Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: 1 [2] 3   Go Down

Author Topic: Replacing valves  (Read 12512 times)

0 Members and 1 Guest are viewing this topic.

Quebecois

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1206
  • Accordez-vous donc, c'est si beau, l'accordéon!
Re: Replacing valves
« Reply #20 on: May 29, 2012, 07:32:56 PM »

The larger valves (for the larger reeds) have more layers , just pick the valve closest to the size of the reed and trim if necessary (trim all the layers by the same amount)

Wise words  ;)

I also punch a hole at the base of the valves using a leather punch. It makes them easier to install with their base around the reed rivets, especially the leather valves.
Logged
Hohner Morgane D/G, pre-Erica Hohner in C/F and G/C,
Hohner Erica A/D, Roland FR-18

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Replacing valves
« Reply #21 on: May 29, 2012, 08:22:14 PM »

I also do this with Vinyl ones like Hohner do at the factory
Logged
Q: How do you cure MAD?
A: Buy more Boxes

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Replacing valves
« Reply #22 on: May 29, 2012, 08:57:06 PM »

Please do NOT punch holes in non-Hohner  valves!
« Last Edit: May 29, 2012, 09:02:39 PM by diatonix »
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Replacing valves
« Reply #23 on: May 29, 2012, 09:54:11 PM »

I hear you - but why not?

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

diatonix

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 622
Re: Replacing valves
« Reply #24 on: May 29, 2012, 10:07:22 PM »

Because, if told, Mr. Reichelt, owner of the Klingenthal based Moritz Grimm accordion valve factory and now well into his eighties, would certainly suffer a heart attack.
Logged

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Replacing valves
« Reply #25 on: May 29, 2012, 10:14:46 PM »

Well, that wasn't the answer I was expecting  ???

I wouldn't, but only because I think it would affect the characteristics and longevity of the valve (although I do like the punched Hohner valves).

I can't see it being a problem with leather valves, but I haven't had the urge to do it with leather valves.
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Replacing valves
« Reply #26 on: May 29, 2012, 10:36:17 PM »

Some leather valves in old German accordions are pretty sweet. I wouldn't put holes in them. The nicest ones I've encountered are white/off-white in color and these are appreciably soft and floppy. If you can get them to lay flat and restore some of the nap on the underside, they're worth the time. On the other hand, some of the old leather valves were tanned poorly and are just the opposite, not worth restoring. 

waltzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 943
Re: Replacing valves
« Reply #27 on: May 29, 2012, 10:41:49 PM »

Holes in the valves for the rivets are unnecessary.  You just butt the end of the valve up against the rivet.  Plenty of gluing surface.
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Re: Replacing valves
« Reply #28 on: May 29, 2012, 10:43:19 PM »

Well, I inspected the Vinyl valves from Charlie marshall and compared them to the Hohner ones which had fallen off (1 Row 1040) and they were no less together after punching rivet sized holes in than the Originals , they stuck down easily and lay nice and flat... I`ve never seen a hole punched in a leather one though.
Logged
Q: How do you cure MAD?
A: Buy more Boxes

MadDogMurdock

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
Re: Replacing valves
« Reply #29 on: May 30, 2012, 01:33:08 AM »

The nicest ones I've encountered are white/off-white in color and these are appreciably soft and floppy. If you can get them to lay flat and restore some of the nap on the underside, they're worth the time. On the other hand, some of the old leather valves were tanned poorly and are just the opposite, not worth restoring.

Finding good leather valves is a bit of a gamble and I understand the urge to save the nicer leathers, but what technique works?  The restoration video with Jehan Paul shows him using a "silicone free preparation" to restore leather valves.  What is that?  Is this worthwhile? 
Logged

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Replacing valves
« Reply #30 on: May 30, 2012, 10:55:39 PM »

The nicest ones I've encountered are white/off-white in color and these are appreciably soft and floppy. If you can get them to lay flat and restore some of the nap on the underside, they're worth the time. On the other hand, some of the old leather valves were tanned poorly and are just the opposite, not worth restoring.

Finding good leather valves is a bit of a gamble and I understand the urge to save the nicer leathers, but what technique works?  The restoration video with Jehan Paul shows him using a "silicone free preparation" to restore leather valves.  What is that?  Is this worthwhile?

Is this an online video and if so, do you have a link? My experience to restoring leather valves involves pulling a square corner of a straight edge over the smooth side, and using a toothbrush to restore the nap on the other side. It's been moderately successful, I'd be interested to know about a chemical solution that is a "real" fix. Admittedly I don't know much about leather restoration, which is a whole subject in and of itself.

blafleur

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 530
Re: Replacing valves
« Reply #31 on: May 31, 2012, 02:50:47 AM »

I really think the only "real" fix for leathers, other than short term hold over fixes, is replacement.

