Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1] 2   Go Down

Author Topic: Get rid of mildew smells?  (Read 9668 times)

0 Members and 1 Guest are viewing this topic.

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Get rid of mildew smells?
« on: March 06, 2015, 11:43:03 PM »

Is there any way to safely get rid of mildew smells from an accordion? I recently opened one that apparently has been in its wood case a bit over long and it and the case are distinctly mildewy smelling...in fact the accordion breathes this in your face as it is played. What if anything can be done to dissipate the smell?
Logged
Selling as szmaine on US eBay!

gettabettabox

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 684
Re: Get rid of mildew smells?
« Reply #1 on: March 07, 2015, 12:42:39 AM »

the smelly, usually cigarette-smoke infused accordions/melodeons that i've come across, i've opened up and sprayed a good quality eau de toilette on the inner woodwork, avoiding any mechanical bits. (if it's a powerful smell, i usually squirt a bit on the inside of the bellows, but i think i could be scolded for this on here.)
worth a little squirt in the carry case as well. - however, these are boxes for keeping usually, so i've always used something that i would like to use personally!

i have a 60's single row melodeon, baited with chanel ''allure,'' but it hasn't worked for me yet!   (:)
Logged

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Get rid of mildew smells?
« Reply #2 on: March 07, 2015, 12:46:25 AM »

Clean with vinegar (not the reeds) then dust with baking soda. Leave bellows open as far as possible in dry well ventilated place for as long as possible. The vinegar smell disperses in a few minutes and the dry baking soda loves to soak up nasty smells. Finally, never store your box in a case for long periods unused, been there, done it, 'orrible smell   ::)
Logged

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #3 on: March 07, 2015, 01:03:13 AM »

Clean with vinegar (not the reeds) then dust with baking soda. Leave bellows open as far as possible in dry well ventilated place for as long as possible. The vinegar smell disperses in a few minutes and the dry baking soda loves to soak up nasty smells. Finally, never store your box in a case for long periods unused, been there, done it, 'orrible smell   ::)

How do I clean with vinegar? Erm..its wet. Bad for reeds? As is or diluted? I could see spritzing it with that if it dries quickly....it is good for odors...but bad for metal. Baking soda...then should I vacuum it off?
« Last Edit: March 07, 2015, 01:04:57 AM by Suzanne Perron »
Logged
Selling as szmaine on US eBay!

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #4 on: March 07, 2015, 01:09:26 AM »

the smelly, usually cigarette-smoke infused accordions/melodeons that i've come across, i've opened up and sprayed a good quality eau de toilette on the inner woodwork, avoiding any mechanical bits. (if it's a powerful smell, i usually squirt a bit on the inside of the bellows, but i think i could be scolded for this on here.)
worth a little squirt in the carry case as well. - however, these are boxes for keeping usually, so i've always used something that i would like to use personally!

i have a 60's single row melodeon, baited with chanel ''allure,'' but it hasn't worked for me yet!   (:)
Well around here we could stick some orange peel inside...or else if we can sell it to my daughters friends..loves baby soft Cologne fans only.  ;D
Logged
Selling as szmaine on US eBay!

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Get rid of mildew smells?
« Reply #5 on: March 07, 2015, 01:15:57 AM »

Hi Suzanne,
 Welcome to the forum. I'm sorry to hear about Peter! I did not know him personally, as I only spoke to him over the phone when He did some work on my box. He was very easy to talk to and His knowlegde and Skills will be missed. I'm a friend of Paul Groff and a student of one of Paul's mentors
Jack Conroy from the boston area.
 I would think it would need a cleaning, wiping down the wood or case if you plan on put it back in latter. maybe something like murphys oil soap?) with cotton rag wrung so almost dry then followed by dry rag and air dry it. It would be good to know what kind of box you'd be cleaning eg Wood, material etc.  I would think most of the smell would be in the bellows ( I bought an older box that still has the faint smell of an old house or attic but it's gotten better since leaving it out of it's case) I don't see why you coudn't wipe the bellows down with dampen but almost dry cloth as best you can then dry cloth then open them up to air dry completely. I did this to my bellows just to clean dirt off , it looks and smells better. ( I only used water for this) you may need something more? I assume if the box is wood you could do something similar with MOS? being careful not to get on metal parts if even needed. 
Others may have better solutions. If mildew has got deep into recesses could be a bit of work to take things apart to get rid of smell completely.
Take care,
Michael
 


« Last Edit: March 07, 2015, 01:26:48 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

rees

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 5055
  • Windjammer
    • Wesson Accordions
Re: Get rid of mildew smells?
« Reply #6 on: March 07, 2015, 01:27:38 AM »

Get deep into them bellows folds, inside and outside. There be vileness in there  :o
Logged
Rees Wesson (accordion builder and mechanic)
Gungrog, Welshpool, Wales, UK
www.melodeons.com

boxcall

  • You got to love it!!!
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1801
Re: Get rid of mildew smells?
« Reply #7 on: March 07, 2015, 01:32:46 AM »

Just to add when cleaning mold and mildew off wood in say your house some people recomended
 vinager but regular soap and water is as good or better and smells better too.
and perfume could put off some.
« Last Edit: March 07, 2015, 01:34:59 AM by boxcall »
Logged
Hohner 1040 C, Beltuna one row four stop D, O'Byrne Dewitt/ Baldoni bros. D/C#, Paolo soprani "pepperpot" one row D

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #8 on: March 07, 2015, 01:42:28 AM »

Thanks for all the replies  (:)
But how is wet stuff best applied?
Vinegar? Concentrated or diluted? Spritzed or wiped?
Baking soda? Sprinkled and vacuumed?

ps . I haven't dared open a box at this point...I break other stuff...

Logged
Selling as szmaine on US eBay!

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #9 on: March 07, 2015, 01:51:49 AM »

Hi Suzanne,
 Welcome to the forum. I'm sorry to hear about Peter! I did not know him personally, as I only spoke to him over the phone when He did some work on my box. He was very easy to talk to and His knowlegde and Skills will be missed. I'm a friend of Paul Groff and a student of one of Paul's mentors
Jack Conroy from the boston area.
 I would think it would need a cleaning, wiping down the wood or case if you plan on put it back in latter. maybe something like murphys oil soap?) with cotton rag wrung so almost dry then followed by dry rag and air dry it. It would be good to know what kind of box you'd be cleaning eg Wood, material etc.  I would think most of the smell would be in the bellows ( I bought an older box that still has the faint smell of an old house or attic but it's gotten better since leaving it out of it's case) I don't see why you coudn't wipe the bellows down with dampen but almost dry cloth as best you can then dry cloth then open them up to air dry completely. I did this to my bellows just to clean dirt off , it looks and smells better. ( I only used water for this) you may need something more? I assume if the box is wood you could do something similar with MOS? being careful not to get on metal parts if even needed. 
Others may have better solutions. If mildew has got deep into recesses could be a bit of work to take things apart to get rid of smell completely.
Take care,
Michael
 

TY, Michael.
Logged
Selling as szmaine on US eBay!

Grape Ape

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1209
Re: Get rid of mildew smells?
« Reply #10 on: March 07, 2015, 02:15:30 AM »

Just don't use Fabreeze like someone did (unnecessarily I might add) on one of my boxes.  Took forever for that hideous smell to go away!
Logged

Malcolm Clapp

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1119
  • Loving my Hohner-reeded wet MMM CastaTommy
Re: Get rid of mildew smells?
« Reply #11 on: March 07, 2015, 02:29:22 AM »

A clothespeg on the nose sometimes helps....or keep it aside to play only when you have a cold.  >:E

In more serious vein, sunlight can help. Remove the reed blocks first though, and keep an eye on the weather.

Good luck.
Logged
Tuner/repairer, now retired.

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Get rid of mildew smells?
« Reply #12 on: March 07, 2015, 10:27:54 AM »

Just don't use Fabreeze like someone did (unnecessarily I might add) on one of my boxes.  Took forever for that hideous smell to go away!
Actually Febreeze is quite good at removing musty smells caused by storage in damp conditions. You have to (a) find a fragrance that you like (and it doesn't last that long), and (b) not use too much of it.

I've found the best way is to use a small quantity on a soft brush and work it into the folds of the bellows - just enough to dampen it slightly - definitely no saturation needed here, otherwise the glue could become loosened. It's best doing this with the bellows completely removed from the instrument ends. Then leave the bellows to dry thoroughly. Any residual Febreeze fragrance dissipates after a few days.

But before you even start on the Febreeze treatment, it's definitely worth spending time dry-brushing and vacuuming any dust and muck from the bellows folds, inside and out.
Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Get rid of mildew smells?
« Reply #13 on: March 07, 2015, 12:47:50 PM »

Took the words right out of my fingers Steve - about a thorough de-dusting.
I've also found Febreze very effective, and the type I use has no smell that I'm aware of.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #14 on: March 07, 2015, 01:42:32 PM »

I was going to ask about Febreeze but expected cries of protest. Makes sense to get the dust out first especially before getting moisture on there. I think I'll take it to work and use one of the air nozzles in the lab like our office geek does with computer components.

Ill get some to show me how to take the ends off, Ive been too nervous to try this myself but people like pics of the insides too so I should learn.

Thanks for the help (:)

Suzanne
Logged
Selling as szmaine on US eBay!

fc diato

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 146
Re: Get rid of mildew smells?
« Reply #15 on: March 07, 2015, 02:21:26 PM »

If you are selling the box, you might consider holding off on Febreze until last resort. I have a friend who is deathly allergic - and this kind of affliction seems to be becoming more common.

I once used baking soda and it did a wonderful job.  On a very dry day (to avoid clumping and sticking), I dusted all the folds, let it sit for the day, then vaccuumed it out.

I have not used vinegar, but guess that it would further assure success - I use it often for other stuff - and any residual smell does dissipate after a few days:  I would do a 1 part white vineger to 4 parts water; only use a soft cloth wrung out as much as possible (damp cloth, not wet) and a gentle wipe down .. followed by the baking soda treatment.

THEN - if it still does not do the job, you can always resort to the big chemical guns and masking perfumes.
Good luck.
Logged
fc diato

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #16 on: March 07, 2015, 02:33:39 PM »

Good input! Its true that some people are really sensitive to odors that don't bother others.
Logged
Selling as szmaine on US eBay!

TomB

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 514
  • BCC#, Cairden BC Mini and lots of PA's
Re: Get rid of mildew smells?
« Reply #17 on: March 07, 2015, 03:38:26 PM »

Hi, just got back to this thread, all good replies. I use the white vinegar neat straight from the bottle and it's never done any damage to my accordions, etc. Clean bellows folds BEFORE applying any damp cloth. I was told NOT to use an air line as this can drive the spores into the bellows material but to vacuum off instead ( I don't know how true that would be but it seems to make sense). As Malcolm says, sunlight is also natures way of killing bugs without harming the accordion.
Logged

Suzanne Perron

  • Regular debater
  • ***
  • Offline Offline
  • Posts: 113
Re: Get rid of mildew smells?
« Reply #18 on: March 07, 2015, 04:18:25 PM »

Ok, no air then. TY
Logged
Selling as szmaine on US eBay!

Steve_freereeder

  • Content Manager
  • Hero Member
  • ***
  • Offline Offline
  • Posts: 7511
  • MAD is inevitable. Keep Calm and Carry On
    • Lizzie Dripping
Re: Get rid of mildew smells?
« Reply #19 on: March 08, 2015, 01:15:51 AM »

Ill get some to show me how to take the ends off, Ive been too nervous to try this myself but people like pics of the insides too so I should learn.

Just pull out the bellows pins with a straight upward pull using a pair of pliers. Be sure to lay the pins in sequence somewhere safe so that you can re-insert the same pin into the same hole on reassembly. Sometimes the pins are of slightly differing diameters even on the same instrument.

Once you have the pins removed, just ease the bellows frame away from the ends of the instrument. If you are removing the bellows completely, make a pencil mark on the inside end of the bellows so that you can reassemble it the correct way round.

To reinsert the bellows pins, just support the pin shank with your fingers to stop it falling sideways and push down on the pin with a blunt hard object (pliers handle, screwdriver handle, etc). It should not be necessary to hammer the pin. If you find the pin will not go back in with a straight push, check that you have the bellows the correct way round and that the instrument end is firmly seated against the bellows gasket.

Logged
Steve
Sheffield, UK.
www.lizziedripping.org.uk
Pages: [1] 2   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal