Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Pete Dunk on March 24, 2009, 11:19:53 PM

Title: !**~#:x
Post by: Pete Dunk on March 24, 2009, 11:19:53 PM
Now most people who know me well would tell you that I have the patience of Job with inanimate objects. I can get angry and frustrated with people because they should know better but a thing is just a thing and it can't help being what it is, unlike the twerp that designed it.

Some objects are by their very nature fiddly; usually because someone has had to do a workaround to make the implausible a reality. Such would seem to be the case with *!^+&%$ Hohner $!%(£|\ Lilliput!

It was such a simple task you know, "let's take a look at the treble pallets to see what's involved in getting them off and refacing them". Hmm! First off the treble grille isn't fitted to a removable frame held in place by a couple of bellows pins or screws; just two screws holding it on to integral cheeks; ok, we'll have those out then. Hang on a minute it looks like it's tucked in behind the fingerboard cover. I'll never get it back on while that's in place, not a problem, four screws and I'll have it out of the way. Hmm! Snug fit that, doesn't want to budge. Wait a minute, the fingerboard edge is held on by three screws - so if I take those out I'll be able to lever the fingerboard off.

T'was indeed so, off came the fingerboard with no problem. At this point twenty five buttons flopped all over the place.  :o

Several words that don't appear in any dictionary were spoken in the twenty minutes or so it took me to figure out how to put it back together; only to realise that I hadn't taken a blind bit of notice of the pallets!

So Theo, how much to fettle an old Lilliput?  ::)
Title: Re: !**~#:x
Post by: Theo on March 24, 2009, 11:53:38 PM

So Theo, how much to fettle an old Lilliput?  ::)

If you think that's bad you should try working on the reeds of a Hohner Preciosa.

Or even worse trying to rebuild the wooden action  of a cheap Saxony built melodeon, cos they aren't even worth the effort.
Title: Re: !**~#:x
Post by: an bosca ceoil on March 25, 2009, 06:35:27 PM
Quote
Hang on a minute it looks like it's tucked in behind the fingerboard cover. I'll never get it back on while that's in place, not a problem, four screws and I'll have it out of the way. Hmm! Snug fit that, doesn't want to budge. Wait a minute, the fingerboard edge is held on by three screws - so if I take those out I'll be able to lever the fingerboard off.
Sorry!
 I could have warned you, but assumed you would find it easier to take the pallets off with the mechanism in situ. (The grille ought only to be slotted into a groove the cover unless this one is different?)
Title: Re: !**~#:x
Post by: Pete Dunk on March 25, 2009, 08:46:47 PM
Sorry!
 I could have warned you, but assumed you would find it easier to take the pallets off with the mechanism in situ. (The grille ought only to be slotted into a groove the cover unless this one is different?)

No worries; on reflection it was an interesting exercise  ;D  Yep, the grille edge slips into a slot cut in the fingerboard but I'm not used to such clever design features on Hohners. I'm very impressed with the build quality of this tiny box, it's far more craftsman like than the old pre-Corso I've been working on.

Bellows gasket question next. I reckon it's leaking like a sieve, but this one has leather gaskets fitted to the box ends rather than the bellows frames; is it ok to use self adhesive 2mm thick neoprene as a replacement and does it make any difference if it's fitted to the bellows frames or box ends?
SimplePortal 2.3.5 © 2008-2012, SimplePortal