Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Mike-T on October 12, 2015, 11:33:25 AM
-
Hi folks, I,m looking to making some reed blocks and wondering if anyone can advise me on best types of wood to use?
regards
Mike.
-
In a word Mike I don't know,but those I've seen seem to be ordinary soft wood, pine etc. As long as it's solid. That set me thinking (rare) how about 3D printing.
-
Older Hohners use alder, more recent ones obeche, Italian boxes often uses spruce and western red cedar, I've also seen maple or sycamore used too and occasionally mahogany. The base plate needs to be something more durable, I've seen beech, or other hardwoods used. And just for workability in small sections you want something with reasonably straight grain and free of knots and with an even texture. If you plan to fix the reeds with screws rather than wax then you need a timber that the screws can hold reliably.
-
I think Theo has it right, most bass blocks I've seen have been beech, but the teble are good straight grain softwood, though if you have the beech for a one-off I guess you'd use that for the treble blocks too. It does work beautifully to a fine finish. Wasn't there a video last weeek of blocks being laminated from layers of laser cut ply? I don't have a clue what types the varieties Theo named are - and I bet any local sources wouldn't either!
Rob.
-
I think I'd only use beech for the base plates. It is much harder than required for other parts. It can also be prone to warp unless very carefully seasoned.
-
Thanks guy's, as usual your very helpful, am now off down to local furniture factory scrounging offcuts >:E
regards
Mike.
-
I think I'd only use beech for the base plates. It is much harder than required for other parts. It can also be prone to warp unless very carefully seasoned.
Ah, that shows my limited experience as the only time I've worked with beech was when a local school threw out all their desks to be replaced by plastic tables. Must have been half a centruty old, so I guess that was well seasoned.
Rob.
-
Stormy Hyde in Oz has done some experiments with using veneered foam for reedblocks and he says that it works well. For reedblocks it appears that it is the surface properties which could, which means that you could use a wide range of woods to good effect.