Melodeon.net Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome to the new melodeon.net forum

Pages: [1]   Go Down

Author Topic: Reed blocks  (Read 1322 times)

0 Members and 1 Guest are viewing this topic.

Mike-T

  • Good talker
  • **
  • Offline Offline
  • Posts: 90
  • 1930s Hohner B C C#, D/GAcc Benny, 2.5 Beltuna
Reed blocks
« on: October 12, 2015, 11:33:25 AM »

Hi folks, I,m looking to making some reed blocks and wondering if anyone can advise me on best types of wood to use?
regards
Mike.
Logged

Nick Collis Bird

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3785
  • Been squeezing melodeons for over 48 years (badly)
Re: Reed blocks
« Reply #1 on: October 12, 2015, 11:58:47 AM »

In a word Mike I don't know,but those I've seen seem to be ordinary soft wood, pine etc. As long as it's solid. That set me thinking (rare) how about 3D printing.
Logged
Has anyone heard of the song. “ Broken Alarm-clock Blues” ? It starts   â€œI woke up this Afternoon”

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed blocks
« Reply #2 on: October 12, 2015, 12:25:46 PM »

Older Hohners use alder, more recent ones obeche, Italian boxes often uses spruce and western red cedar, I've also seen maple or sycamore used too and occasionally mahogany.   The base plate needs to be something more durable, I've seen beech, or other hardwoods used.  And just for workability in small sections you want something with reasonably straight grain and free of knots and with an even texture.  If you plan to fix the reeds with screws rather than wax then you need a timber that the screws can hold reliably.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed blocks
« Reply #3 on: October 12, 2015, 12:37:56 PM »

I think Theo has it right, most bass blocks I've seen have been beech, but the teble are good straight grain softwood, though if you have the beech for a one-off I guess you'd use that for the treble blocks too.  It does work beautifully to a fine finish.  Wasn't there a video last weeek of blocks being laminated from layers of laser cut ply?  I don't have a clue what types the varieties Theo named are - and I bet any local sources wouldn't either!

Rob.
Logged

Theo

  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 14475
  • Hohner Club Too
    • The Box Place
Re: Reed blocks
« Reply #4 on: October 12, 2015, 12:56:48 PM »

I think I'd only use beech for the base plates. It is much harder than required for other parts.  It can also be prone to warp unless very carefully seasoned.
Logged
Theo Gibb - Gateshead UK

Proprietor of The Box Place for melodeon and concertina sales and service.
See my YouTube channel  for videos on repair and tuning

Mike-T

  • Good talker
  • **
  • Offline Offline
  • Posts: 90
  • 1930s Hohner B C C#, D/GAcc Benny, 2.5 Beltuna
Re: Reed blocks
« Reply #5 on: October 12, 2015, 01:25:39 PM »

Thanks guy's, as usual your very helpful, am now off down to local furniture factory scrounging offcuts >:E
regards
Mike.
Logged

Rob2Hook

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2278
  • Castagnaris, Hohners & Baffetti
Re: Reed blocks
« Reply #6 on: October 12, 2015, 03:50:16 PM »

I think I'd only use beech for the base plates. It is much harder than required for other parts.  It can also be prone to warp unless very carefully seasoned.

Ah, that shows my limited experience as the only time I've worked with beech was when a local school threw out all their desks to be replaced by plastic tables.  Must have been half a centruty old, so I guess that was well seasoned.

Rob.
Logged

Owen Woods

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3894
  • melodeonmusic.com
    • The website and blog of Owen Woods
Re: Reed blocks
« Reply #7 on: October 13, 2015, 11:49:22 PM »

Stormy Hyde in Oz has done some experiments with using veneered foam for reedblocks and he says that it works well. For reedblocks it appears that it is the surface properties which could, which means that you could use a wide range of woods to good effect.
Logged
Bergflodt D/G 4 voice, Saltarelle Bouebe D/G, Super Preciosa D/Em, Hohner Impiliput B/C+C#

Latest blog post: In Any Weather

http://melodeonmusic.com/blog
Pages: [1]   Go Up
 


Melodeon.net - (c) Theo Gibb; Clive Williams 2010. The access and use of this website and forum featuring these terms and conditions constitutes your acceptance of these terms and conditions.
SimplePortal 2.3.5 © 2008-2012, SimplePortal