Now most people who know me well would tell you that I have the patience of Job with inanimate objects. I can get angry and frustrated with people because they should know better but a thing is just a thing and it can't help being what it is, unlike the twerp that designed it.
Some objects are by their very nature fiddly; usually because someone has had to do a workaround to make the implausible a reality. Such would seem to be the case with *!^+&%$ Hohner $!%(£|\ Lilliput!
It was such a simple task you know, "let's take a look at the treble pallets to see what's involved in getting them off and refacing them". Hmm! First off the treble grille isn't fitted to a removable frame held in place by a couple of bellows pins or screws; just two screws holding it on to integral cheeks; ok, we'll have those out then. Hang on a minute it looks like it's tucked in behind the fingerboard cover. I'll never get it back on while that's in place, not a problem, four screws and I'll have it out of the way. Hmm! Snug fit that, doesn't want to budge. Wait a minute, the fingerboard edge is held on by three screws - so if I take those out I'll be able to lever the fingerboard off.
T'was indeed so, off came the fingerboard with no problem. At this point twenty five buttons flopped all over the place.

Several words that don't appear in any dictionary were spoken in the twenty minutes or so it took me to figure out how to put it back together; only to realise that I hadn't taken a blind bit of notice of the pallets!
So Theo, how much to fettle an old Lilliput?