MadDogMurdock

  • Good talker
  • **
  • Offline Offline
  • Posts: 80
Re: Replacing valves
« Reply #32 on: May 31, 2012, 06:10:33 AM »

Is this an online video and if so, do you have a link?

No, it's a Lark in the Morning video on concertina and box repair made in the 80's by the looks of the outfits and set.  A pretty hilarious couple of guys in a very relaxed setting (drinking schnapps throughout the video) showing basic repairs.  He doesn't give any details other than "a preparation", so I wasn't sure. 
Logged

Adam-T

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1789
  • Hohner Corso
Valve Stroking
« Reply #33 on: May 31, 2012, 11:20:49 AM »

have a look at this page, it covers the art of "Valve Stroking"  to revitalize old leather .. the whole site has interesting info regarding box repair in general

http://talkingreeds.com/reed-valves/
Logged
Q: How do you cure MAD?
A: Buy more Boxes

Andy Simpson

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 938
Re: Replacing valves
« Reply #34 on: May 31, 2012, 11:33:08 AM »

I really think the only "real" fix for leathers, other than short term hold over fixes, is replacement.

I agree.

Valves have a limited useful life and are quick and easy to replace. We've long since moved on from the information scarce pre-internet age and replacements are easily obtainable so I can't think of a good reason why anyone would even bother trying to restore old leather valves.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Valve Stroking
« Reply #35 on: May 31, 2012, 12:20:22 PM »

have a look at this page, it covers the art of "Valve Stroking"  to revitalize old leather .. the whole site has interesting info regarding box repair in general

http://talkingreeds.com/reed-valves/

But I get the feeling that some of it is untried eg
"It is understood leather can be restored to some extent by application of neat’s foot oil though this has not been tried."
Neatsfoot oil is pretty coarse stuff and is designed for making leather water resistant for outdoor use, eg for boots and horse tack. It remains tacky in the long term and has the potential to be a dust magnet.   It can also cause some glues to fail, as some amateur concertina repairers have found out the hard way.  To even suggest it for use on the fine leather used for reed valves seems to me to be irresponsible.   

As Blafleur and Andy Simpsone has said, if valves are old, stiff and not lying flat replace them with new.  Anything else is only a temporary measure.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

malcolmbebb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2628
  • In dampest Dorset, on the soggy south coast.
Re: Replacing valves
« Reply #36 on: May 31, 2012, 01:15:04 PM »

Someone on Ebay is selling synthetic leather valves. (Item 290718957543). Seems pricey, but could be a half-way house in an older instrument to maintain a degree of originality whilst using newer materials.

Any comments on how these compare?

Malcolm
Logged
Dino BPII.
"Tradition is not the worship of ashes, but the preservation of fire."

Lester

  • MADman
  • Mods and volunteers
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 9327
  • Hohners'R'me
    • Lester's Melodeon Emporium and Tune-a-Rama
Re: Replacing valves
« Reply #37 on: May 31, 2012, 01:40:26 PM »

Someone on Ebay is selling synthetic leather valves. (Item 290718957543). Seems pricey, but could be a half-way house in an older instrument to maintain a degree of originality whilst using newer materials.

Any comments on how these compare?

Malcolm

Looks like they are the same as Charlie Marshall's Synthetic/Vinyl valves which he sells at £9.50 per 100 so the eBay ones at £5.20 for 5 seem to be a tad expensive  :o

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Replacing valves
« Reply #38 on: May 31, 2012, 08:25:13 PM »

I've seen the Talking Reeds page. I've never used springs on old melodeon leathers, seems like I'd just as soon buy new leathers or vinyl valves if I were going to shell out for springs. What I've done in the past to 'restore' leathers amounts to corner cutting, basically, which is what I was after. I've done this exactly twice, experimented at no cost to me and was surprised by the results. The leathers weren't badly curled and seemed of higher than usual quality, and these were the reasons I was inclined to save them. If I want an overhaul, the whole job, obviously new valves are in order. But it's worth a few minutes of your time if you're inclined to tinker for fun.

Christopher K.

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 894
Re: Valve Stroking
« Reply #39 on: May 31, 2012, 08:28:00 PM »

Quote
As Blafleur and Andy Simpsone has said, if valves are old, stiff and not lying flat replace them with new.  Anything else is only a temporary measure.

I should have added this part of Theo's post in mine. If the leathers are old, stiff and not flat then they're obviously destined for the bin. But the leathers I was talking about seemed to be in much better condition, or better quality to begin with, so that's why I tried to salvage them.
Pages: 1 [2] 3   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal