Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 2 [3] 4   Go Down

Author Topic: Plywood v's solid wood for contruction?  (Read 21218 times)

0 Members and 1 Guest are viewing this topic.

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #40 on: September 26, 2011, 09:01:19 PM »

But a Tyke arguing against plain speech?, you've obviously been in Kent too long and started thinking like those southern nancy boys...get thee back oop t'Yorkshire quick!. ;D

Hmm, hoist by my own petard no less. Don't you just hate smart-arsed kids?  ;D

As a fellow guitar fettler surely the term 'table' has a particular significance peculiar to the accoustic egg slicer. Oh and folk that mess with violins are also luthiers but they wouldn't dream of fouling their sound post setters with anything vaguely resembling a lute.  :|glug
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Pete Dunk

  • Typo Expert
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3706
Re: Plywood v's solid wood for contruction?
« Reply #41 on: September 26, 2011, 09:13:18 PM »

At bottom, some of you seem to be using the thread as a soundingboard for personal hobbyhorses. I think you should step up to the plate and face the holes at the base of your argument and I'd like to table the motion that we end by opening up more pliable areas of discussion. This ought to be palletable to all and will save us all from further boardum.
I probably started that so sorry for any offence. There is also the small matter of regional differences in the sense of humour. Sometimes it looks a bit harsh if you're not in on the way the game is played locally. I'll try to be a bit more 'universal' in future Steve.

Pete.  :-[
Logged
Squeezing on the Isle of Oxney, UK
Primo (Serenellini) D/G
Isis D/G
Hohner B/E, G/C, C/F, Bb/Eb G/C/F
Liliputs D/G (G scale), C/F, Bb/Eb, Albrecht Custom D/G (G scale)

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Plywood v's solid wood for contruction?
« Reply #42 on: September 26, 2011, 09:32:31 PM »

At bottom, some of you seem to be using the thread as a soundingboard for personal hobbyhorses. I think you should step up to the plate and face the holes at the base of your argument and I'd like to table the motion that we end by opening up more pliable areas of discussion. This ought to be palletable to all and will save us all from further boardum.

Perfect!

 ;D ;D ;D  :|glug

Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Plywood v's solid wood for contruction?
« Reply #43 on: September 26, 2011, 09:37:58 PM »

Back to the original thread...

I'm in need of designing and building a keyboard for my 2v melodeon. Has anyone ever seen key levers made from plywood? Aircraft ply makes sense since it's so stable. I'm not advocating use of plywood for this. I just have a feeling that it might be dimensionally regular enough in thickness that it could be used. And it might solve some of the problems with using solid wood that can warp.

Thoughts?
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F

Graham Spencer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3548
  • MAD as a wet Hohner........
Re: Plywood v's solid wood for contruction?
« Reply #44 on: September 27, 2011, 02:53:55 PM »

Out of idle curiosity I looked up "fondo" in an Italian dictionary and it has a number of meanings; its primary meaning seems to be "bottom" (so you might have to explain to your repairer that you were having trouble with a crack in your bottom), but it also means end, back, goal-line, fund, seat of the trousers and leading article in a newspaper. No ambiguity there then.  It occurs to me that "baseboard" might be an acceptable term as it is the base on which the "works" of the box are built, but "bass baseboard" sounds a bit clumsy, so how about "foundation board"? Either way up, plywood  would appear to be the best stuff to make it from!

Graham
Logged
Among others, Saltarelle Pastourelle II D/G; Hohner 4-stop 1-rows in C & G; assorted Hohners; 3-voice German (?) G/C of uncertain parentage; lovely little Hlavacek 1-row Heligonka; Bâ™­/Eâ™­ Koch. Newly acquired G/C Hohner Viktoria. Also Fender Jazz bass, Telecaster, Stratocaster, Epiphone Sheraton, Charvel-Jackson 00-style acoustic guitar, Danelectro 12-string and other stuff..........

Squeezing in the Cyprus sunshine

Andy in Vermont

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 948
  • Mélodie
    • Melodeon Minutes (blog)
Re: Plywood v's solid wood for contruction?
« Reply #45 on: September 27, 2011, 05:37:54 PM »

I like fondo, if for no other reason than it provides a basis for someone to feel entitled to judge whether someone else is pretending/pretentious.  I believe that the term initially made its way onto this forum when Rees mentioned it, and I can't imagine that Rees is pretending -- seems like a straightforward, honest fellow to me.  But perhaps I lack the underlying Anglo-centrism that might help me to experience enough "deep seated hatred" to discern a pretentious person from one who just thinks the word fondo would solve this recurring debate.

That said, "soundboard" seems reasonable, as in the sentence, "While a guitar's soundboard vibrates, a melodeon soundboard should remain pretentiously stiff." 

When referring to the fondo/soundboard on a one-row "German" style (i.e. Cajun or Quebecois) box, I think that "endplate" makes a lot of sense, and it is a term that I have heard in use. It doesn't make so much sense for the analogous parts in an Italian or "Vienna" style box, however, where they are not really at the "end" of the box.

I've referred to the part as "action board" and I think this is a reasonable term.

At any rate, I believe that we are a long way off from really understanding the effect of the various material choices on the fondo's performance. And depending on how one prioritizes the functions of the board (and there are several), and depending on the type of accordion (and its size), the various choices of material might not be simply "better" or "worse" from each other.  There is certainly room for someone who is willing to invest the time and money into some experiments where otherwise comparable boxes are tested with various fondo characteristics (thicknesses, materials).

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Plywood v's solid wood for contruction?
« Reply #46 on: September 27, 2011, 07:32:37 PM »

...I looked up "fondo" in an Italian dictionary and it has a number of meanings; its primary meaning seems to be "bottom"...

This is no doubt why you didn't appear to click onto the fact that my earlier post beginning "at bottom" was intended to be amusing. There was absolutely no offence, Graham.

Continuing with the idle linguistic musing, and changing one letter: Andy S, how would you react if invited to partake of a fondu? Remonstrate that "melted" is a perfectly good English word? I suppose anybody who would serve a fondu is pretentious no matter what they called it...  >:E

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Plywood v's solid wood for contruction?
« Reply #47 on: September 27, 2011, 07:54:02 PM »

[quote author=Andy Simpson

Just to clarify, my objection to all this "fondo" nonsense is not on the basis of linguistic xenophobia or Anglish purism but rather on a deep-seated hatred for unnecessary jargonisation and pretentiousness.


[/quote]
 To be honest Steve I thought Andy.S was pulling our communal leg with this one  ;D mory
Logged

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Plywood v's solid wood for contruction?
« Reply #48 on: September 27, 2011, 08:07:53 PM »

I've often heard people refering to old Paolo's with wooden sound boards or alloy sound boards which does suggest a contributory factor in the production of sound, I've had various Paolo's up against each other and there definatly seems to be a relationship between the tonality and the material employed. Likewise with some early Saltarelles (wooden sound board) against some later (Alloy sound board) ones minus the grill of coarse, I'm not that convinced that sound board is not the correct term. Am I correct in thinking there is general agreement relating to the grill constuction material's effect on free reed sound production? mory
Logged

Thrupenny Bit

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7232
  • happily squeezing away in Devon
Re: Plywood v's solid wood for contruction?
« Reply #49 on: September 27, 2011, 08:11:38 PM »

Mory: I notice Loffet's 3 row 'Pro' has an aluminium front grill, and my tommy has an Aluminium grill with an overlay of wood veneer.
I think Loffet talks about it affecting the sound in one of his many notes in the FAQ on his site.
Q
Logged
Thrupenny Bit

I think I'm starting to get most of the notes in roughly the right order...... sometimes!

