »

"Belt and Braces"

Careful - not taking any chances.

Origin

Belts and braces (a.k.a. bracers) are meant to hold one's trousers up. Going 'belt and braces' is a double insurance against having them fall down. The figurative use, as a general term for cautiousness, was coined around the mid-20th century.

In the USA 'belt and suspenders' is used with just the same meaning. That emerged at around the same time too. The first citation in print we have is from the Galveston Daily News, 1935 - in their 'News Behind the News' column:

"A pessimist wears both belt and suspenders."
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Hohner "Steel Reeds" rehab
« Reply #25 on: November 11, 2010, 12:51:57 AM »

Belt & braces?  Guilty as charged.
Logged
Tuner/repairer, now retired.

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Hohner "Steel Reeds" rehab
« Reply #26 on: November 11, 2010, 01:20:13 AM »

Jeverist, I was going to say decals rather than transfers, but generally I've found it  a word that is not recognised by many people (except those of us with a mis-spent childhood building Airfix models...)

Many accordion makers use those tacks you describe. I still wouldn't use a hammer on them, but grip them with a pair of pliers and push them in. As I said, the wood is quite soft and the tacks should be quite sharp.

From my experience however, pins are less essential on those big bass reeds on blocks. But it is the reed plates that are "flat mounted" which really need that extra bit of encouragement to stay put imho; these are the ones that tend to become loose, probably because of the way the air hits the plates face-on when pulling the bellows rather than at an angle as with the plates on blocks.

LJC, I have always assumed that the tacks were fitted after waxing, when the wax is still a bit soft, but not runny. That's what I do anyway....

And incidentally, I do have customers who regularly destroy both bellows and shoulders; one person's abuse is another person's enthusiasm   >:E
Logged
Tuner/repairer, now retired.

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Hohner "Steel Reeds" rehab
« Reply #27 on: November 11, 2010, 08:13:16 AM »

Jeverist, I was going to say decals rather than transfers, but generally I've found it  a word that is not recognised by many people (except those of us with a mis-spent childhood building Airfix models...)

I believe the graphics on Hohner boxes were screen printed, rather than applied as transfers/decals
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Hohner "Steel Reeds" rehab
« Reply #28 on: November 11, 2010, 12:05:22 PM »

Jeverist, I was going to say decals rather than transfers, but generally I've found it  a word that is not recognised by many people (except those of us with a mis-spent childhood building Airfix models...

Or the old hippies amongst us with a fondness for Captain Beefheart albums...
Logged
On the edge of Cheshire's Golden Triangle, apparently...

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Hohner "Steel Reeds" rehab
« Reply #29 on: November 11, 2010, 12:36:01 PM »

Yup!
Logged
Tuner/repairer, now retired.

baz parkes

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1894
    • All Blacked Up
Re: Hohner "Steel Reeds" rehab
« Reply #30 on: November 11, 2010, 01:24:31 PM »

Gimme that harp, boy...but only if fitted with hohner steel reeds... ;)
Logged
On the edge of Cheshire's Golden Triangle, apparently...

jeverist

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: Hohner "Steel Reeds" rehab
« Reply #31 on: November 11, 2010, 01:42:47 PM »

and my personal favorite:

Logged
4v C#/D Paolo Soprani, derelict G & D single-row Hohners, Dipper C/G 32b Anglo, Acadian C

Guy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 776
  • Not quite enough melodeons....
    • Cats Claw
Re: Hohner "Steel Reeds" rehab
« Reply #32 on: November 11, 2010, 02:03:56 PM »

Complete the well-known phrase or saying...
" A squid eating dough in a polyethelyne bag....."
Logged
Guy, in South Wales

Cats Claw, http://www.cats-claw.co.uk

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Hohner "Steel Reeds" rehab
« Reply #33 on: November 12, 2010, 02:04:11 AM »

Complete the well-known phrase or saying...
" A squid eating dough in a polyethelyne bag....."

is FAST AND BULBOUS!

Love that record, but the original pre-release (Don's mixes) of Bat Chain Puller is my favorite.

OwenG

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 297
Re: Hohner "Steel Reeds" rehab
« Reply #34 on: November 12, 2010, 12:08:46 PM »

How's about a Beefheart Theme of the Month??  >:E
Logged

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Hohner "Steel Reeds" rehab
« Reply #35 on: November 12, 2010, 05:49:55 PM »

How's about a Beefheart Theme of the Month??  >:E

Yay! I'm gonna grow fins and run off with a mermaid and leave you land-loving women alone.
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Hohner "Steel Reeds" rehab
« Reply #36 on: November 17, 2010, 12:11:45 PM »

Wow! A classic thread drift/hijack if ever I saw one.

Sorry, John. And good luck with your project.
Logged
Tuner/repairer, now retired.

jeverist

  • Member
  • *
  • Offline Offline
  • Posts: 22
Re: Hohner "Steel Reeds" rehab
« Reply #37 on: November 17, 2010, 12:55:05 PM »

Thanks, Malcolm, but no need to apologize.  I hadn't thought of Captain Beefheart in decades.  It was fun.  Rehab to start soon, but have a new toy to squeeze  :||:  I bought an old Hohner 3V which had been converted to C#/D by Mike Rowbotham.  What a sound!
Logged
4v C#/D Paolo Soprani, derelict G & D single-row Hohners, Dipper C/G 32b Anglo, Acadian C

Andrew Culwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 620
Re: Hohner "Steel Reeds" rehab
« Reply #38 on: November 17, 2010, 05:40:09 PM »

Is that c#d sold to you by a fellow in North Carolina? If so then I've played that box!
Logged
Hohner's, Paolo Soprani red 4 voice, Paddy Clancy Celtic

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Hohner "Steel Reeds" rehab
« Reply #39 on: November 17, 2010, 07:25:28 PM »

I was wondering if it was the lovely black 3-v that has been 'on hold' at the Button Box website for the past week or so... I'm dying to get one of those!
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal