Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Suzanne Perron on March 06, 2015, 11:43:03 PM

Title: Get rid of mildew smells?
Post by: Suzanne Perron on March 06, 2015, 11:43:03 PM
Is there any way to safely get rid of mildew smells from an accordion? I recently opened one that apparently has been in its wood case a bit over long and it and the case are distinctly mildewy smelling...in fact the accordion breathes this in your face as it is played. What if anything can be done to dissipate the smell?
Title: Re: Get rid of mildew smells?
Post by: gettabettabox on March 07, 2015, 12:42:39 AM
the smelly, usually cigarette-smoke infused accordions/melodeons that i've come across, i've opened up and sprayed a good quality eau de toilette on the inner woodwork, avoiding any mechanical bits. (if it's a powerful smell, i usually squirt a bit on the inside of the bellows, but i think i could be scolded for this on here.)
worth a little squirt in the carry case as well. - however, these are boxes for keeping usually, so i've always used something that i would like to use personally!

i have a 60's single row melodeon, baited with chanel ''allure,'' but it hasn't worked for me yet!   (:)
Title: Re: Get rid of mildew smells?
Post by: TomB on March 07, 2015, 12:46:25 AM
Clean with vinegar (not the reeds) then dust with baking soda. Leave bellows open as far as possible in dry well ventilated place for as long as possible. The vinegar smell disperses in a few minutes and the dry baking soda loves to soak up nasty smells. Finally, never store your box in a case for long periods unused, been there, done it, 'orrible smell   ::)
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 01:03:13 AM
Clean with vinegar (not the reeds) then dust with baking soda. Leave bellows open as far as possible in dry well ventilated place for as long as possible. The vinegar smell disperses in a few minutes and the dry baking soda loves to soak up nasty smells. Finally, never store your box in a case for long periods unused, been there, done it, 'orrible smell   ::)

How do I clean with vinegar? Erm..its wet. Bad for reeds? As is or diluted? I could see spritzing it with that if it dries quickly....it is good for odors...but bad for metal. Baking soda...then should I vacuum it off?
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 01:09:26 AM
the smelly, usually cigarette-smoke infused accordions/melodeons that i've come across, i've opened up and sprayed a good quality eau de toilette on the inner woodwork, avoiding any mechanical bits. (if it's a powerful smell, i usually squirt a bit on the inside of the bellows, but i think i could be scolded for this on here.)
worth a little squirt in the carry case as well. - however, these are boxes for keeping usually, so i've always used something that i would like to use personally!

i have a 60's single row melodeon, baited with chanel ''allure,'' but it hasn't worked for me yet!   (:)
Well around here we could stick some orange peel inside...or else if we can sell it to my daughters friends..loves baby soft Cologne fans only.  ;D
Title: Re: Get rid of mildew smells?
Post by: boxcall on March 07, 2015, 01:15:57 AM
Hi Suzanne,
 Welcome to the forum. I'm sorry to hear about Peter! I did not know him personally, as I only spoke to him over the phone when He did some work on my box. He was very easy to talk to and His knowlegde and Skills will be missed. I'm a friend of Paul Groff and a student of one of Paul's mentors
Jack Conroy from the boston area.
 I would think it would need a cleaning, wiping down the wood or case if you plan on put it back in latter. maybe something like murphys oil soap?) with cotton rag wrung so almost dry then followed by dry rag and air dry it. It would be good to know what kind of box you'd be cleaning eg Wood, material etc.  I would think most of the smell would be in the bellows ( I bought an older box that still has the faint smell of an old house or attic but it's gotten better since leaving it out of it's case) I don't see why you coudn't wipe the bellows down with dampen but almost dry cloth as best you can then dry cloth then open them up to air dry completely. I did this to my bellows just to clean dirt off , it looks and smells better. ( I only used water for this) you may need something more? I assume if the box is wood you could do something similar with MOS? being careful not to get on metal parts if even needed. 
Others may have better solutions. If mildew has got deep into recesses could be a bit of work to take things apart to get rid of smell completely.
Take care,
Michael
 


Title: Re: Get rid of mildew smells?
Post by: rees on March 07, 2015, 01:27:38 AM
Get deep into them bellows folds, inside and outside. There be vileness in there  :o
Title: Re: Get rid of mildew smells?
Post by: boxcall on March 07, 2015, 01:32:46 AM
Just to add when cleaning mold and mildew off wood in say your house some people recomended
 vinager but regular soap and water is as good or better and smells better too.
and perfume could put off some.
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 01:42:28 AM
Thanks for all the replies  (:)
But how is wet stuff best applied?
Vinegar? Concentrated or diluted? Spritzed or wiped?
Baking soda? Sprinkled and vacuumed?

ps . I haven't dared open a box at this point...I break other stuff...

Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 01:51:49 AM
Hi Suzanne,
 Welcome to the forum. I'm sorry to hear about Peter! I did not know him personally, as I only spoke to him over the phone when He did some work on my box. He was very easy to talk to and His knowlegde and Skills will be missed. I'm a friend of Paul Groff and a student of one of Paul's mentors
Jack Conroy from the boston area.
 I would think it would need a cleaning, wiping down the wood or case if you plan on put it back in latter. maybe something like murphys oil soap?) with cotton rag wrung so almost dry then followed by dry rag and air dry it. It would be good to know what kind of box you'd be cleaning eg Wood, material etc.  I would think most of the smell would be in the bellows ( I bought an older box that still has the faint smell of an old house or attic but it's gotten better since leaving it out of it's case) I don't see why you coudn't wipe the bellows down with dampen but almost dry cloth as best you can then dry cloth then open them up to air dry completely. I did this to my bellows just to clean dirt off , it looks and smells better. ( I only used water for this) you may need something more? I assume if the box is wood you could do something similar with MOS? being careful not to get on metal parts if even needed. 
Others may have better solutions. If mildew has got deep into recesses could be a bit of work to take things apart to get rid of smell completely.
Take care,
Michael
 

TY, Michael.
Title: Re: Get rid of mildew smells?
Post by: Grape Ape on March 07, 2015, 02:15:30 AM
Just don't use Fabreeze like someone did (unnecessarily I might add) on one of my boxes.  Took forever for that hideous smell to go away!
Title: Re: Get rid of mildew smells?
Post by: Malcolm Clapp on March 07, 2015, 02:29:22 AM
A clothespeg on the nose sometimes helps....or keep it aside to play only when you have a cold.  >:E

In more serious vein, sunlight can help. Remove the reed blocks first though, and keep an eye on the weather.

Good luck.
Title: Re: Get rid of mildew smells?
Post by: Steve_freereeder on March 07, 2015, 10:27:54 AM
Just don't use Fabreeze like someone did (unnecessarily I might add) on one of my boxes.  Took forever for that hideous smell to go away!
Actually Febreeze is quite good at removing musty smells caused by storage in damp conditions. You have to (a) find a fragrance that you like (and it doesn't last that long), and (b) not use too much of it.

I've found the best way is to use a small quantity on a soft brush and work it into the folds of the bellows - just enough to dampen it slightly - definitely no saturation needed here, otherwise the glue could become loosened. It's best doing this with the bellows completely removed from the instrument ends. Then leave the bellows to dry thoroughly. Any residual Febreeze fragrance dissipates after a few days.

But before you even start on the Febreeze treatment, it's definitely worth spending time dry-brushing and vacuuming any dust and muck from the bellows folds, inside and out.
Title: Re: Get rid of mildew smells?
Post by: Theo on March 07, 2015, 12:47:50 PM
Took the words right out of my fingers Steve - about a thorough de-dusting.
I've also found Febreze very effective, and the type I use has no smell that I'm aware of.
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 01:42:32 PM
I was going to ask about Febreeze but expected cries of protest. Makes sense to get the dust out first especially before getting moisture on there. I think I'll take it to work and use one of the air nozzles in the lab like our office geek does with computer components.

Ill get some to show me how to take the ends off, Ive been too nervous to try this myself but people like pics of the insides too so I should learn.

Thanks for the help (:)

Suzanne
Title: Re: Get rid of mildew smells?
Post by: fc diato on March 07, 2015, 02:21:26 PM
If you are selling the box, you might consider holding off on Febreze until last resort. I have a friend who is deathly allergic - and this kind of affliction seems to be becoming more common.

I once used baking soda and it did a wonderful job.  On a very dry day (to avoid clumping and sticking), I dusted all the folds, let it sit for the day, then vaccuumed it out.

I have not used vinegar, but guess that it would further assure success - I use it often for other stuff - and any residual smell does dissipate after a few days:  I would do a 1 part white vineger to 4 parts water; only use a soft cloth wrung out as much as possible (damp cloth, not wet) and a gentle wipe down .. followed by the baking soda treatment.

THEN - if it still does not do the job, you can always resort to the big chemical guns and masking perfumes.
Good luck.
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 02:33:39 PM
Good input! Its true that some people are really sensitive to odors that don't bother others.
Title: Re: Get rid of mildew smells?
Post by: TomB on March 07, 2015, 03:38:26 PM
Hi, just got back to this thread, all good replies. I use the white vinegar neat straight from the bottle and it's never done any damage to my accordions, etc. Clean bellows folds BEFORE applying any damp cloth. I was told NOT to use an air line as this can drive the spores into the bellows material but to vacuum off instead ( I don't know how true that would be but it seems to make sense). As Malcolm says, sunlight is also natures way of killing bugs without harming the accordion.
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 07, 2015, 04:18:25 PM
Ok, no air then. TY
Title: Re: Get rid of mildew smells?
Post by: Steve_freereeder on March 08, 2015, 01:15:51 AM
Ill get some to show me how to take the ends off, Ive been too nervous to try this myself but people like pics of the insides too so I should learn.

Just pull out the bellows pins with a straight upward pull using a pair of pliers. Be sure to lay the pins in sequence somewhere safe so that you can re-insert the same pin into the same hole on reassembly. Sometimes the pins are of slightly differing diameters even on the same instrument.

Once you have the pins removed, just ease the bellows frame away from the ends of the instrument. If you are removing the bellows completely, make a pencil mark on the inside end of the bellows so that you can reassemble it the correct way round.

To reinsert the bellows pins, just support the pin shank with your fingers to stop it falling sideways and push down on the pin with a blunt hard object (pliers handle, screwdriver handle, etc). It should not be necessary to hammer the pin. If you find the pin will not go back in with a straight push, check that you have the bellows the correct way round and that the instrument end is firmly seated against the bellows gasket.

Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 08, 2015, 04:07:45 PM
Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?
Title: Re: Get rid of mildew smells?
Post by: boxcall on March 08, 2015, 04:22:54 PM
It's glue on to one side so not likely to damage it, would be my guess.
But if you did it's probably easier to fix than the mildew ;)
Title: Re: Get rid of mildew smells?
Post by: Steve_freereeder on March 08, 2015, 05:22:54 PM
Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?

Don't be afraid of the bellows gasket. If it is still functioning OK, then opening up the box a few times isn't going to cause much deterioration, if any.

On the other hand, if the bellows gasket is old and very compressed, it is probably not doing its job anyway and it would be much better to replace it. It is surprising how much improvement can be made to the response and air-tightness simply by replacing the bellows gasket, even if there seems to be no obvious air leakage.

Replacing the gasket is one of the easier jobs in melodeon maintenance. You need to pull off the old gasket and scrape off the remains of any glue (usually quite gungy) and replace it with the proper stuff obtainable from Charlie Marshall here:

http://www.cgmmusical.co.uk
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html

The new gasket material is self-adhesive. Just lay it on in position a bit at a time, pressing it gently into place and removing the backing paper bit by bit. Take care not to stretch the gasket whilst applying it - just nice and relaxed is fine. Ease it round the corners - it is very flexible. To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

 

Title: Re: Get rid of mildew smells?
Post by: Lester on March 08, 2015, 05:24:59 PM
To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap at a shallow angle to make a diagonal but joint.
Title: Re: Get rid of mildew smells?
Post by: boxcall on March 08, 2015, 05:27:41 PM
Good Idea Lester!!
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 08, 2015, 05:48:03 PM
To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap at a shallow angle to make a diagonal but joint.

Makes sense, know that trick in wallpapering. (:)
Title: Re: Get rid of mildew smells?
Post by: Suzanne Perron on March 08, 2015, 05:49:54 PM
Thanks for the detailed description. sounds pretty straightforward...but just wondering about the gasket, might I not end up with a leakier accordion than I started with if I disrupt a union that has been seated together for a very long time? I don't really have a choice with the mildew box...but it could be a bad idea to just open boxes for reed pictures as I mentioned earlier...does that happen sometimes?

Don't be afraid of the bellows gasket. If it is still functioning OK, then opening up the box a few times isn't going to cause much deterioration, if any.

On the other hand, if the bellows gasket is old and very compressed, it is probably not doing its job anyway and it would be much better to replace it. It is surprising how much improvement can be made to the response and air-tightness simply by replacing the bellows gasket, even if there seems to be no obvious air leakage.

Replacing the gasket is one of the easier jobs in melodeon maintenance. You need to pull off the old gasket and scrape off the remains of any glue (usually quite gungy) and replace it with the proper stuff obtainable from Charlie Marshall here:

http://www.cgmmusical.co.uk
http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Gasket.html

The new gasket material is self-adhesive. Just lay it on in position a bit at a time, pressing it gently into place and removing the backing paper bit by bit. Take care not to stretch the gasket whilst applying it - just nice and relaxed is fine. Ease it round the corners - it is very flexible. To make the final join back at the starting point, overlap a short length of the gasket, say 1 cm, then with a sharp blade, carefully cut through both layers of overlap. Remove the excess portions and that's it - job done!

You are a great describer! Something that sounds easy enough to try if one gets in a pickle...I probably have some here...somewhere. TY
Title: Re: Get rid of mildew smells?
Post by: Steve_freereeder on March 08, 2015, 05:53:49 PM
You are a great describer!
Thank you Suzanne.  :|bl

... at a shallow angle to make a diagonal butt joint.

Yes - I do this too. I should have mentioned it in my description, sorry....
Title: Re: Get rid of mildew smells?
Post by: Nick Collis Bird on March 09, 2015, 07:01:05 AM
All the above of is right of course. BUT. It's worth mentioning that new gasket material will be thicker than the original because it's not yet been compressed. You may have to push the end plates quite hard to get the pins to slide in easily.
Title: Re: Get rid of mildew smells?
Post by: Johnniez on June 17, 2015, 12:52:16 PM
Some good old 'hooker' $2 perfume from WoolWorth would do the trick me thinks.. ;-)
SimplePortal 2.3.5 © 2008-2012, SimplePortal