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Plywood v's solid wood for contruction?
« Reply #50 on: September 27, 2011, 08:13:43 PM »

The effect of the grill is easy to asses - just compare the difference with grill off or on.   
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Anahata

  • This mind intentionally left blank
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6767
  • Oakwood D/G, C/F Club, 1-rows in C,D,G
    • Treewind Music
Re: Plywood v's solid wood for contruction?
« Reply #51 on: September 27, 2011, 08:30:03 PM »

I've often heard people refering to old Paolo's with wooden sound boards or alloy sound boards which does suggest a contributory factor in the production of sound

Yes, though I suspect it has more to do with its stiffness so that it doesn't absorb energy from the reeds, which might make the notes start quicker, and possibly also that higher harmonics are absorbed less by a metal surface than a wooden one, giving a brighter sound. I don't think the board actually radiates much sound.
Logged
Слава Україні !
Music recording and web hosting: www.treewind.co.uk
Mary Humphreys and Anahata: www.maryanahata.co.uk
Ceilidh band: www.barleycoteband.co.uk

mory

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 752
Re: Plywood v's solid wood for contruction?
« Reply #52 on: September 27, 2011, 08:38:44 PM »

Mory: I notice Loffet's 3 row 'Pro' has an aluminium front grill, and my tommy has an Aluminium grill with an overlay of wood veneer.
I think Loffet talks about it affecting the sound in one of his many notes in the FAQ on his site.
Q
Yes certainly the alloy grill seems to colour the sound and to make it brighter . My own experience of the different materials for base/sound board leads me to believe that they contribute in a similar way, mory

I've often heard people refering to old Paolo's with wooden sound boards or alloy sound boards which does suggest a contributory factor in the production of sound

Yes, though I suspect it has more to do with its stiffness so that it doesn't absorb energy from the reeds, which might make the notes start quicker, and possibly also that higher harmonics are absorbed less by a metal surface than a wooden one, giving a brighter sound. I don't think the board actually radiates much sound.

I suppose it is possible to test that by covering the open area of the "board" with a deadening material mory
Logged

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Plywood v's solid wood for contruction?
« Reply #53 on: September 27, 2011, 10:55:10 PM »

Continuing with the idle linguistic musing, and changing one letter: Andy S, how would you react if invited to partake of a fondu? Remonstrate that "melted" is a perfectly good English word? I suppose anybody who would serve a fondu is pretentious no matter what they called it...  >:E

See that thing in the distance behind you?. It's the point, you've just missed it. ;D

It's all about clarity of communication and "fondo" doesn't clarify anything or possess any special meaning or extra depth in it's original context. All it does is obfuscate with an extra layer of completely unnecessary jargon in a manner that bears all the hallmarks of pretentiousness.

Though "soundboard" is a misnomer, it's a well established and widely understood term and you could easily argue that trying to come up with a new one is locking the stable door after the horse has bolted....or locking the stable door after the horse has bolted and insisting that you've just locked the porta....

Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Plywood v's solid wood for contruction?
« Reply #54 on: September 28, 2011, 10:04:54 AM »

I do not understand why using the word "fondo" is preferred over using an English word or compound to refer to the same part. I don't mind either way, and either term is fine by me, but I can't see around why it should make more sense to use an Italian word for only one part of the accordion, when the rest of the accordion is described with English words. Okay, two words... "rotella." I confess I am an adherent to the term "soundboard" because I'm generally not inclined to use an Italian word for only one part of the instrument. What do the Italians call the keyboard, treble action, pallets, reed blocks, and bellows? If it's a question of clarity, so that misconceptions about the part's role in sound propagation are not themselves propagated, then I think "pallet board" is acceptable and rather tidy. I might even start saying that myself...  :|glug

But there is enough problematic jargon floating around in English, I think, between our two countries. Here I am on a predominantly British board (which I appreciate), talking about accordions (ahem, melodeons) with British terminology. I've adopted these terms as my own without giving much thought to having done so. In the States a lot of people use the word "valve" for what British melodeonists call a "pallet." And many people here also use "leather" to denote what the British call a "valve" when what they are really talking about is what the Italians call "ventile." Last month I was on the phone with a Utah accordion dealer inquiring about his prices for replacement parts. Halfway through the conversation it dawned on me that we were talking about different parts, his valves and my pallets, that he was very confused, and had no idea what I was talking about. Indeed, the man had never seen a Pokerwork but was vaguely familiar with "the gold and black painted Vienna accordion."

It's just my two cents, which I couldn't resist the urge to add. The rest of this thread has been thoroughly enjoyable, by the way. Please carry on.  (:)
« Last Edit: September 28, 2011, 10:09:49 AM by Christopher K. »
Logged

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Plywood v's solid wood for contruction?
« Reply #55 on: September 28, 2011, 10:49:16 AM »

And many people here also use "leather" to denote what the British call a "valve" when what they are really talking about is what the Italians call "ventile." 
the Italian equivalent for leather (reed-)valve is "pelle"; when they started using  German plastic valves they adopted the German word "Ventil" (which in German refers to both types of valves) and created their "Ventillo". It. "valvola" means pallet.
Couldn't resist adding to the confusion... 
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Plywood v's solid wood for contruction?
« Reply #56 on: September 28, 2011, 10:56:57 AM »

And many people here also use "leather" to denote what the British call a "valve" when what they are really talking about is what the Italians call "ventile." 
the Italian equivalent for leather (reed-)valve is "pelle"; when they started using  German plastic valves they adopted the German word "Ventil" (which in German refers to both types of valves) and created their "Ventillo". It. "valvola" means pallet.
Couldn't resist adding to the confusion... 

You're absolutely right. And the guy on the phone in Salt Lake City was saying "plastic leathers." :|glug
« Last Edit: September 28, 2011, 11:09:49 AM by Christopher K. »
Logged

Bob Ellis

  • Hero?....Where's my medal, then?
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2878
  • Ain't I cute?
Re: Plywood v's solid wood for contruction?
« Reply #57 on: September 28, 2011, 01:05:31 PM »

The English translation of Thierry Benetoux's The Ins and Outs of the Accordion calls it the sounding board...

...and just to add to the confusion over nomenclature, Emmanuel Pariselle (and possibly other French luthiers) uses the word 'valves' with reference to the rubber bits below the buttons into which the buttons are screwed!  >:E
Logged
Bob in beautiful Wensleydale, Les Panards Dansants, Crook Morris and the Loose Knit Band.
Clément Guais 3-row D/G/acc.; Castagnari 1914 D/G; Karntnerland Steirische 3-row G/C/F; Ellis Pariselle 2.6-row D/G/acc.; Gabbanelli Compact 2-row D/G with lots of bling, pre-war Hohner Bb/F; Acadian one-row in D.

Stiamh

  • Old grey C#/D pest
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3611
    • Packie Manus Byrne
Re: Plywood v's solid wood for contruction?
« Reply #58 on: September 28, 2011, 02:16:18 PM »

Continuing with the idle linguistic musing, and changing one letter: Andy S, how would you react if invited to partake of a fondu? Remonstrate that "melted" is a perfectly good English word? I suppose anybody who would serve a fondu is pretentious no matter what they called it...  >:E

See that thing in the distance behind you?. It's the point, you've just missed it. ;D


Just winding you up, lad. I would say "soundboard" myself.
« Last Edit: September 28, 2011, 02:21:00 PM by Steve Jones »
Logged

Telemorris

  • Respected Sage
  • ****
  • Offline Offline
  • Posts: 405
  • C/F Preciosa
Re: Plywood v's solid wood for contruction?
« Reply #59 on: September 28, 2011, 04:59:18 PM »

Is it worth starting a poll to find out what the group as a whole prefers? That way we could get to some sort of agreement about the term and also back to the main topic of the thread.

I'll put one together if there's an interest.

Correction, I did put a poll together:

« Last Edit: September 28, 2011, 05:29:09 PM by Telemorris »
Logged
Ed Stevens
Bridgetown Morris Men
Portland, Oregon, US
Erica D/G, Presswood Pokerwork G/C, Preciosa C/F
Pages: 1 2 [3] 4   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal